Page 1 of 2
Wipped it out this week!!
Posted: Fri Sep 05, 2014 10:37 pm
by "Wild Bad Bob"
I needed a step stool and a gong holder for the 5 O Clock Hour!;)
The goal here was the 2.5* angle on the construction, side and back. We can all make something, the key is to be unique, in wood, style, joinery, ect!!!
Posted: Fri Sep 05, 2014 10:42 pm
by idcook
Cool.
One of the more unusual projects I've seen here.
A gong holder.
What're the overall dimensions?
Posted: Fri Sep 05, 2014 10:44 pm
by "Wild Bad Bob"
Yea JPg, I worked with a professional pic taker, I am old school, still use 35mm film, in my Nikon F!!! That I bought with my paper route money in the 60s!!!! Saved it up for almost a year!!! Kids now a days!!! God help them and us!!!!
Posted: Fri Sep 05, 2014 10:47 pm
by "Wild Bad Bob"
Idcook. cant remember off the top, I will measure and post tomorrow,
So with out a separate post, what kinda wood is it????
Posted: Fri Sep 05, 2014 10:47 pm
by algale
That is great! You should post some photos of the build process.
Posted: Fri Sep 05, 2014 11:10 pm
by BuckeyeDennis
rbursek wrote:Idcook. cant remember off the top, I will measure and post tomorrow,
So with out a separate post, what kinda wood is it????
I'm going to guess that it's ash. With a base coat of stain, then sealer, and then the grain highlighted with a darker stain that stays down in the pores.
Posted: Fri Sep 05, 2014 11:17 pm
by algale
Ipe? Saw some recently that had wild grain like that.
Posted: Fri Sep 05, 2014 11:31 pm
by "Wild Bad Bob"
BuckeyeDennis wrote:I'm going to guess that it's ash. With a base coat of stain, then sealer, and then the grain highlighted with a darker stain that stays down in the pores.
You almost won!!! BD, Yes Ash, first dyed, with medium brown, then a wash coat of 1 1/2 cut Shellac, then buff with maroon pad, then stained with dark walnut, then 3 coasts of oil poly.
Dye first for color, then wash coat to seal the wood but not the pores, oil/pignant stain to fill the pours for depth and other color of choice/compliment!!!
Posted: Fri Sep 05, 2014 11:35 pm
by "Wild Bad Bob"
I Love Ash first 2.15 a Brd Ft at my supplier, can be totally white or a nice tannish. machines nicely, strong, closed pored.
Posted: Fri Sep 05, 2014 11:51 pm
by "Wild Bad Bob"
2 projects in motion, 2 drawers, one for under the ER DP, since a shorty only 13" wide. 11" deep. X the 15" front to back. Er lathe, same drawer sixw but 31" wide.
Dumpster diving, got black PB shelving for sides and back, fronts will be Ash, dyed black and then with the above prossess, stain black, Ebonised. The other is from grey elm, first time with that same price a brd ft. Going to dye it cherry, then a cherry stain, will post pics,
If the grain pattern is the same, yo0u can make any wood look like another!!!