LJ Table Saw Posting

Moderator: admin

User avatar
BuckeyeDennis
Platinum Member
Posts: 3813
Joined: Tue Jul 24, 2012 10:03 pm
Location: Central Ohio

Post by BuckeyeDennis »

frank81 wrote:One year I was struggling to find a Spring project locally, and settled on an 83 Porsche 944 which is the absolute cheapest, most wannabe Porsche ever made.
I think that I must have thread-hijacking desease. I keep seeing these really interesting tidbits that are totally tangent to the topic at hand, and probably not worth a thread of their own. But I can't help myself .. I just have explore them.

So I got a graduate engineering degree from Ohio State in 1982, and immediately landed a fun and good-paying research job at OSU. I was a freshly-minted yuppie, to be perfectly frank. I had been subscribing to Car & Driver for a few years, and was lusting after a Porsche 944. (Hey, I still find them prettier than 911's). By 1984, my old car was dying. And still being single, not to mention childless, I had sufficient disposable income to make payments on anything much short of a super-car.

But my modest rural upbringing and generally conservative nature told me that spending $18k on a brand-new 944 would be an unwise, extravagant expenditure. So instead, I bought a brand-new 1984 VW Scirrocco for a bit under $12K -- the cheapest "real" sports car on the market at the time, according to Car & Driver. It was indeed a good car, and I enjoyed it well. In 1998, 14 years and 150k miles later, I donated it to The Nature Conservancy.

And what were 1984 Porsche 944's selling for in 1998? Yep, $18k -- same as they sold for brand new. :confused:
User avatar
mrhart
Platinum Member
Posts: 938
Joined: Thu Nov 25, 2010 4:38 pm
Location: Meridian Idaho

Post by mrhart »

BuckeyeDennis wrote:I think that I must have thread-hijacking desease.

From table saws to an 84 VW Scirracco......that IS off topic, but civil.:)
R Hart
User avatar
BuckeyeDennis
Platinum Member
Posts: 3813
Joined: Tue Jul 24, 2012 10:03 pm
Location: Central Ohio

Post by BuckeyeDennis »

mrhart wrote:From table saws to an 84 VW Scirracco......that IS off topic, but civil.:)
I did check out the carnage on your thread over at LJ earlier today, and must say that I find such rudeness repulsive. At the spinal-cord level.

I hereby swear, as a Southern-born gentleman, that if (and mostly when) self-restraint fails me and I hijack a thread on this friendly forum, I will always endeavor to do so with wit, grace, and hopefully a bit of charm! ;)
User avatar
JPG
Platinum Member
Posts: 35600
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Post by JPG »

[quote="BuckeyeDennis"]I did check out the carnage on your thread over at LJ earlier today, and must say that I find such rudeness repulsive. At the spinal-cord level.

I hereby swear, as a Southern-born gentleman, that if (and mostly when) self-restraint fails me and I hijack a thread on this friendly forum, I will always endeavor to do so with wit, grace, and hopefully a bit of charm! ]

Going off on a tangent started by someone else is not IMHO hi-jacking!:rolleyes:

Please lower that 'bar'.:D
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10
E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
frank81
Gold Member
Posts: 458
Joined: Tue Feb 19, 2013 11:28 am
Location: Marshfield, Missouri

Post by frank81 »

JPG40504 wrote:Going off on a tangent started by someone else is not IMHO hi-jacking!:rolleyes:

Please lower that 'bar'.:D
If we stayed on topic (in the community folder at least), what kind of forum would this be?

I like the fact that we get distracted by squirrels. And then discuss how to best procure and cook them.
User avatar
robinson46176
Platinum Member
Posts: 4182
Joined: Mon Mar 09, 2009 9:00 pm
Location: Central Indiana (Shelbyville)

Post by robinson46176 »

frank81 wrote:If we stayed on topic (in the community folder at least), what kind of forum would this be?

I like the fact that we get distracted by squirrels. And then discuss how to best procure and cook them.


SQUIRREL!!!!!!!!!!! :D :D :D :D :D :D :D :D



I loved that little animated movie. :)


.
--
farmer
Francis Robinson
I did not equip with Shopsmiths in spite of the setups but because of them.
1 1988 - Mark V 510 (bought new), 4 Poly vee 1 1/8th HP Mark V's, Mark VII, 1 Mark V Mini, 1 Frankensmith, 1 10-ER, 1 Mark V Push-me-Pull-me Drillpress, SS bandsaw, belt sander, jointer, jigsaw, shaper attach, mortising attach, TS-3650 Rigid tablesaw, RAS, 6" long bed jointer, Foley/Belsaw Planer/molder/ripsaw, 1" sander, oscillating spindle/belt sander, Scroll saw, Woodmizer sawmill
sawmill
Gold Member
Posts: 296
Joined: Mon Dec 11, 2006 10:10 am
Location: Lake City, Mich

Post by sawmill »

A few years ago I was given a Rockwell contractors saw. I did not have room for it but could not see it get junked out. It has a 1 1/8 hp motor. The owners uncle was a friend of mine and he asked me if I wanted it and after some arm twisting I agreed to take it. The reason it was being junked is because the clip on the end of the rip fence broke. This saw was bought new I am guessing in the 1950's By Maks father and is all cast iron. The table top on it is I am guessing 3 foot by 5 foot. I put it back together and everything was ground so no shims were needed. I was a machinest for over 25 years and I checked it all out and it was ground to within a couple of thousands. It is the smoothest running saw I have ever used and I use it quite often. My friend had a ShopSith and he knew that I did also as this is way he knew I worked with wood until his death a few months afer he gave me the saw. He made doll house furniture. I took my rip fence from my ShopSmith and copied itto make one for my Rockwell and it works great. Now back to the car thing. When I was in Germany in 1972 you could buy a Porshe for starting out around 3600.00 and I looked at them alot but didn't think they would go thru the snow here in Mich very well
User avatar
Culprit
Gold Member
Posts: 234
Joined: Sun Dec 04, 2011 12:37 am
Location: Virginia

Post by Culprit »

frank81 wrote: I like the fact that we get distracted by squirrels. And then discuss how to best procure and cook them.
... slowly, in a crock pot with chicken stock, potatoes, carrots, and onions. Serve with cornbread from a cast iron skillet.
1955 Greenie, modified to be reversible
User avatar
BuckeyeDennis
Platinum Member
Posts: 3813
Joined: Tue Jul 24, 2012 10:03 pm
Location: Central Ohio

Post by BuckeyeDennis »

robinson46176 wrote:SQUIRREL!!!!!!!!!!! :D :D :D :D :D :D



I loved that little animated movie. :)


.
Thanks, guys! I shall henceforth purse interesting tangents on this forum with a spring in my step, AND with a clear conscience.

I loved that movie too. "Up" was the name. The "Squirrel!!!" scene was the best part. The dogs obviously had had a taste of hickory-fed Ohio squirrel. :D :D :D
User avatar
mrhart
Platinum Member
Posts: 938
Joined: Thu Nov 25, 2010 4:38 pm
Location: Meridian Idaho

Post by mrhart »

There is over 100 postings now.

Who is this Deb and Martin or whoever they are talking about??
R Hart
Post Reply