Sanding Disc Arbors

Create a review for a woodworking tool that you are familiar with (Shopsmith brand or Non-Shopsmith) or just post your opinion on a specific tool. Head to head comparisons welcome too.

Moderator: admin

Post Reply
User avatar
dgale
Platinum Member
Posts: 1007
Joined: Fri Jul 13, 2012 1:17 am
Location: Dows Prairie, CA

Sanding Disc Arbors

Post by dgale »

I noticed the newer sanding disc arbors are longer to accommodate the 510/520 models - any reason these longer arbors wouldn't work fine on a 500?
Top
User avatar
beeg
Platinum Member
Posts: 4790
Joined: Sun Oct 14, 2007 2:33 pm
Location: St. Louis,Mo.

Post by beeg »

I use one on my 500 with no problem. Since I only bring it up to the table side.
SS 500(09/1980), DC3300, jointer, bandsaw, belt sander, Strip Sander, drum sanders,molder, dado, biscuit joiner, universal lathe tool rest, Oneway talon chuck, router bits & chucks and a De Walt 735 planer,a #5,#6, block planes. ALL in a 100 square foot shop.
.
.
Bob
Top
User avatar
dgale
Platinum Member
Posts: 1007
Joined: Fri Jul 13, 2012 1:17 am
Location: Dows Prairie, CA

Post by dgale »

So what limitations would I encounter using the longer arbor on a 500? It seems that SS only sells the disc now with the longer arbor, so just wondering if there's any advantage to tracking down an older version with the shorter arbor?
Top
User avatar
SDSSmith
Platinum Member
Posts: 1940
Joined: Mon Dec 04, 2006 6:35 pm
Location: San Diego, CA

Post by SDSSmith »

My 1989 model 500 came with the longer hub. Since the sanding discs, short or long hub do not fit the lower guards of the 500. Sanding is done on the edge of the table so there should be no issues using either on the 500. SS markets a sanding guard that is basically a stripped down 510/520 lower guard. The sanding guard also must be used on the edge of the 500 table.

If it were me, I would buy the longer hubs so that if I upgraded to a 510/520/7 I could continue to use the discs with the newer guards.
Rob in San Diego
Email: SDSSmith51 AT gmail.com
Top
User avatar
beeg
Platinum Member
Posts: 4790
Joined: Sun Oct 14, 2007 2:33 pm
Location: St. Louis,Mo.

Post by beeg »

dgale wrote:So what limitations would I encounter using the longer arbor on a 500?

As long as your using it up against the table. The only thing I can think of is a somewhat shorter length ya can sand using the fence.
SS 500(09/1980), DC3300, jointer, bandsaw, belt sander, Strip Sander, drum sanders,molder, dado, biscuit joiner, universal lathe tool rest, Oneway talon chuck, router bits & chucks and a De Walt 735 planer,a #5,#6, block planes. ALL in a 100 square foot shop.
.
.
Bob
Top
User avatar
JPG
Platinum Member
Posts: 35598
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Post by JPG »

beeg wrote:As long as your using it up against the table. The only thing I can think of is a somewhat shorter length ya can sand using the fence.

?????????????:confused:
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Top
damagi
Platinum Member
Posts: 927
Joined: Wed Jan 06, 2010 6:06 pm
Location: near Seattle, WA

Post by damagi »

One diference has to do with the lower saw guard, which can be used for dust collection. 500 lower saw guard works with 500 style arbors on the sanding disk. Longer arbors are suited for the 505/510/520 style guard. if you aren't using the lower saw guard for dust collection then it doesn't matter much.
Mark 7, Pro Planer, Jointer, Bandsaw w/Kreg, Biscuit Joiner, Belt Sander, Jig Saw, Ringmaster, DC3300, Overarm Pin Router, Incra Ultimate setup

JWBS-14 w/6" riser, RBI Hawk 226 Ultra, Bosch GSM12SD Axial Glide Dual Compound Miter Saw

-- I have parts/SPTs available, so if you are in the Seattle area and need something let me know --
damagi AT gmail DOT com
Top
User avatar
SDSSmith
Platinum Member
Posts: 1940
Joined: Mon Dec 04, 2006 6:35 pm
Location: San Diego, CA

Post by SDSSmith »

damagi wrote:One diference has to do with the lower saw guard, which can be used for dust collection. 500 lower saw guard works with 500 style arbors on the sanding disk. Longer arbors are suited for the 505/510/520 style guard. if you aren't using the lower saw guard for dust collection then it doesn't matter much.
I am now sure the 12" disc will not fit inside a 500 lower guard.

Thanks oldc6.;)
Rob in San Diego
Email: SDSSmith51 AT gmail.com
Top
oldc6
Gold Member
Posts: 233
Joined: Mon Feb 11, 2008 9:22 pm
Location: central minnesota

sanding disc and 500

Post by oldc6 »

The sanding disc will not fit into the 500 lower blade guard. A couple of years ago i bought the 510-520 lower guard to use with sanding disc.
Works great for dust collection but, can only be used on edge of table.
dust port of lower guard hits on table upright because 500 is narrower table.

I like using the edge of table because it gives you more table to keep workpiece flat to table. could be used in center of table with the 510 or520

see attached pictures[ATTACH]19184[/ATTACH]

[ATTACH]19185[/ATTACH]

[ATTACH]19186[/ATTACH]

[ATTACH]19187[/ATTACH]
Attachments
IMG_2704.JPG
IMG_2704.JPG (79.28 KiB) Viewed 1360 times
IMG_2703.JPG
IMG_2703.JPG (74.44 KiB) Viewed 1354 times
IMG_2705.JPG
IMG_2705.JPG (76.66 KiB) Viewed 1360 times
IMG_2706.JPG
IMG_2706.JPG (81.98 KiB) Viewed 1358 times
Top
Post Reply

Return to “Woodworking Tool Review”