Thanx.
Looking for a Planer # 505990
Moderator: admin
Looking for a Planer # 505990
Anyone know where I might find a Planer for my 510? Would like to get hold of one that doesn't cause me to donate my left leg. 
Thanx.
Thanx.
1995 Shopsmith 510 (bought new), and 510 mounted SS Router,SS Jointer,SS Bandsaw,Sander,Vacuum System, Delta Jig Saw(bench top)and many other tools in which to hurt myself.
-
ERLover
- Platinum Member
- Posts: 3914
- Joined: Mon Aug 31, 2015 10:19 pm
- Location: Greenie and Goldie Country not to metion the WI Badgers!
Re: Looking for a Planer # 505990
Watch Craigs List, hard to find in my area.
Selling here openly is frowned abound by the M S, AKA the Mother Ship, AKA Shop Smith who sponsors this Forum Site.
There was someone with more Planers then they needed check the different Forums and PM them.
I did your work for you.
http://shopsmith.com/ss_forum/woodworki ... 19115.html
Selling here openly is frowned abound by the M S, AKA the Mother Ship, AKA Shop Smith who sponsors this Forum Site.
There was someone with more Planers then they needed check the different Forums and PM them.
I did your work for you.
http://shopsmith.com/ss_forum/woodworki ... 19115.html
KNOWLEDGE AND EXPERIENCE EQUALS WISDOM. Albert Einstein
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
Re: Looking for a Planer # 505990
Okay... I don't know what work you're talking about. I've been checking pretty much all Craigslists and Fleabay. I should have bought one 22 years ago when I bought my 510 new, but opted for a jointer, a bandsaw, drum sander, table extensions, and lots of other extras instead. Oh well...
1995 Shopsmith 510 (bought new), and 510 mounted SS Router,SS Jointer,SS Bandsaw,Sander,Vacuum System, Delta Jig Saw(bench top)and many other tools in which to hurt myself.
-
br549
- Platinum Member
- Posts: 657
- Joined: Sun Nov 30, 2014 8:51 am
- Location: Midway between Houston/Galveston, TX
Re: Looking for a Planer # 505990
Just be patient, or expand your search zone. I got lucky and found a 12" planer locally on Craigslist for $100. I found a DC3300 in the San Diego area for $75, and was able to get a nephew who lives near there buy it for me and ship. Tap into any good friends or relatives in larger market areas and it shouldn't take long to find whatever you're looking for. Also, if you add your location to your profile, maybe other members can alert you if they see something. And check the Heads Up Bargain thread in the Community section where other members provide links to good finds.
P.S. I think what ER Lover meant by doing the work for you was that he provided a link to a recent thread where at least 2 members talk about maybe not having a need for their Mark V mounted planer. You might PM them.
P.S. I think what ER Lover meant by doing the work for you was that he provided a link to a recent thread where at least 2 members talk about maybe not having a need for their Mark V mounted planer. You might PM them.
-
ERLover
- Platinum Member
- Posts: 3914
- Joined: Mon Aug 31, 2015 10:19 pm
- Location: Greenie and Goldie Country not to metion the WI Badgers!
Re: Looking for a Planer # 505990
That is why I posted this. Did you open and read it? One for sale right here maybe.
woodworking-tool-review-f9/pro-planer-t19115.html
woodworking-tool-review-f9/pro-planer-t19115.html
KNOWLEDGE AND EXPERIENCE EQUALS WISDOM. Albert Einstein
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
Re: Looking for a Planer # 505990
You don't mention what part of the country you live in. Location determines what you can expect to pay. Around here, there are no cheap Shopsmiths, accessories, or parts. Other parts of the country have a glut of them so they sell cheap.
-
br549
- Platinum Member
- Posts: 657
- Joined: Sun Nov 30, 2014 8:51 am
- Location: Midway between Houston/Galveston, TX
Re: Looking for a Planer # 505990
In case you are near, or know someone in Boston. First one is NOS. Second one is used, and includes a Mark V too!
http://boston.craigslist.org/gbs/tls/5877929121.html
http://newlondon.craigslist.org/tls/5824195161.html
Or near Denver:
http://fortcollins.craigslist.org/tls/5882789108.html
http://boston.craigslist.org/gbs/tls/5877929121.html
http://newlondon.craigslist.org/tls/5824195161.html
Or near Denver:
http://fortcollins.craigslist.org/tls/5882789108.html
Re: Looking for a Planer # 505990
So... was out of the loop for a few days... hunting season and all so I have been somewhat distracted. Maybe should have started this thread (skirmish) later down the road. Too many Elk and Deer.... so little clear shots and time. 3 rules of hunting: (1) Sight (2) Horns (3) Shoot
Sorry and apology ERLover, but I'm still learning how to fly this duck. This is not the easiest website to navigate. I FINALLY figured out how to post my info on the profile. Basically although I'm not totally illiterate on computers, there's still times I need the aid of a seeing eye dog.
Henceforth (wink...wink) ERLover I din't pick up on the links. Sorry...
But still appreciate the input.
Thanks br549 for the links. Every one of them will be greatly appreciated.
Any leads needed... I'll pay for shipping costs. Thanx.
Sorry and apology ERLover, but I'm still learning how to fly this duck. This is not the easiest website to navigate. I FINALLY figured out how to post my info on the profile. Basically although I'm not totally illiterate on computers, there's still times I need the aid of a seeing eye dog.
Henceforth (wink...wink) ERLover I din't pick up on the links. Sorry...
But still appreciate the input.
Thanks br549 for the links. Every one of them will be greatly appreciated.
Any leads needed... I'll pay for shipping costs. Thanx.
1995 Shopsmith 510 (bought new), and 510 mounted SS Router,SS Jointer,SS Bandsaw,Sander,Vacuum System, Delta Jig Saw(bench top)and many other tools in which to hurt myself.
-
ERLover
- Platinum Member
- Posts: 3914
- Joined: Mon Aug 31, 2015 10:19 pm
- Location: Greenie and Goldie Country not to metion the WI Badgers!
Re: Looking for a Planer # 505990
sjackpine wrote:So... was out of the loop for a few days... hunting season and all so I have been somewhat distracted. Maybe should have started this thread (skirmish) later down the road. Too many Elk and Deer.... so little clear shots and time. 3 rules of hunting: (1) Sight (2) Horns (3) Shoot
Sorry and apology ERLover, but I'm still learning how to fly this duck. This is not the easiest website to navigate. I FINALLY figured out how to post my info on the profile. Basically although I'm not totally illiterate on computers, there's still times I need the aid of a seeing eye dog.
Henceforth (wink...wink) ERLover I din't pick up on the links. Sorry...
But still appreciate the input.
Thanks br549 for the links. Every one of them will be greatly appreciated.
I hope you had good shooting!!!
Ya me too, if you have a problem navigating just ask, many here to help, JPG does use a bit different lingo, knows almost all, a great asset here, but you have to learn how to interpret him. He spent too many years in the SE Hills. JPG
KNOWLEDGE AND EXPERIENCE EQUALS WISDOM. Albert Einstein
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
- JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Looking for a Planer # 505990
Maybe! He spent his 'formative' years(grade school) in the dairyland. 
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange