Page 1 of 2

Cradle plans

Posted: Sat Mar 16, 2019 8:18 pm
by Backatlast
I’m looking for an heirloom cradle plan that was in hands on in 1985-1987. I built one of those cradlesway back then. I can’t seem to find the plan any longer. Any suggestions.

Re: Cradle plans

Posted: Sun Mar 17, 2019 12:53 pm
by br549
Is this it? If resolution is too low, PM me with your email address and I can send higher resolution version.

Re: Cradle plans

Posted: Sun Mar 17, 2019 3:21 pm
by Ed in Tampa
Woodsmith did a similar plan, the only difference was the sides were rails instead of solid wood.
I built one for my first grandchild and to date it held 7 grandchildren and 4 great children.

Best thing about it was the ability to take it apart tonstore between uses.

Re: Cradle plans

Posted: Sun Mar 17, 2019 6:22 pm
by Backatlast
That’s not the one. The one I built was a rocking cradle with a hood on it. Pinterest shows the cradle but it won’t link me to the plans. Thank you.

Re: Cradle plans

Posted: Sun Mar 17, 2019 6:23 pm
by Backatlast
It would be in an issue a couple of years later.

Re: Cradle plans

Posted: Sun Mar 17, 2019 8:04 pm
by rpd
Backatlast wrote:It would be in an issue a couple of years later.
Sounds like this one. http://www.shopsmithhandson.com/archive ... /index.htm

Re: Cradle plans

Posted: Sun Mar 17, 2019 8:30 pm
by JPG
rpd wrote:
Backatlast wrote:It would be in an issue a couple of years later.
Sounds like this one. http://www.shopsmithhandson.com/archive ... /index.htm
link will not work for me???

Re: Cradle plans

Posted: Sun Mar 17, 2019 11:20 pm
by Mike907
Link works fine for me on a Mac using Safari.

Mike

Re: Cradle plans

Posted: Mon Mar 18, 2019 1:06 am
by rpd
JPG wrote:
rpd wrote:
Backatlast wrote:It would be in an issue a couple of years later.
Sounds like this one. http://www.shopsmithhandson.com/archive ... /index.htm
link will not work for me???
Now isn't that strange, it isn't working for me any more either, :confused: and I can't get there from the Shopsmith site menus either, They seem to have done work on the web page and broke the link.

The good news is that it does work from the Way Back Machine. :cool:

https://web.archive.org/web/20160915111 ... /index.htm

Image

Re: Cradle plans

Posted: Mon Mar 18, 2019 8:45 am
by rpd
JPG wrote:
rpd wrote:
Backatlast wrote:It would be in an issue a couple of years later.
Sounds like this one. http://www.shopsmithhandson.com/archive ... /index.htm
link will not work for me???
Stranger and stranger. Today the original link is working again.