Gallery Bowls

[masonsailor2]

This thread is a gallery for pictures and brief descriptions of the bowls turned by members of the forum. Please keep the description brief. Type of wood and equipment used !

[masonsailor2]

Mortar and pestle made from mahogany and paduak. SS Power Pro with the universal tool rest and SS turning chisels.

[Dansmith]

Very nice. I always like paduak in a turning.

[Dansmith]

Here's a few I have turned recently with some maple from a neighbor's tree that was felled about 3 months ago. Nothing better than turning free wood.
Most were done on a Harbor Freight Lathe.

[wa2crk]

Here is one that I did some time ago with a single segmented ring. Then I had to make a set of four more for a friend
Main body is some kind of mahogany possibly luan with a ring of purple heart and yellowheart.

bowl with ring one.jpg (70.29 KiB) Viewed 4125 times

Bill V
Tools used were the SS 520 with PP headstock and some work on the Delta 46-460 and finish applied on the SS with a speed reducer to bring the RPM down to about 35 RPM.
OK so I dug another one made with Ambrosia maple with an offset turned highlight in the bottom

bowl interior.jpg (98.7 KiB) Viewed 4120 times

bowl bottom with insert.jpg (92.56 KiB) Viewed 4120 times