10er motor
Moderator: admin
10er motor
I picked up a gem of a 10er and am going to do restoration this winter. My question I have is what 110 v motor would be a good replacement. I have a monster 220v one on it now. I want to make it as original looking as possible.
-
JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: 10er motor
There is no 'original'(it came without one). However an A O Smith 1/2 hp was optional.
IIWM, I would use the 'monster'. If you mean physical size, it would be 'age appropriate'.
IIWM, I would use the 'monster'. If you mean physical size, it would be 'age appropriate'.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Re: 10er motor
What is the HP rating and speed of the 220 volt
motor?
Like the other (vowel missing) poster, above, I agree.
Use the 220 volt motor, if it is good, and has enough power.
steve
motor?
Like the other (vowel missing) poster, above, I agree.
Use the 220 volt motor, if it is good, and has enough power.
steve
10 ER, stripped down.
Basic 10ER, Parts machine. Will be a semi-dedicated drill-press machine.
10 ER, a "survivor" of the trailer fire, in the back yard, needing restoration. Has a Mk5 headrest. Finally, stripped down.
Numerous parts, for Model 10 stuff. Except for lower saw guard, A and B adapters, I've got it.
Looking for one more, or some 9 inch extension table raisers.
Basic 10ER, Parts machine. Will be a semi-dedicated drill-press machine.
10 ER, a "survivor" of the trailer fire, in the back yard, needing restoration. Has a Mk5 headrest. Finally, stripped down.
Numerous parts, for Model 10 stuff. Except for lower saw guard, A and B adapters, I've got it.
Looking for one more, or some 9 inch extension table raisers.
Re: 10er motor
Congratulations on you new "gem".rbenstead wrote:I picked up a gem of a 10er and am going to do restoration this winter. My question I have is what 110 v motor would be a good replacement. I have a monster 220v one on it now. I want to make it as original looking as possible.
One of my 10ERs came with a big old GE 3/4 hp motor that can run on 220 of 110. 10ER 110/220 motor
Check the information plate on your motor, if it is dual voltage then changing it to run on 110 would not be difficult.
Also here is another thread that covered the motor spec's and some of the replacement options. 10 ER motor
Ron Dyck
==================================================================
10ER #23430, 10ER #84609, 10ER #94987,two SS A-34 jigsaws for 10ER.
1959 Mark 5 #356595 Greenie, SS Magna Jointer, SS planer, SS bandsaw, SS scroll saw (gray), DC3300,
==================================================================
10ER #23430, 10ER #84609, 10ER #94987,two SS A-34 jigsaws for 10ER.
1959 Mark 5 #356595 Greenie, SS Magna Jointer, SS planer, SS bandsaw, SS scroll saw (gray), DC3300,
Re: 10er motor
If you want a AO Smith 1/2 Hp motor and can put new bearings in them, contact me. I have a few free for the cost of shipping.
Re: 10er motor
hello e2512:
I saw your post re availability of used ER10 1/2 hp AO Smith motors in need of repair and a new home.
I am interested in your offer. Please let me know what you have and what it might cost me to have it shipped to Beaufort NC 28156.
you may contact me directly at dawolfe@ec.rr.com
Thanks very much.
I saw your post re availability of used ER10 1/2 hp AO Smith motors in need of repair and a new home.
I am interested in your offer. Please let me know what you have and what it might cost me to have it shipped to Beaufort NC 28156.
you may contact me directly at dawolfe@ec.rr.com
Thanks very much.
Re: 10er motor
NC, if he doesn't have any, look up an Ebay seller,
named HogWinslow.
steve
named HogWinslow.
steve
10 ER, stripped down.
Basic 10ER, Parts machine. Will be a semi-dedicated drill-press machine.
10 ER, a "survivor" of the trailer fire, in the back yard, needing restoration. Has a Mk5 headrest. Finally, stripped down.
Numerous parts, for Model 10 stuff. Except for lower saw guard, A and B adapters, I've got it.
Looking for one more, or some 9 inch extension table raisers.
Basic 10ER, Parts machine. Will be a semi-dedicated drill-press machine.
10 ER, a "survivor" of the trailer fire, in the back yard, needing restoration. Has a Mk5 headrest. Finally, stripped down.
Numerous parts, for Model 10 stuff. Except for lower saw guard, A and B adapters, I've got it.
Looking for one more, or some 9 inch extension table raisers.