This took over a month to complete, the next one will be much quicker a I have learned a great deal!
SOLD!
Finished segmented vase!
Moderator: admin
-
ChrisNeilan
- Platinum Member
- Posts: 1463
- Joined: Sun Oct 27, 2013 5:30 pm
- Location: Waterford, Connecticut
- Contact:
Finished segmented vase!
At long last it is finished! 481 pieces, all cut out on the shopsmith using a wedgie sled. Rings glued up with a gluing jig and rubber bands! Two coats of Danish oil. 9" tall, 9 2/4 diameter at top, 4: at the bottom.
This took over a month to complete, the next one will be much quicker a I have learned a great deal!
SOLD!
This took over a month to complete, the next one will be much quicker a I have learned a great deal!
SOLD!
- Attachments
-
- Segmented vase outside.jpg (113.49 KiB) Viewed 9283 times
-
- Segmented vasre inside.jpg (262.6 KiB) Viewed 9283 times
Chris Neilan
Shopsmith Mark 7, Shopsmith Mark V 1982, shortened, Shopsmith 10 ER; Craftsman table saw (1964); Powermatic 3520B lathe
Shopsmith Mark 7, Shopsmith Mark V 1982, shortened, Shopsmith 10 ER; Craftsman table saw (1964); Powermatic 3520B lathe
Re: Finished segmented vase!
Wonderful! Makes me want to try one of these!
Gale's Law: The bigger the woodworking project, the less the mistakes show in any photo taken far enough away to show the entire project!
-
BuckeyeDennis
- Platinum Member
- Posts: 3815
- Joined: Tue Jul 24, 2012 10:03 pm
- Location: Central Ohio
Re: Finished segmented vase!
Did you really, actually, sell that beauty?ChrisNeilan wrote:At long last it is finished! 481 pieces, all cut out on the shopsmith using a wedgie sled. Rings glued up with a gluing jig and rubber bands! Two coats of Danish oil. 9" tall, 9 2/4 diameter at top, 4: at the bottom.
This took over a month to complete, the next one will be much quicker a I have learned a great deal!
SOLD!
Re: Finished segmented vase!
Thanks for showing us the final results, it looks great!
Ed
Ed
{Knight of the Shopsmith} [Hero's don't wear capes, they wear dog tags]
-
ERLover
- Platinum Member
- Posts: 3914
- Joined: Mon Aug 31, 2015 10:19 pm
- Location: Greenie and Goldie Country not to metion the WI Badgers!
Re: Finished segmented vase!
Exquisite, So now sold, for how much? I would think 2-3$ hundreds.ChrisNeilan wrote:At long last it is finished! 481 pieces, all cut out on the shopsmith using a wedgie sled. Rings glued up with a gluing jig and rubber bands! Two coats of Danish oil. 9" tall, 9 2/4 diameter at top, 4: at the bottom.
This took over a month to complete, the next one will be much quicker a I have learned a great deal!
SOLD!
KNOWLEDGE AND EXPERIENCE EQUALS WISDOM. Albert Einstein
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
-
masonsailor2
- Platinum Member
- Posts: 1564
- Joined: Wed Feb 05, 2014 11:57 am
- Location: Las Vegas NV
Re: Finished segmented vase!
Very nice Chris ! Beautiful work
Paul
Paul
Re: Finished segmented vase!
Very nice Chris
Joe
520, Bandsaw, Beltsander, Delta Drill Press, Delta Lathe, Craftsman Planner/Jointer, Delta Planner, Mini "Greenie" Shorty 500
Being a VETERAN is an honor
Being a GRANDPA is priceless
520, Bandsaw, Beltsander, Delta Drill Press, Delta Lathe, Craftsman Planner/Jointer, Delta Planner, Mini "Greenie" Shorty 500
Being a VETERAN is an honor
Being a GRANDPA is priceless
-
ChrisNeilan
- Platinum Member
- Posts: 1463
- Joined: Sun Oct 27, 2013 5:30 pm
- Location: Waterford, Connecticut
- Contact:
Re: Finished segmented vase!
This went to a friend who is also my pension guy. Since it was only my third segmented piece, and he is a friend and a great pension guy ( really great), i am only accepting $125. Basically covered my costs and allows my to get more wood! When i retire, the price will go up!ERLover wrote:Exquisite, So now sold, for how much? I would think 2-3$ hundreds.ChrisNeilan wrote:At long last it is finished! 481 pieces, all cut out on the shopsmith using a wedgie sled. Rings glued up with a gluing jig and rubber bands! Two coats of Danish oil. 9" tall, 9 2/4 diameter at top, 4: at the bottom.
This took over a month to complete, the next one will be much quicker a I have learned a great deal!
SOLD!
Chris Neilan
Shopsmith Mark 7, Shopsmith Mark V 1982, shortened, Shopsmith 10 ER; Craftsman table saw (1964); Powermatic 3520B lathe
Shopsmith Mark 7, Shopsmith Mark V 1982, shortened, Shopsmith 10 ER; Craftsman table saw (1964); Powermatic 3520B lathe
-
newportcycle
- Gold Member
- Posts: 191
- Joined: Sat May 05, 2012 5:43 am
- Location: Pittsfield, Maine
Re: Finished segmented vase!
Brilliant, very nice work.