Page 1 of 3
Shopsmith Table Storage System
Posted: Fri Sep 09, 2016 5:40 pm
by jjbuzard
I ordered the Shopsmith Table Storage System because I wanted an easy way to store the tables, etc. when not in use, I did so on faith, because there isn't a lot of pictures and information on how to use the system. After it arrived I thought that is a lot of money for what you get, but I figured as it is American made, I am willing to pay a little more. Even so it is a bit over priced. My original plan was to use the one last un-used space, the inside of the garage door. Here are the modifications and set up, it works great. To attach the system to the door, I used heavy duty perforated strap, screwed to the door frame.
The flippers to retain the tube automatically swing down into position if you forget to turn them over the tubes, as soon as the door starts up, their own weight swings them into place
- Drilling Bracket for retainer flipper
- Modif Brkt.jpg (868.71 KiB) Viewed 5570 times
- Drilling Flipper to retain the tube holding the tables.
- retainer.jpg (655.17 KiB) Viewed 5570 times
- Brackets to hold extra tubes.
- tube retrainers.jpg (548.01 KiB) Viewed 5570 times
- Bracket installed
- installed.jpg (561.46 KiB) Viewed 5570 times
- The flipper is out of the way in this picture to allow the tube to be removed.
- out of thge way.jpg (660.18 KiB) Viewed 5570 times
- I had to add spacers so that the Tube Retainers would clear the door as it opens.
- spacer.jpg (590.61 KiB) Viewed 5570 times
- Completed, attached and ready for use. Dead space utilized.
- installed complete.jpg (905.85 KiB) Viewed 5570 times
- With the door open I can walk under the tables hanging from the Bracket
- door open.jpg (1.15 MiB) Viewed 5570 times
Re: Shopsmith Table Storage System
Posted: Fri Sep 09, 2016 6:15 pm
by ERLover
JJ, Very nice and clever. To walk under that, it has to be one high door or one short JJ
Re: Shopsmith Table Storage System
Posted: Fri Sep 09, 2016 6:16 pm
by jjbuzard
ERLover wrote:JJ, Very nice and clever. To walk under that, it has to be one high door or one short JJ
It is a high door, if it had been a standard door I would have gone up one panel.
Re: Shopsmith Table Storage System
Posted: Fri Sep 09, 2016 6:30 pm
by ERLover
jjbuzard wrote:ERLover wrote:JJ, Very nice and clever. To walk under that, it has to be one high door or one short JJ
It is a high door, if it had been a standard door I would have gone up one panel.
How would that have helped, Unless over something you cant walk?
Re: Shopsmith Table Storage System
Posted: Fri Sep 09, 2016 6:51 pm
by Curly
That's very clever Mr. JJ
Re: Shopsmith Table Storage System
Posted: Fri Sep 09, 2016 6:53 pm
by ChrisNeilan
ERLover wrote:jjbuzard wrote:ERLover wrote:JJ, Very nice and clever. To walk under that, it has to be one high door or one short JJ
It is a high door, if it had been a standard door I would have gone up one panel.
How would that have helped, Unless over something you cant walk?
uh huh? ER, I believe you may have a point there!
Re: Shopsmith Table Storage System
Posted: Fri Sep 09, 2016 7:40 pm
by jjbuzard
Right.But as it is, it goes up over where my Shopsmith sits, so it really doesn't matter and hangs directly where it sits and if it goes up, it usually comes right back down as the shop is heated and air conditioned.So it just making that dead "wall space"
useful.
Re: Shopsmith Table Storage System
Posted: Fri Sep 09, 2016 7:50 pm
by ERLover
jjbuzard wrote:Right.But as it is, it goes up over where my Shopsmith sits, so it really doesn't matter and hangs directly where it sits and if it goes up, it usually comes right back down as the shop is heated and air conditioned.So it just making that dead "wall space"
useful.
Got it.
Nice to have a heated shop. Even nicer to have it ACed!!!!!!
Re: Shopsmith Table Storage System
Posted: Fri Sep 09, 2016 8:39 pm
by jjbuzard
ERLover wrote:jjbuzard wrote:Right.But as it is, it goes up over where my Shopsmith sits, so it really doesn't matter and hangs directly where it sits and if it goes up, it usually comes right back down as the shop is heated and air conditioned.So it just making that dead "wall space"
useful.
Got it.
Nice to have a heated shop. Even nicer to have it ACed!!!!!!
Yeah as I get older I can't take the heat and I like to work in my shop all year round.
Re: Shopsmith Table Storage System
Posted: Sat Sep 10, 2016 12:01 am
by ERLover
jjbuzard wrote:ERLover wrote:jjbuzard wrote:Right.But as it is, it goes up over where my Shopsmith sits, so it really doesn't matter and hangs directly where it sits and if it goes up, it usually comes right back down as the shop is heated and air conditioned.So it just making that dead "wall space"
useful.
Got it.
Nice to have a heated shop. Even nicer to have it ACed!!!!!!
Yeah as I get older I can't take the heat and I like to work in my shop all year round.
I feel ya, on the heat.