I got it JPG

Moderator: admin

Post Reply
ERLover
Platinum Member
Posts: 3914
Joined: Mon Aug 31, 2015 10:19 pm
Location: Greenie and Goldie Country not to metion the WI Badgers!

I got it JPG

Post by ERLover »

Skip is doing a 6" HS pulley, you did the math, 4/6 reduction in speed, did not the nuns teach you in math/fractions? that is 2/3rds!!!! Based on that and the SC high end I have just around 900 rpm for high end speed, plenty enough for drilling, and at the low end for large Fostner Bits in the 200rpm+range :)
Thanks :D
KNOWLEDGE AND EXPERIENCE EQUALS WISDOM. Albert Einstein
The Greatness officially starts :D :D :D :D :D :D
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them. :)
Top
User avatar
JPG
Platinum Member
Posts: 35599
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Re: I got it JPG

Post by JPG »

ERLover wrote:Skip is doing a 6" HS pulley, you did the math, 4/6 reduction in speed, did not the nuns teach you in math/fractions? that is 2/3rds!!!! Based on that and the SC high end I have just around 900 rpm for high end speed, plenty enough for drilling, and at the low end for large Fostner Bits in the 200rpm+range :)
Thanks :D
By stating "4/6", I eliminated the need to explain from whence the fraction came from since we were dealing with 4" and 6" pulleys. :p

I guess 1066 is 'around' 900. ;)

Just got back from a very short trip to SW WI - hot/humid/ torrential rain. :eek:

Went to a buffet type function - I cannot believe I drove all the way to WI to attend and 'they' did not have butter available for mashed taters etc.. :rolleyes: At a 'country club' no less!
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Top
ERLover
Platinum Member
Posts: 3914
Joined: Mon Aug 31, 2015 10:19 pm
Location: Greenie and Goldie Country not to metion the WI Badgers!

Re: I got it JPG

Post by ERLover »

JPG wrote:
ERLover wrote:Skip is doing a 6" HS pulley, you did the math, 4/6 reduction in speed, did not the nuns teach you in math/fractions? that is 2/3rds!!!! Based on that and the SC high end I have just around 900 rpm for high end speed, plenty enough for drilling, and at the low end for large Fostner Bits in the 200rpm+range :)
Thanks :D
By stating "4/6", I eliminated the need to explain from whence the fraction came from since we were dealing with 4" and 6" pulleys. :p

I guess 1066 is 'around' 900. ;)

Just got back from a very short trip to SW WI - hot/humid/ torrential rain. :eek:

Went to a buffet type function - I cannot believe I drove all the way to WI to attend and 'they' did not have butter available for mashed taters etc.. :rolleyes: At a 'country club' no less!
OMG in my home territory/moms to meet you that night!!!! I am in Appleton as of Friday PM, WI, my loss, rains must have been real localized, cause at her place as I said on another it just huffed and blew, cracked and flashed and not much rain at all, out grilling during it, did not get wet.
No freaken Butter, come on, did you ask for some? Where were you? Give me the details?
KNOWLEDGE AND EXPERIENCE EQUALS WISDOM. Albert Einstein
The Greatness officially starts :D :D :D :D :D :D
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them. :)
Top
User avatar
JPG
Platinum Member
Posts: 35599
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Re: I got it JPG

Post by JPG »

ERLover wrote:
JPG wrote:
ERLover wrote:Skip is doing a 6" HS pulley, you did the math, 4/6 reduction in speed, did not the nuns teach you in math/fractions? that is 2/3rds!!!! Based on that and the SC high end I have just around 900 rpm for high end speed, plenty enough for drilling, and at the low end for large Fostner Bits in the 200rpm+range :)
Thanks :D
By stating "4/6", I eliminated the need to explain from whence the fraction came from since we were dealing with 4" and 6" pulleys. :p

I guess 1066 is 'around' 900. ;)

Just got back from a very short trip to SW WI - hot/humid/ torrential rain. :eek:

Went to a buffet type function - I cannot believe I drove all the way to WI to attend and 'they' did not have butter available for mashed taters etc.. :rolleyes: At a 'country club' no less!
OMG in my home territory/moms to meet you that night!!!! I am in Appleton as of Friday PM, WI, my loss, rains must have been real localized, cause at her place as I said on another it just huffed and blew, cracked and flashed and not much rain at all, out grilling during it, did not get wet.
No freaken Butter, come on, did you ask for some? Where were you? Give me the details?
Lafayette County

"Hicksville" :D That is not a slur!!!!

Corn Soybeans and Cows. Oh and some hogs thrown in for good measure.

60th high school reunion. Very short trip. Day up, Day there, Day back.
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Top
ERLover
Platinum Member
Posts: 3914
Joined: Mon Aug 31, 2015 10:19 pm
Location: Greenie and Goldie Country not to metion the WI Badgers!

Re: I got it JPG

Post by ERLover »

JPG wrote:
ERLover wrote:Skip is doing a 6" HS pulley, you did the math, 4/6 reduction in speed, did not the nuns teach you in math/fractions? that is 2/3rds!!!! Based on that and the SC high end I have just around 900 rpm for high end speed, plenty enough for drilling, and at the low end for large Fostner Bits in the 200rpm+range :)
Thanks :D
By stating "4/6", I eliminated the need to explain from whence the fraction came from since we were dealing with 4" and 6" pulleys. :p

I guess 1066 is 'around' 900. ;)

Just got back from a very short trip to SW WI - hot/humid/ torrential rain. :eek:

Went to a buffet type function - I cannot believe I drove all the way to WI to attend and 'they' did not have butter available for mashed taters etc.. :rolleyes: At a 'country club' no less!
JPG, you were in my back yard and no/PM, mom has butter on everything, I would have delivered it. man I am disappointed we did not hook up :mad:
KNOWLEDGE AND EXPERIENCE EQUALS WISDOM. Albert Einstein
The Greatness officially starts :D :D :D :D :D :D
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them. :)
Top
User avatar
JPG
Platinum Member
Posts: 35599
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Re: I got it JPG

Post by JPG »

No WiFi etc. :mad:
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Top
ERLover
Platinum Member
Posts: 3914
Joined: Mon Aug 31, 2015 10:19 pm
Location: Greenie and Goldie Country not to metion the WI Badgers!

Re: I got it JPG

Post by ERLover »

JPG, just messing with ya on the fractions :cool: What High School?
KNOWLEDGE AND EXPERIENCE EQUALS WISDOM. Albert Einstein
The Greatness officially starts :D :D :D :D :D :D
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them. :)
Top
User avatar
JPG
Platinum Member
Posts: 35599
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Re: I got it JPG

Post by JPG »

ERLover wrote:JPG, just messing with ya on the fractions :cool: What High School?

DHS You be a bright lad, sufficient info has now been given. :D
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Top
ERLover
Platinum Member
Posts: 3914
Joined: Mon Aug 31, 2015 10:19 pm
Location: Greenie and Goldie Country not to metion the WI Badgers!

Re: I got it JPG

Post by ERLover »

JPG wrote:
ERLover wrote:JPG, just messing with ya on the fractions :cool: What High School?

DHS You be a bright lad, sufficient info has now been given. :D
Dominican High School??
KNOWLEDGE AND EXPERIENCE EQUALS WISDOM. Albert Einstein
The Greatness officially starts :D :D :D :D :D :D
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them. :)
Top
ERLover
Platinum Member
Posts: 3914
Joined: Mon Aug 31, 2015 10:19 pm
Location: Greenie and Goldie Country not to metion the WI Badgers!

Re: I got it JPG

Post by ERLover »

@ JPG> DHS as I know it now and for the past 20ish years is an all female school, BUT i am a few years younger then you, it may have been coed then.
If the right school, we are talking about, and your age you had some Nuns rapping your knuckles!!!! :eek:
Where was the reunion?
I just got a notice for my 8th grade one from Mother of Perpetual Help on 55th and Villard, Milwaukee,WI, for next year.
KNOWLEDGE AND EXPERIENCE EQUALS WISDOM. Albert Einstein
The Greatness officially starts :D :D :D :D :D :D
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them. :)
Top
Post Reply

Return to “Community”