Page 1 of 2
Pin Chuck
Posted: Tue Jul 15, 2008 8:50 pm
by easterngray
I have recently learned about pin chucks - boy they are a great,simple tool. Any ideas as to where I might get a pin chuck made for my Mark V? Thanks - Alec
Posted: Tue Jul 15, 2008 9:08 pm
by a1gutterman
Posted: Tue Jul 15, 2008 9:27 pm
by RobertTaylor
if you are refering to a pin chuck for pen turning i made my own will get more info for you if that is the type you want. it is completely different than what tim is showing.
Pin Chuck
Posted: Wed Jul 16, 2008 4:59 am
by easterngray
Sorry for the confusion - BettyT is referencing the sort of pin chuck I mean Tim - take a look at this video of a fellow that turns duck calls - he explains the pin chuck that I am speaking about. BettyT anyhelp you can give would be appreciated! Thanks - Alec
http://youtube.com/watch?v=Odu1cT3AwUE&feature=related
Posted: Wed Jul 16, 2008 7:57 am
by RobertTaylor
at
http://www.penturners.org There is a tutorial on the front page about making an O-ring pin chuck.
http://www.redriverpens.com/pdf%20files ... rt%201.pdf scroll down til you find making closed end pens.
hope this is useful, bob
Posted: Wed Jul 16, 2008 8:07 am
by gregf
Pin chucks are a new one on me too.
If you find a chuck with a 1" x 8tpi spindle, Penn State Industries makes an adapter to fit SS.
http://www.pennstateind.com/store/L5818.html
BettyT, thanks for the info, may be time to fire up the metal lathe to make one.
Posted: Wed Jul 16, 2008 10:20 am
by RobertTaylor
i used a 1/4" bolt about 5" long. i cut off the head and the threads then also cut the head off a 1 1/4" finishing nail for the pin. i then carefully filed a flat on the bolt about 1/4" from one end measuring carefully with a dial caliper to keep it flat until i got the same diameter of the original bolt with the pin and bolt together (.247) if i remember. imho the whole project only took about 15 minutes though and works quite well, bob
the o-ring type appears to be more forgiving therefore quicker and easier.
greg, thanks for the tip on the penn state adapter. i do indeed use that adapter with my nova midi chuck as nova only sells a shopsmith adapter for their bigger chucks.
Posted: Thu Jul 17, 2008 4:58 am
by easterngray
That's great guys - thanks. Alec
Posted: Thu Jul 17, 2008 3:37 pm
by woodburner
Not sure which type of pin chuck you are referring to. The two I use are as follows:
There is what some call a "pin chuck" which is also known as a pin vise. You use this to hold very small drill bits for boring very small holes in wood/metal and plastic. I use this all the time in my model railroad building.
There is also a pin chuck known as a "key chuck". You use this mostly on lathes to hold small work projects. This uses a "pin" or "key" that is used in between the material and a flat on the chuck. You bore a hole in the material, slide it onto the chuck, and then wedge the "pin/key" in between the material and the chuck by giving it a twist, locking it into place. By the sound of your question, I think this is the one you are referring to.
Got anymore questions, be sure to ask.
Posted: Thu Jul 17, 2008 7:56 pm
by jbooher
