Page 1 of 1
Belt guard attaching bolt
Posted: Tue Sep 29, 2020 4:54 pm
by Fireballxl5
Need an attaching bolt for my belt guard. Anyone know what size bolt it is. The owners manual doesn't give the size.
Thanks
Re: Belt guard attaching bolt
Posted: Wed Sep 30, 2020 2:07 pm
by chapmanruss
Two different bolts have been used for attaching the Upper Belt Guard to the Headstock. The early one was a standard hex bolt with a flat washer while the later one was a knurled socket screw that uses a 3/16" Allen Wrench. Both are 3/8"-16 x 1/2" long. The picture below is the Hex Bolt but without the flat washer.
- 102-37 Hex Hd Cap Screw.jpg (136.44 KiB) Viewed 860 times
The Picture below is the knurled socket screw.
- A 2333 Screw - Socket - Knurl - belt cover.jpg (181.25 KiB) Viewed 857 times