Down for Scheduled Maintenance

Moderator: admin

User avatar
dusty
Platinum Member
Posts: 21530
Joined: Wed Nov 22, 2006 6:52 am
Location: Tucson (Wildcat Country), Arizona

Down for Scheduled Maintenance

Post by dusty »

Actually, that should say - "Down for Major Retrofit".

Not that this is at all important to any of you but I thought that I would mention it here and now so that if you never hear from me again you'll know why.

As soon as the FedEx guy arrives today, I will be going off line. If I come back up it will be with increased memory (I'll be maxed out at 1GB), a faster processor and a different operating system (XP). My hard drive capacity is not in question and I am using less than 20% of that. I think that in times past I might have spent money on the wrong upgrades.
"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.
User avatar
beeg
Platinum Member
Posts: 4790
Joined: Sun Oct 14, 2007 2:33 pm
Location: St. Louis,Mo.

Post by beeg »

GOOD LUCK with the upgrade Dusty.
SS 500(09/1980), DC3300, jointer, bandsaw, belt sander, Strip Sander, drum sanders,molder, dado, biscuit joiner, universal lathe tool rest, Oneway talon chuck, router bits & chucks and a De Walt 735 planer,a #5,#6, block planes. ALL in a 100 square foot shop.
.
.

Bob
User avatar
a1gutterman
Platinum Member
Posts: 3653
Joined: Tue Jan 09, 2007 12:45 am
Location: "close to" Seattle

Post by a1gutterman »

Good luck, dusty, and I am sure that we will "see" you again. :)
Tim

Buying US made products will help keep YOUR job or retirement funds safer.
charlese
Platinum Member
Posts: 7501
Joined: Fri Dec 08, 2006 10:46 pm
Location: Lancaster, CA

Post by charlese »

Holy Crimenetly! First - improved knees, then better eyes and now faster and more up to date computing! We all knew you were good, but now? More and better sawdust!

Best Wishes!
Octogenarian's have an earned right to be a curmudgeon.
Chuck in Lancaster, CA
User avatar
tom_k/mo
Platinum Member
Posts: 856
Joined: Mon Jul 14, 2008 3:58 pm
Location: St. Louis, MO
Contact:

Post by tom_k/mo »

charlese wrote:Holy Crimenetly! First - improved knees, then better eyes and now faster and more up to date computing! We all knew you were good, but now? More and better sawdust!

Best Wishes!
We can rebuild him... Stronger, Faster, Better.... ]http://epguides.com/SixMillionDollarMan/logo.jpg[/IMG]
ShopSmith MarkV-520 with Belt Sander, Jointer, Band Saw, Strip Sander, Scroll Saw and Biscuit Jointer SPTs and a DC-3300...
Woodworking Hobbyist (Check out all my Woodworking Plans (http://vbwhiz.isa-geek.net/plans)
Aspiring Sandcarver: Breaking glass one grain at a time.
Black Powder Shooter (love the smell of burning sulfur).
doug45601
Gold Member
Posts: 231
Joined: Sun Nov 02, 2008 1:28 am

Post by doug45601 »

If upgrading an HP computer... better be careful or you will end up with dreaded "BLUE SCREEN" with a message "can not recover, contact HP for service".

good luck!
User avatar
dusty
Platinum Member
Posts: 21530
Joined: Wed Nov 22, 2006 6:52 am
Location: Tucson (Wildcat Country), Arizona

Post by dusty »

doug45601 wrote:If upgrading an HP computer... better be careful or you will end up with dreaded "BLUE SCREEN" with a message "can not recover, contact HP for service".

good luck!
The dreaded "BLUE SCREEN" belongs to Microsoft not HP.

Anyhow, I am back online but am still running Windows 2000. The XP disk I had must have been damaged.

However, I do have a faster motherboard with more memory than before but frankly I cannot see any noticeable difference except in the numbers that show when I view the vital statistics.

I haven't given up on XP. Just have to work it into the budget.

Whoever said Sketchup was free?
"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.
User avatar
etc92guy
Gold Member
Posts: 263
Joined: Mon Aug 25, 2008 10:15 pm
Location: Hartland, WI

Post by etc92guy »

Dusty - I don't mean to be a buttinski, but the motherboard architecture probably isn't going to allow much, if any improvement in performance. The design was set when 233 mHz was state of the art. Tripling that isn't going to do any good if the data pipes into the processor are the same size.

It's time for a new motherboard. And if you drop XP on your current system, it will choke. I did that with a 500 mHz Pentium a few years back for my son. We got away with it because we used a sizeable video card instead of the onboard one, but he used his birthday money for a current motherboard within a year. After he did that he was as happy as a clam....if clams can be happy
User avatar
Randy
Gold Member
Posts: 77
Joined: Sat Dec 29, 2007 8:46 pm
Location: Montreal, Quebec

Post by Randy »

I would have been better to go to a big box store and spend a few bucks and got a brand new box with all the bells and whistles.....

For the cost now a days it sometimes does not pay to upgrade.
ldh
Gold Member
Posts: 430
Joined: Sun Sep 10, 2006 6:09 pm
Location: Phoenix, AZ

Post by ldh »

For what it's worth, assembly of a pc is not that hard. I tired of paying the price for the hp and others and not getting what I wanted. You get more for your buck when you build and you know what is inside. This site is a good place to start if you are interested.....http://mysuperpc.com/.
ldh
Post Reply