Really neat fence addition

This is a forum for intermediate to advanced woodworkers. Show off your projects or share your ideas.

Moderator: admin

Post Reply
User avatar
Ed in Tampa
Platinum Member
Posts: 5834
Joined: Fri Jul 21, 2006 12:45 am
Location: North Tampa Bay area Florida

Really neat fence addition

Post by Ed in Tampa »

I just was sent a video from Fine Woodworking showing a Aux fence some guy built.
I seems like a perfect addition to the Shopsmith fence. Especially for cutting bevels. The video shows cutting bevels on a normal saw but I can see it being very useful for cutting bevels on the Shopsmith.
https://www.finewoodworking.com/2014/07 ... =593799373
Top
User avatar
jsburger
Platinum Member
Posts: 6585
Joined: Fri Jul 21, 2006 4:06 pm
Location: Hooper, UT

Re: Really neat fence addition

Post by jsburger »

I built that same fence a few years ago when it appeared in Fine Woodworking. I built it for my Powermatic table saw. It could be very easily adapted th any SS fence. It would be particularly useful on SS fences that don't have T tracks or the 510 fence that only has the T track on the top.
Attachments
20190126_103151.jpg
20190126_103151.jpg (291.67 KiB) Viewed 13081 times
John & Mary Burger
Eagle's Lair Woodshop
Hooper, UT
Top
User avatar
algale
Platinum Member
Posts: 4841
Joined: Thu Nov 04, 2010 8:13 am

Re: Really neat fence addition

Post by algale »

John, it's hard to like you when your jigs always look better than my projects!
Gale's Law: The bigger the woodworking project, the less the mistakes show in any photo taken far enough away to show the entire project!

Top
User avatar
jsburger
Platinum Member
Posts: 6585
Joined: Fri Jul 21, 2006 4:06 pm
Location: Hooper, UT

Re: Really neat fence addition

Post by jsburger »

algale wrote:John, it's hard to like you when your jigs always look better than my projects!
Aw comon Al, that jig hardly compares to the slow boat. :eek: :) :)
John & Mary Burger
Eagle's Lair Woodshop
Hooper, UT
Top
User avatar
chapmanruss
Platinum Member
Posts: 4555
Joined: Tue Aug 26, 2014 8:16 pm
Location: near Portland, Oregon

Re: Really neat fence addition

Post by chapmanruss »

John,

I have to agree with Al. That jig is a very fine piece of work. True craftsmanship :)
Russ

Mark V completely upgraded to Mark 7
Mark V 520
All SPT's, 2 Power Stations & Crafter's Station
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored.
Top
Post Reply

Return to “General Woodworking”