Hi a quick first question.
Can 500 saw arbors be used on a 510 ?
Thanks, Randy
500 Saw arbors
Moderator: admin
-
chapmanruss
- Platinum Member
- Posts: 4544
- Joined: Tue Aug 26, 2014 8:16 pm
- Location: near Portland, Oregon
Re: 500 Saw arbors
That depends on which arbor. The 510, 505, 520 and Mark 7 use longer arbors due to the design of the lower Saw Blade Guard. The 1-1/4" and 5/8" saw blade arbors need to be the longer ones made for it. The Sanding Disk needs to be the longer arbor one if being used with the lower Saw Blade Guard for dust collection. Universal arbors like P/N 505506 the Molder/ Dado arbor is used on all models of the Mark V. That's the short version of the answer. If you need more just ask.
Russ
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's, 2 Power Stations & Crafter's Station
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored.
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's, 2 Power Stations & Crafter's Station
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored.
-
JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: 500 Saw arbors
Quick short answer yes.
Longer answer - But the quill must be extended so the blade aligns with the slot. As long as the arbor does not then interfere with the trunion etc. . . . BUT if using a saw guard, the answer changes since an additional candidate for interference becomes relevant.
Longer answer - But the quill must be extended so the blade aligns with the slot. As long as the arbor does not then interfere with the trunion etc. . . . BUT if using a saw guard, the answer changes since an additional candidate for interference becomes relevant.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange