Shopsmith Forums

I just acquired this 10E 7127 needs a little tlc. I think I have all the parts including owners manuals, but not 100% sure so I was wondering if there was a parts inventory list out there someone possibly made where I can go through and check off what I got and what I don’t? I know there is 1 part I do need and it is the top pulley as the one I got is damaged with a good size chip taken from it. It might, might be able to be repaired at a machine shop but would be nice to get a replacement if that’s even possible. Here is some pics of what I got. I uploaded and posted links for better quality photos. I haven’t gone through everything yet, just got it yesterday.

https://i.imgur.com/hEfsEHd.jpg
https://i.imgur.com/O7Flkha.jpg
https://i.imgur.com/Bvl99XU.jpg
https://i.imgur.com/z8j1WFr.jpg
https://i.imgur.com/8WqEnxV.jpg
https://i.imgur.com/p4ikbIu.jpg
https://i.imgur.com/cqhKDzu.jpg
https://i.imgur.com/hoYYZVd.jpg

Congrats on the machine, and also for finding another copy of the very rare original Preliminary Owner’s Manual. Here’s a copy of the packing list for that vintage machine, if that helps with inventory.
. For reference to what each of these line items looks like, refer to this volume in your document set. It has exploded views and part numbers in the back.
.

Graeme,

Welcome to the Shopsmith Forum. I think you will enjoy being part of this forum maybe even better than the FB one. As John has already said you have one of the rare original copies of the manual. Please do protect it and use copies for general reference. A PDF of this manual is available under the Maintenance and Repair section for Shopsmith Large Format Drawings, Illustrations and More by Everett Davis. This will be one of the first four topics. In it you will find a wealth of information on the Shopsmith tools. Some are directly linked there and others are on “My Google Drive” with documents too large to be directly linked. Everett has become the Shopsmith historian by saving and restoring manuals and other documents. In his My Google Drive under 10E & 10ER you will find the PDF of this original manual along with a later Model 10E Owner's Guide. The later Owner's Guide has the explodes drawings and parts lists. There may be some slight differences between your Model 10E and the parts shown in the Owner's Guide.

In the picture of the cooler showing the rod with the collar and the threaded part they belong to the Table Rising Assembly which is the less common one used on the Model 10's and rare. Another part of the Table Raising Assembly is mounted on the Carriage. As for the pictures it is better to add the pictures directly in the post rather than having them linked as those can disappear over time. You may have to reduce the file size of the pictures to post them. I did notice yours has both the original Wood Extension Table and the later Metal Extension Table. These use different Tailstocks and hopefully you have both. You also have both the original Fence and the later Fence with a rear lock. I would guess the original owner bought the Metal Extension Table Upgrade. You can use the later Model 10ER Owner's Guide found on Everett's My Google Drive as a reference for the Metal Extension Table's use.

A replacement Pulley can be found used at online auctions like ebay. Do make sure you are getting the 13/16" bore Headstock Pulley and not one for the Motor. Also, I do not recommend you running your Model 10E with the belts mis-aligned as they show in the picture.

The picture below is a Model 10E I restored that is very similar to what yours would have looked like when new plus on a bench. It does have the later Miter instead of the one it would have come with originally. Your has the original Miter for this era of Model 10E's.

_