Win a day with Tommy Mac
Moderator: admin
Win a day with Tommy Mac
For a chance to Win a day with Tommy Mac. Enter Here.
Joe
520, Bandsaw, Beltsander, Delta Drill Press, Delta Lathe, Craftsman Planner/Jointer, Delta Planner, Mini "Greenie" Shorty 500
Being a VETERAN is an honor
Being a GRANDPA is priceless
520, Bandsaw, Beltsander, Delta Drill Press, Delta Lathe, Craftsman Planner/Jointer, Delta Planner, Mini "Greenie" Shorty 500
Being a VETERAN is an honor
Being a GRANDPA is priceless
- camerio
- Platinum Member
- Posts: 599
- Joined: Fri Aug 11, 2006 8:01 am
- Location: Valcartier, just north of Quebec City, CANADA
Sadly, it is not open to canadian woodworker.joedw00 wrote:For a chance to Win a day with Tommy Mac. Enter Here.
I like Tommy Mac but it is over already on Detroit Public System where I can see PBS. We try to subscribe as much as we can to that very nice PBS network.
Camerio
MarkV 520 & Band saw
MarkV 520 & Band saw
I'm not too sure I could spend a whole day with Tommy Mac.
________________________________________________________________________________________________
1981 Mark V 500, bandsaw, belt sander, jig saw, jointer; contractor's table saw; multiple circular saws and miter saws; and a trailer full of tools.
"It is better to remain silent and thought a fool than to speak out and remove all doubt"
Abraham Lincoln
1981 Mark V 500, bandsaw, belt sander, jig saw, jointer; contractor's table saw; multiple circular saws and miter saws; and a trailer full of tools.
"It is better to remain silent and thought a fool than to speak out and remove all doubt"
Abraham Lincoln
I would have to agree with you. Now if it was Norm that would be different.anmius wrote:I'm not too sure I could spend a whole day with Tommy Mac.

Joe
520, Bandsaw, Beltsander, Delta Drill Press, Delta Lathe, Craftsman Planner/Jointer, Delta Planner, Mini "Greenie" Shorty 500
Being a VETERAN is an honor
Being a GRANDPA is priceless
520, Bandsaw, Beltsander, Delta Drill Press, Delta Lathe, Craftsman Planner/Jointer, Delta Planner, Mini "Greenie" Shorty 500
Being a VETERAN is an honor
Being a GRANDPA is priceless
Yup, I could spend a day (or more) with Norm. Love to meet him some day and he is only a couple of hours away.joedw00 wrote:I would have to agree with you. Now if it was Norm that would be different.
________________________________________________________________________________________________
1981 Mark V 500, bandsaw, belt sander, jig saw, jointer; contractor's table saw; multiple circular saws and miter saws; and a trailer full of tools.
"It is better to remain silent and thought a fool than to speak out and remove all doubt"
Abraham Lincoln
1981 Mark V 500, bandsaw, belt sander, jig saw, jointer; contractor's table saw; multiple circular saws and miter saws; and a trailer full of tools.
"It is better to remain silent and thought a fool than to speak out and remove all doubt"
Abraham Lincoln
- dusty
- Platinum Member
- Posts: 21481
- Joined: Wed Nov 22, 2006 6:52 am
- Location: Tucson (Wildcat Country), Arizona
I never got the feeling that Norm entertained any visitors that he did not specifically invite. I don't remember exactly when but he was openly secretive about the location of his shop. He brought a couple visitors in blind folded.
My memory may be defective but it seems like his shop was somewhere in Worchester (Wooster), MA. It seems that he and Tommy did a lot of This Old House on properties in that area too.
If you don't want to spend time with Tommy Mac, you can always spent an hour with Norm here. The featured item is changed every week and most are projects of the past. Some are reborn and others are rerun.
My memory may be defective but it seems like his shop was somewhere in Worchester (Wooster), MA. It seems that he and Tommy did a lot of This Old House on properties in that area too.
If you don't want to spend time with Tommy Mac, you can always spent an hour with Norm here. The featured item is changed every week and most are projects of the past. Some are reborn and others are rerun.
"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.
Dusty
Sent from my Dell XPS using Firefox.
It is my understanding that his shop was on the property of his producer Russell Morash and was in his (not Norm's) back yard. The story I have heard more than once is that Russ hired Norm to do some work for him and was impressed with his skill and personality. He was hired to be on "This Old House" and the rest is history (as some say). Russ lives near Lexington, Massachusetts which is not too far from where another of his productions, The Victory Garden, is/was located. So, in a nut shell, Norm's shop was not actually his, but Russ' shop (and still is Russ' shop).
________________________________________________________________________________________________
1981 Mark V 500, bandsaw, belt sander, jig saw, jointer; contractor's table saw; multiple circular saws and miter saws; and a trailer full of tools.
"It is better to remain silent and thought a fool than to speak out and remove all doubt"
Abraham Lincoln
1981 Mark V 500, bandsaw, belt sander, jig saw, jointer; contractor's table saw; multiple circular saws and miter saws; and a trailer full of tools.
"It is better to remain silent and thought a fool than to speak out and remove all doubt"
Abraham Lincoln
- dusty
- Platinum Member
- Posts: 21481
- Joined: Wed Nov 22, 2006 6:52 am
- Location: Tucson (Wildcat Country), Arizona
I don't know about property ownership but I understood that in the early shows both Morash and Norm received demo model equipment from the manufacturers in exchange for using it on the shows. I would have worked for one each of all the routers that Norm introduced and one of the Mark Vs.anmius wrote:It is my understanding that his shop was on the property of his producer Russell Morash and was in his (not Norm's) back yard. The story I have heard more than once is that Russ hired Norm to do some work for him and was impressed with his skill and personality. He was hired to be on "This Old House" and the rest is history (as some say). Russ lives near Lexington, Massachusetts which is not too far from where another of his productions, The Victory Garden, is/was located. So, in a nut shell, Norm's shop was not actually his, but Russ' shop (and still is Russ' shop).
Norm's Mark V must have been almost like brand new. He used it very little and for only a few shows.
"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.
Dusty
Sent from my Dell XPS using Firefox.
- robinson46176
- Platinum Member
- Posts: 4182
- Joined: Mon Mar 09, 2009 9:00 pm
- Location: Central Indiana (Shelbyville)
dusty wrote: Norm's Mark V must have been almost like brand new. He used it very little and for only a few shows.
I wonder where it went? It would be cool to have it and have it documented...
They had one sitting at one end of the woodshop at BSU (Muncie IN) in 1961. It looked like new and I never saw anybody ever touch it.
.
--
farmer
Francis Robinson
I did not equip with Shopsmiths in spite of the setups but because of them.
1 1988 - Mark V 510 (bought new), 4 Poly vee 1 1/8th HP Mark V's, Mark VII, 1 Mark V Mini, 1 Frankensmith, 1 10-ER, 1 Mark V Push-me-Pull-me Drillpress, SS bandsaw, belt sander, jointer, jigsaw, shaper attach, mortising attach, TS-3650 Rigid tablesaw, RAS, 6" long bed jointer, Foley/Belsaw Planer/molder/ripsaw, 1" sander, oscillating spindle/belt sander, Scroll saw, Woodmizer sawmill
farmer
Francis Robinson
I did not equip with Shopsmiths in spite of the setups but because of them.
1 1988 - Mark V 510 (bought new), 4 Poly vee 1 1/8th HP Mark V's, Mark VII, 1 Mark V Mini, 1 Frankensmith, 1 10-ER, 1 Mark V Push-me-Pull-me Drillpress, SS bandsaw, belt sander, jointer, jigsaw, shaper attach, mortising attach, TS-3650 Rigid tablesaw, RAS, 6" long bed jointer, Foley/Belsaw Planer/molder/ripsaw, 1" sander, oscillating spindle/belt sander, Scroll saw, Woodmizer sawmill
That is very common place for shows in any industry.dusty wrote:I don't know about property ownership but I understood that in the early shows both Morash and Norm received demo model equipment from the manufacturers in exchange for using it on the shows. I would have worked for one each of all the routers that Norm introduced and one of the Mark Vs.
Norm's Mark V must have been almost like brand new. He used it very little and for only a few shows.
Brad
Fenton, MI
'90 SS 500 updated to 520
SS ProPlaner w/ power base, Power base, Band Saw, Jig Saw, Belt Sander, Strip Sander, Jointer and Dust Collector
Fenton, MI
'90 SS 500 updated to 520
SS ProPlaner w/ power base, Power base, Band Saw, Jig Saw, Belt Sander, Strip Sander, Jointer and Dust Collector