Page 1 of 2
Hello? Is this thing on?
Posted: Sat Jan 29, 2011 7:01 pm
by agsmx
Ok, it works. . .
Hey everyone. Mark V owner here. It's in a hundred pieces at the moment, but coming together slowly.
Posted: Sat Jan 29, 2011 7:36 pm
by ryanbp01
Hi there!-
If you have any questions, just ask. And welcome aboard!
BPR
Posted: Sat Jan 29, 2011 7:49 pm
by joedw00
Welcome to the forum. There is a lot of knowledge here. Good luck putting it back together.
Posted: Sat Jan 29, 2011 8:37 pm
by agsmx
Thanks guys. I will be sure to do so.
Hello, Is this thing on?
Posted: Sun Jan 30, 2011 4:13 am
by dusty
Hello, to you too. Looking forward to what ever you might have.
Posted: Sun Jan 30, 2011 9:26 am
by rkh2
Welcome agsmx from a neighbor to the north. Wishing you well as you get your machine back together and running.
Here we go. . .
Posted: Sun Jan 30, 2011 9:35 pm
by agsmx
Ok, I got everything categorized for easy reassembly.
[ATTACH]11693[/ATTACH]
Removing rust with electrolysis. I built a box for the bench tubes using someones method I found on this forum. I would love to credit him, but I forgot who it was. . .
[ATTACH]11694[/ATTACH]
Again, using someones method to polish the tubes.
[ATTACH]11695[/ATTACH] [ATTACH]11696[/ATTACH]
The tubes were damaged pretty bad because of the rust. The holes are about 5cm deep.
[ATTACH]11699[/ATTACH]
Posted: Sun Jan 30, 2011 9:37 pm
by agsmx
Here are the pics from the last post. For some reason they didn't show up. . .
[ATTACH]11700[/ATTACH] [ATTACH]11701[/ATTACH]
Posted: Sun Jan 30, 2011 11:03 pm
by JPG
agsmx wrote:Ok, I got everything categorized for easy reassembly.
[ATTACH]11693[/ATTACH]
Removing rust with electrolysis. I built a box for the bench tubes using someones method I found on this forum. I would love to credit him, but I forgot who it was. . .
[ATTACH]11694[/ATTACH]
Again, using someones method to polish the tubes.
[ATTACH]11695[/ATTACH] [ATTACH]11696[/ATTACH]
The tubes were damaged pretty bad because of the rust. The holes are about 5cm deep.
[ATTACH]11699[/ATTACH]
MickyD
Heathicus
Wow! that is deeper than the od! 5cm is almost 2 inches! They look more like 0.5 mm.
Posted: Mon Jan 31, 2011 6:40 pm
by agsmx
Did I say 5cm??? Wow. . .