1/2 Inch OSB Shelf

This is a forum for intermediate to advanced woodworkers. Show off your projects or share your ideas.

Moderator: admin

Post Reply
User avatar
rlkeeney
Platinum Member
Posts: 784
Joined: Fri Nov 14, 2008 5:53 am
Location: Tallahassee FL
Contact:

1/2 Inch OSB Shelf

Post by rlkeeney »

Don't ever let anyone tell you that you can't build something useful and good from OSB. I bought two sheets of 1/2 inch to cover my patio doors during a hurricane threat that didn't happen. When we needed some shelves for the bottom of our closets I made these from the unused OSB. That was more than thirty years ago and they have been in constant use. The shelves are in 1/8 inch deep dadoes and its held together with drywall screws. There is 170+ pounds on the top shelf in the photo and it barely sags.

Sadly it may not survive the recent flooding of my home. Note the wet area at the bottom.

Image
User avatar
dusty
Platinum Member
Posts: 21530
Joined: Wed Nov 22, 2006 6:52 am
Location: Tucson (Wildcat Country), Arizona

Re: 1/2 Inch OSB Shelf

Post by dusty »

Cut off the water damaged portion and it is still good to go with a smaller lower storage area.

OSB purchased today may be a different story; especially if you buy it at a box store.
"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.
User avatar
beeg
Platinum Member
Posts: 4790
Joined: Sun Oct 14, 2007 2:33 pm
Location: St. Louis,Mo.

Re: 1/2 Inch OSB Shelf

Post by beeg »

rlkeeney wrote:I bought two sheets of 1/2 inch to cover my patio doors during a hurricane threat that didn't happen.

It was shown on "This old house", that plywood held up MUCH better than OSB. The 9lb. 2X4 shot at the window, bounced off the plywood and went through the OSB.
SS 500(09/1980), DC3300, jointer, bandsaw, belt sander, Strip Sander, drum sanders,molder, dado, biscuit joiner, universal lathe tool rest, Oneway talon chuck, router bits & chucks and a De Walt 735 planer,a #5,#6, block planes. ALL in a 100 square foot shop.
.
.

Bob
mbcabinetmaker
Platinum Member
Posts: 1627
Joined: Thu Jul 20, 2006 6:18 am
Location: Greer SC

Re: 1/2 Inch OSB Shelf

Post by mbcabinetmaker »

beeg wrote:
rlkeeney wrote:I bought two sheets of 1/2 inch to cover my patio doors during a hurricane threat that didn't happen.

It was shown on "This old house", that plywood held up MUCH better than OSB. The 9lb. 2X4 shot at the window, bounced off the plywood and went through the OSB.

I want a gun that shoots 2x4's. :D
****************
****************

Mark

2017 Power Pro Mark 7
2002 50th anniversary model 520
and a few other woodworking tools.
User avatar
rlkeeney
Platinum Member
Posts: 784
Joined: Fri Nov 14, 2008 5:53 am
Location: Tallahassee FL
Contact:

Re: 1/2 Inch OSB Shelf

Post by rlkeeney »

dusty wrote:Cut off the water damaged portion and it is still good to go with a smaller lower storage area.

OSB purchased today may be a different story; especially if you buy it at a box store.
It dried up fine. I can barely tell it got wet. It's inside with the dehumidifiers now and in 24 hours....

That is a good point you make about the modern OSB.
User avatar
rlkeeney
Platinum Member
Posts: 784
Joined: Fri Nov 14, 2008 5:53 am
Location: Tallahassee FL
Contact:

Re: 1/2 Inch OSB Shelf

Post by rlkeeney »

beeg wrote:
rlkeeney wrote:I bought two sheets of 1/2 inch to cover my patio doors during a hurricane threat that didn't happen.

It was shown on "This old house", that plywood held up MUCH better than OSB. The 9lb. 2X4 shot at the window, bounced off the plywood and went through the OSB.
I hurricane country some time you can't get plywood so you take what you can get. In any case the primary concern for me was keeping water out and preventing the door from coming out. In that house 2x4s thrown that hard would have gone through the walls.
User avatar
rlkeeney
Platinum Member
Posts: 784
Joined: Fri Nov 14, 2008 5:53 am
Location: Tallahassee FL
Contact:

Re: 1/2 Inch OSB Shelf

Post by rlkeeney »

mbcabinetmaker wrote:
beeg wrote:
rlkeeney wrote:I bought two sheets of 1/2 inch to cover my patio doors during a hurricane threat that didn't happen.

It was shown on "This old house", that plywood held up MUCH better than OSB. The 9lb. 2X4 shot at the window, bounced off the plywood and went through the OSB.

I want a gun that shoots 2x4's. :D
I wonder if that would work better than buck shot for home defense. :D
User avatar
kablerj
Gold Member
Posts: 230
Joined: Sat Aug 23, 2014 3:33 pm
Location: Meyersdale PA

Re: 1/2 Inch OSB Shelf

Post by kablerj »

mbcabinetmaker wrote:
beeg wrote:
rlkeeney wrote:I bought two sheets of 1/2 inch to cover my patio doors during a hurricane threat that didn't happen.

It was shown on "This old house", that plywood held up MUCH better than OSB. The 9lb. 2X4 shot at the window, bounced off the plywood and went through the OSB.

I want a gun that shoots 2x4's. :D
Just download the plans for the Mini Marshmallow Crossbow and adjust to size :D
Hello from Somerset in the beautiful Pennsylvania Laurel Highlands.

Mark 7, Mark VII, Mark V 520, Mark V 510 x 2, Mark V 500
SPT's - Band Saw, Jig Saw, Belt Sander, Jointer, strip sander, Oscillating Sander, Speed Increaser
SS Freestanding - Pro Planer, Scroll Saw, Overarm Pin Router, Power Station, DC3000 x 2
Made for SS - Incra iBox, Ring Master

"Honest dear, I can quit any time I want."
Post Reply