Okay I am a guy on a budget. I need to find part number 514416 for a shopsmith 510 that I just got for really cheap. The part is the tool rest post.
She does run but I don't have all the lathe parts. I love shopsmith but the part costs $79.17 from shopsmith.
Anyone got one the are willing to part with?
NEED PARTS PLEASE
Moderator: admin
-
chapmanruss
- Platinum Member
- Posts: 4545
- Joined: Tue Aug 26, 2014 8:16 pm
- Location: near Portland, Oregon
Re: NEED PARTS PLEASE
Hi and welcome to the forum. Since no one has responded yet I am guessing none of our regulars like me have an extra post. All is not lost though, you could check for parts at on-line auction sites and maybe get one cheaper than buying a new one. The post is not a common missing part so finding just the post may be difficult. Good Luck
Russ
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's, 2 Power Stations & Crafter's Station
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored.
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's, 2 Power Stations & Crafter's Station
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored.
-
JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: NEED PARTS PLEASE
Although just the post is rarely on E-Bay, an entire assembly is and will contain the post. Any version post will work(except Mark 2/ 10E/ER).
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
-
dusty
- Platinum Member
- Posts: 21530
- Joined: Wed Nov 22, 2006 6:52 am
- Location: Tucson (Wildcat Country), Arizona
Re: NEED PARTS PLEASE
If there is someone who has done a double tilt upgrade, they ended up with two unused posts. Not the same post by any means but MIGHT one of those work?
"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.
Dusty
Sent from my Dell XPS using Firefox.
-
chapmanruss
- Platinum Member
- Posts: 4545
- Joined: Tue Aug 26, 2014 8:16 pm
- Location: near Portland, Oregon
Re: NEED PARTS PLEASE
Dusty,
I thought of that looking at my old posts. Although it would not have all the machining the original post has the post could be cut shorter to match the height of the lathe post. It would not have the groove where the set screw goes so after a while you would have a lot of raised set screw cup marks making it harder to turn the arm on the post. Someone with a metal lathe could cut that groove in. If you are using the lever handle locks, they have a flat end and should be okay without the groove. There is a 510 post and 2 position arm, no tool rest, for sale on ebay for $32.95 + shipping from a seller I have dealt with and trust.
I thought of that looking at my old posts. Although it would not have all the machining the original post has the post could be cut shorter to match the height of the lathe post. It would not have the groove where the set screw goes so after a while you would have a lot of raised set screw cup marks making it harder to turn the arm on the post. Someone with a metal lathe could cut that groove in. If you are using the lever handle locks, they have a flat end and should be okay without the groove. There is a 510 post and 2 position arm, no tool rest, for sale on ebay for $32.95 + shipping from a seller I have dealt with and trust.
Russ
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's, 2 Power Stations & Crafter's Station
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored.
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's, 2 Power Stations & Crafter's Station
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored.
-
highpockets1658
- Silver Member
- Posts: 17
- Joined: Mon Oct 08, 2018 11:02 pm
Re: NEED PARTS PLEASE
I had the same problem. Seems a lot of money for the part. I bought a whole tool rest off Ebay. Now i have xtra parts.