Please help diy longworth project
Moderator: admin
-
taylorleemusic
- Bronze Member
- Posts: 6
- Joined: Sat Aug 15, 2009 9:14 am
Please help diy longworth project
Does anyone know where I might could find the part shown here to attach the chuck to the shopsmith? http://www.shopsmith.net/forums/attachm ... 1200775151 thanks in advance Taylor
I'm knot sure which part your talking about, but the faceplate can be bought from SS.
SS 500(09/1980), DC3300, jointer, bandsaw, belt sander, Strip Sander, drum sanders,molder, dado, biscuit joiner, universal lathe tool rest, Oneway talon chuck, router bits & chucks and a De Walt 735 planer,a #5,#6, block planes. ALL in a 100 square foot shop.
.
.
Bob
.
.
Bob
-
judaspre1982
- Platinum Member
- Posts: 1237
- Joined: Tue Jul 08, 2008 10:10 pm
-==============================
Last edited by judaspre1982 on Sun May 14, 2017 12:17 pm, edited 1 time in total.
-
taylorleemusic
- Bronze Member
- Posts: 6
- Joined: Sat Aug 15, 2009 9:14 am
-
robinson46176
- Platinum Member
- Posts: 4182
- Joined: Mon Mar 09, 2009 9:00 pm
- Location: Central Indiana (Shelbyville)
Some where there must be a mountain (or a landfill) of faceplates for Shopsmiths.
Of all of the SS's I have bought used (roughly 2 dozen) almost none came with a face plate of either size. I bought one of each with my 510 but I don't recall more than one or two that I bought having one. I would have thought that almost everybody would have had one.
Of all of the SS's I have bought used (roughly 2 dozen) almost none came with a face plate of either size. I bought one of each with my 510 but I don't recall more than one or two that I bought having one. I would have thought that almost everybody would have had one.
--
farmer
Francis Robinson
I did not equip with Shopsmiths in spite of the setups but because of them.
1 1988 - Mark V 510 (bought new), 4 Poly vee 1 1/8th HP Mark V's, Mark VII, 1 Mark V Mini, 1 Frankensmith, 1 10-ER, 1 Mark V Push-me-Pull-me Drillpress, SS bandsaw, belt sander, jointer, jigsaw, shaper attach, mortising attach, TS-3650 Rigid tablesaw, RAS, 6" long bed jointer, Foley/Belsaw Planer/molder/ripsaw, 1" sander, oscillating spindle/belt sander, Scroll saw, Woodmizer sawmill
farmer
Francis Robinson
I did not equip with Shopsmiths in spite of the setups but because of them.
1 1988 - Mark V 510 (bought new), 4 Poly vee 1 1/8th HP Mark V's, Mark VII, 1 Mark V Mini, 1 Frankensmith, 1 10-ER, 1 Mark V Push-me-Pull-me Drillpress, SS bandsaw, belt sander, jointer, jigsaw, shaper attach, mortising attach, TS-3650 Rigid tablesaw, RAS, 6" long bed jointer, Foley/Belsaw Planer/molder/ripsaw, 1" sander, oscillating spindle/belt sander, Scroll saw, Woodmizer sawmill
-
taylorleemusic
- Bronze Member
- Posts: 6
- Joined: Sat Aug 15, 2009 9:14 am
Well after reading the previous reply and talking with my wife (she's got the brains), we came to realize that maybe I had this part! You see, my father-in-law let me pack up all his SS parts and use them. Sure enough both faceplates in the link above were packed neatly in the bottom of a well worn cardboard box! Thanks for the help.
GREAT when ya need something and find out ya HAVE IT already.
SS 500(09/1980), DC3300, jointer, bandsaw, belt sander, Strip Sander, drum sanders,molder, dado, biscuit joiner, universal lathe tool rest, Oneway talon chuck, router bits & chucks and a De Walt 735 planer,a #5,#6, block planes. ALL in a 100 square foot shop.
.
.
Bob
.
.
Bob