I recently began carving crosses in the celtic style. I got a couple of slabs of spalted maple from a friend, then made one to thank him. Then I made another, and currently have about a dozen on the go. I made the one (below) for my church, The Church Of The Ascension in Langley, B.C., and it was dedicated last Sunday.
Used the SS to do some of the initial shape preparationa nd much of the sanding. The finish is umpteen coats of Tung Oil, first time I have used it.
My little enterprise is to be called 'Knots And Crosses - Carvery'
[ATTACH]15926[/ATTACH]
[ATTACH]15927[/ATTACH]
Derek in Vancouver-ish
Latest work
Moderator: admin
-
derekdarling
- Gold Member
- Posts: 318
- Joined: Wed Mar 17, 2010 2:53 pm
- Location: Surrey, BC
Latest work
- Attachments
-
- AscensionCrossPrep.jpg (450.59 KiB) Viewed 1969 times
-
- AscensionCrossPrep2.jpg (230.37 KiB) Viewed 1962 times
Derek Darling
Surrey, B.C. Canada
10ERs, other stuff, you know.
Surrey, B.C. Canada
10ERs, other stuff, you know.
-
terrydowning
- Platinum Member
- Posts: 1678
- Joined: Mon Jul 19, 2010 3:26 pm
- Location: Windsor, CO
-
JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
She gonna do the hand carving?:rolleyes:garys wrote:Very nice. My Wife is Irish, and she wants to do that too now.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
-
derekdarling
- Gold Member
- Posts: 318
- Joined: Wed Mar 17, 2010 2:53 pm
- Location: Surrey, BC
New Work
Well, if I charged $1,000 for the piece, I wouldn't make minimum wage (currently $10.25 CDN), but I found that the work itself is very meditative.mrhart wrote:...How much time ina carving like that?
I did use the following 'short cuts':
1. I printed the pattern from the computer, then used carbon-paper to trace the design on the wood. this is very time-consuming, and I am considering hacking an old printer to move the wood directly under the print-head. I looked into direct-transfer paper (mostly for iron-on transfers to cloth), but didn't like the resulting mess.
2. I confess to using a Dremel to hog out the background down to about 3/8" depth, although all the actual knot-carving was done by chisel, knife, rasp, file, finer file, sandpaper, finer sandpaper, even finer sandpaper, dental picks (to get into the tight corners). Then several layers of Tung Oil, with steel-wool between. Still took lots of time.
I have been looking at CNC machines, but then... it wouldn't be 'hand-carved', would it? Thanks for the kind words.
Derek Darling
Surrey, B.C. Canada
10ERs, other stuff, you know.
Surrey, B.C. Canada
10ERs, other stuff, you know.