Looking for Mark 5 parts

Forum for Maintenance and Repair topics. Feel free to ask questions or contribute.

Moderator: admin

Post Reply
ssdaughterinmt
Bronze Member
Posts: 3
Joined: Tue Jan 18, 2011 2:03 pm

Looking for Mark 5 parts

Post by ssdaughterinmt »

When my 83-yr-old father moved to Montana, the movers dropped his Mark 5 ShopSmith and parts were broken.

I am looking for the following:
- Carriage assembly;
- worktable assembly, and
- rip fence.

Has anyone upgraded and wish to sell old parts?
User avatar
wingrider
Gold Member
Posts: 58
Joined: Tue May 04, 2010 11:39 pm
Location: Kingston, IL

Post by wingrider »

[quote="ssdaughterinmt"]When my 83-yr-old father moved to Montana, the movers dropped his Mark 5 ShopSmith and parts were broken.

I am looking for the following:
- Carriage assembly]

I don't post on here much. If you go on eBay, all the parts you are looking for are availably. Just saw a table and rip fence listed for $39. You might want to have a look and see what you can find. If you can't find what you are looking for I'm sure there are others that can point you in the right direction.
User avatar
curiousgeorge
Platinum Member
Posts: 880
Joined: Tue Feb 27, 2007 1:00 am
Location: Fort Worth, Texas

Post by curiousgeorge »

[quote="ssdaughterinmt"]When my 83-yr-old father moved to Montana, the movers dropped his Mark 5 ShopSmith and parts were broken.

I am looking for the following:
- Carriage assembly]
Check the ShopSmith web site...

Click Here
George
Ft. Worth, TX.
Go TCU Froggies
User avatar
SDSSmith
Platinum Member
Posts: 1940
Joined: Mon Dec 04, 2006 6:35 pm
Location: San Diego, CA

Post by SDSSmith »

[quote="ssdaughterinmt"]When my 83-yr-old father moved to Montana, the movers dropped his Mark 5 ShopSmith and parts were broken.

I am looking for the following:
- Carriage assembly]I have these parts if you want to contact me at the email address below.
Rob in San Diego
Email: SDSSmith51 AT gmail.com
ssdaughterinmt
Bronze Member
Posts: 3
Joined: Tue Jan 18, 2011 2:03 pm

Post by ssdaughterinmt »

Thanks; I'll take a look.
ssdaughterinmt
Bronze Member
Posts: 3
Joined: Tue Jan 18, 2011 2:03 pm

Post by ssdaughterinmt »

I'll contact you directly.
Post Reply