new toy need to know more

Forum for Maintenance and Repair topics. Feel free to ask questions or contribute.

Moderator: admin

Post Reply
tinman65
Bronze Member
Posts: 1
Joined: Sat Jul 02, 2011 5:53 pm

new toy need to know more

Post by tinman65 »

Hello I found a shop smith 10 er so I am told it is my first one and this is my first post it was found in old shop the man sell's all kinds of old junk I picked it up and started taking it a part. I have it moving and running now I need to find out how to use it
:)
damagi
Platinum Member
Posts: 927
Joined: Wed Jan 06, 2010 6:06 pm
Location: near Seattle, WA

Post by damagi »

tinman65 wrote:Hello I found a shop smith 10 er so I am told it is my first one and this is my first post it was found in old shop the man sell's all kinds of old junk I picked it up and started taking it a part. I have it moving and running now I need to find out how to use it
:)
There is a yahoo group dedicated to the 10er, which is probably your best bet. You will find some 10er information on this board, but its not as rich as the info in the group.

If you have specific questions then we can probably be more helpful.
Mark 7, Pro Planer, Jointer, Bandsaw w/Kreg, Biscuit Joiner, Belt Sander, Jig Saw, Ringmaster, DC3300, Overarm Pin Router, Incra Ultimate setup

JWBS-14 w/6" riser, RBI Hawk 226 Ultra, Bosch GSM12SD Axial Glide Dual Compound Miter Saw

-- I have parts/SPTs available, so if you are in the Seattle area and need something let me know --
damagi AT gmail DOT com
damagi
Platinum Member
Posts: 927
Joined: Wed Jan 06, 2010 6:06 pm
Location: near Seattle, WA

Post by damagi »

http://www.songofthegreatlakes.com/ss10ermanual.htm

That might be helpful if yours didn't come with one.
Mark 7, Pro Planer, Jointer, Bandsaw w/Kreg, Biscuit Joiner, Belt Sander, Jig Saw, Ringmaster, DC3300, Overarm Pin Router, Incra Ultimate setup

JWBS-14 w/6" riser, RBI Hawk 226 Ultra, Bosch GSM12SD Axial Glide Dual Compound Miter Saw

-- I have parts/SPTs available, so if you are in the Seattle area and need something let me know --
damagi AT gmail DOT com
User avatar
skou
Platinum Member
Posts: 1944
Joined: Fri Feb 16, 2007 2:53 am
Location: Mesa (near Phoenix) Az

Post by skou »

Tinman, go to the yahoo ER group. Join the group.

At the bottom of all the posts, there is a link to our Gmail page, where we have TONS of stuff posted.

If you have ANY questions, ask. I'm SURE you'll get answers.

steve
Post Reply