Page 2 of 3
Re: Everything Mark 5 / V - Technical info, documentation, l
Posted: Wed Dec 03, 2014 1:51 pm
by admin
cadman57 wrote:Why are a number of the links not able to be shown .............. something about "Religion" problem and showing the information is halted ???
This has to be an incorrect situation ............. is it because some of the titles say "Reborn .........."
How crazy is this ???
dave
They should work now.
Re: how hard should it be to turn the thickness planer adjustment
Posted: Thu Feb 09, 2017 4:25 pm
by Hobbyman2
onevw wrote:I got this thickness planer with the cast alum round handle used to adjust the plate. It is hard to turn, I lubed the lead screws with bo-shield a light lubricant usually used for Alum. But is still very hard the turn handle. Not sure how hard this should be. And help will be appreciated.
Thanks RICK
======================
It is probably dust..
I am no expert ,,,,so allow me to just ask a question,,,, when the table moves up and down ,,,,,it slides in a track on the ends,,, could they be full of dust ,,or even rust?
my dad has a planer that adjust the table with a chain when ya turn the crank handle, constant cleaning is a good thing.
good luck
Hobbyman2
Re: Everything Mark 5 / V - Technical info, documentation, links
Posted: Thu Feb 09, 2017 8:53 pm
by JPG
It should turn quite easily.
I would be suspicious of the elevator(jack screws) sprockets being out of sync with each other. Have you checked the side to side/front to rear alignment to the cross bars?
Re: Everything Mark 5 / V - Technical info, documentation, links
Posted: Wed Mar 29, 2017 5:16 pm
by reddogsolar
Good afternoon JPG,
I picked up a shopsmith at the town dump recently. Needed to reverse engineer the power plant lock to get it from moving down the rails. Question, just bought some sanding parts from Shopsmith and a instruction manual but none of the Mark V model 500 or Mark V model 510 pats match my machine.
The red disc has Model ER serial no. ER35189. wish to find a shop manual to learn about the RPM speeds and set ups.
Thank you
Hartley
Re: Everything Mark 5 / V - Technical info, documentation, links
Posted: Wed Mar 29, 2017 9:17 pm
by JPG
Your turn Everett.
Re: Everything Mark 5 / V - Technical info, documentation, links
Posted: Mon May 08, 2017 3:10 pm
by everettdavis
Sorry JPG,
I have been out of the loop on this one.
I would advise them to follow the link at
https://www.shopsmith.com/ss_forum/view ... 90#p185690
Find the
My Google Drive link just after the first four PDF's and find the Fully Restored 10E and 10ER manuals under the 10E& 10ER folders. You can download them and find a good bit of other information on the 10E and 10ER's.
Re: Everything Mark 5 / V - Technical info, documentation, links
Posted: Thu Oct 14, 2021 9:29 pm
by jsburger
SPAM coming!
Re: Everything Mark 5 / V - Technical info, documentation, links
Posted: Mon Oct 18, 2021 1:34 am
by everettdavis
jsburger wrote: ↑Thu Oct 14, 2021 9:29 pmSPAM coming!
Why would spam be coming now?
You were the first person to post in this thread since May 8, 2017.
Everett
Re: Everything Mark 5 / V - Technical info, documentation, links
Posted: Mon Oct 18, 2021 10:21 am
by edma194
I imagine an admin has removed some intervening post.
Re: Everything Mark 5 / V - Technical info, documentation, links
Posted: Mon Oct 18, 2021 12:43 pm
by jsburger
edma194 wrote: ↑Mon Oct 18, 2021 10:21 am
I imagine an admin has removed some intervening post.
Yes admin/moderator removed the posts.