My New Distraction
Moderator: admin
I am with farmer on not being afraid of removing outside skin to fix wood damage. The one I redid had damage where water could get in around a couple of windows and under them and where the awning had town off the front leaving holes in the skin. We did what we could from inside, but had to peel curved skin of teardrop shaped trailer on back for under back window. Took some doing, but made good repair.
Sam in Northfield, MN
A day without beer......could have been better

Mark V 500 - S/N 100990, Mark V 510 - S/N missing, SS Band Saw, SS 6" Belt Sander, SS 4" Jointer, SS Scroll Saw, SS DC3300
A day without beer......could have been better
Mark V 500 - S/N 100990, Mark V 510 - S/N missing, SS Band Saw, SS 6" Belt Sander, SS 4" Jointer, SS Scroll Saw, SS DC3300
- dusty
- Platinum Member
- Posts: 21530
- Joined: Wed Nov 22, 2006 6:52 am
- Location: Tucson (Wildcat Country), Arizona
Until I get the trailer which has been at my daughters home for many years back into the drive way, I don't know what I am up against My son-in-law says that he can see no evidence of water damage on the inside walls. Now I am relatively certain that he has not done a detailed inspection so all I can do is wait and see.
I am hoping that he knows what he is saying because the cost of paneling is a bit more expensive than I had thought. The cost is higher than plywood paneling because it is fire retardant.
Then there is support members. Oh, I wish it was in the drive way. I can not stand the suspense.
I am hoping that he knows what he is saying because the cost of paneling is a bit more expensive than I had thought. The cost is higher than plywood paneling because it is fire retardant.
Then there is support members. Oh, I wish it was in the drive way. I can not stand the suspense.
"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.
Dusty
Sent from my Dell XPS using Firefox.
I'm glad that may help you out. If you end up removing the skin (or not, I know you haven't seen the trailer in years) then screwing the jig to the repaired wood should help ya.dusty wrote:PS: It will work. Thanks for the idea. I have never used the Freg Pocket Screw without being able to clamp. It pays to know how to use your tools.
[ATTACH]21130[/ATTACH]
The odd screw hole is where the capture screw was used.
Should be a fun project. A couple years ago I stumbled upon Glen-L wedsite and was amazed at the truck camper plans. They also have trailer plans. Now since I don't have 1-ton truck I've been looking into tear drop trailers and those look like a project I could handle. Nothing like camping!
-Erich-
1986 Mark V 500, SS Bandsaw, SS Belt Sander, Shaper Package, SS Molder, SS Oscillating Drum Sander, Excalibur EX-II scrollsaw, Central Machine 6 1/8" Jointer, Rigid 13" planer, Various routers and table.
"Remeber, you're unique. Just like everyone else."
"Remeber, you're unique. Just like everyone else."
- robinson46176
- Platinum Member
- Posts: 4182
- Joined: Mon Mar 09, 2009 9:00 pm
- Location: Central Indiana (Shelbyville)
The Classic RV email list on Yahoo is one of the most helpful places I have found.
http://groups.yahoo.com/group/classicrv/
.
http://groups.yahoo.com/group/classicrv/
.
--
farmer
Francis Robinson
I did not equip with Shopsmiths in spite of the setups but because of them.
1 1988 - Mark V 510 (bought new), 4 Poly vee 1 1/8th HP Mark V's, Mark VII, 1 Mark V Mini, 1 Frankensmith, 1 10-ER, 1 Mark V Push-me-Pull-me Drillpress, SS bandsaw, belt sander, jointer, jigsaw, shaper attach, mortising attach, TS-3650 Rigid tablesaw, RAS, 6" long bed jointer, Foley/Belsaw Planer/molder/ripsaw, 1" sander, oscillating spindle/belt sander, Scroll saw, Woodmizer sawmill
farmer
Francis Robinson
I did not equip with Shopsmiths in spite of the setups but because of them.
1 1988 - Mark V 510 (bought new), 4 Poly vee 1 1/8th HP Mark V's, Mark VII, 1 Mark V Mini, 1 Frankensmith, 1 10-ER, 1 Mark V Push-me-Pull-me Drillpress, SS bandsaw, belt sander, jointer, jigsaw, shaper attach, mortising attach, TS-3650 Rigid tablesaw, RAS, 6" long bed jointer, Foley/Belsaw Planer/molder/ripsaw, 1" sander, oscillating spindle/belt sander, Scroll saw, Woodmizer sawmill
- dusty
- Platinum Member
- Posts: 21530
- Joined: Wed Nov 22, 2006 6:52 am
- Location: Tucson (Wildcat Country), Arizona
My son-in-law got the Aristocrat pulled up out of the fields to the house where it can be made ready for the trip to our house. The tires are inflated and seem to be holding air. It'll soon be sitting in my drive way where it will become my obsession for the the summer.
[ATTACH]21216[/ATTACH]
[ATTACH]21216[/ATTACH]
- Attachments
-
- The Aristocrat on its own wheels (Custom).jpg (56.04 KiB) Viewed 1878 times
"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.
Dusty
Sent from my Dell XPS using Firefox.
- robinson46176
- Platinum Member
- Posts: 4182
- Joined: Mon Mar 09, 2009 9:00 pm
- Location: Central Indiana (Shelbyville)
I thought I would post this picture Dusty in case you were looking for new ideas on your camper.
[ATTACH]21280[/ATTACH]
.
[ATTACH]21280[/ATTACH]
.
- Attachments
-
- Temp camper.jpg (162.55 KiB) Viewed 1849 times
--
farmer
Francis Robinson
I did not equip with Shopsmiths in spite of the setups but because of them.
1 1988 - Mark V 510 (bought new), 4 Poly vee 1 1/8th HP Mark V's, Mark VII, 1 Mark V Mini, 1 Frankensmith, 1 10-ER, 1 Mark V Push-me-Pull-me Drillpress, SS bandsaw, belt sander, jointer, jigsaw, shaper attach, mortising attach, TS-3650 Rigid tablesaw, RAS, 6" long bed jointer, Foley/Belsaw Planer/molder/ripsaw, 1" sander, oscillating spindle/belt sander, Scroll saw, Woodmizer sawmill
farmer
Francis Robinson
I did not equip with Shopsmiths in spite of the setups but because of them.
1 1988 - Mark V 510 (bought new), 4 Poly vee 1 1/8th HP Mark V's, Mark VII, 1 Mark V Mini, 1 Frankensmith, 1 10-ER, 1 Mark V Push-me-Pull-me Drillpress, SS bandsaw, belt sander, jointer, jigsaw, shaper attach, mortising attach, TS-3650 Rigid tablesaw, RAS, 6" long bed jointer, Foley/Belsaw Planer/molder/ripsaw, 1" sander, oscillating spindle/belt sander, Scroll saw, Woodmizer sawmill
- JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Gotta love the easy motor access and around the corner 'illumination'.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
- dusty
- Platinum Member
- Posts: 21530
- Joined: Wed Nov 22, 2006 6:52 am
- Location: Tucson (Wildcat Country), Arizona
robinson46176 wrote:I thought I would post this picture Dusty in case you were looking for new ideas on your camper.
[ATTACH]21280[/ATTACH]
.
I had ruled out the idea of a generator due to lack of space but this gives me some latitude. But then what will I do with the propane tanks?
Hmmm This may be a prototype for the first motorhome.
"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.
Dusty
Sent from my Dell XPS using Firefox.
- dusty
- Platinum Member
- Posts: 21530
- Joined: Wed Nov 22, 2006 6:52 am
- Location: Tucson (Wildcat Country), Arizona
My New Distraction
I don't have the trailer yet but that is proving to be a good thing. If it was in the driveway I would probably already be cusing myself for what I had done without "planning".
I have made progress though. My daughter has helped with photos and dimensions. With that input and some help from other RV sites - I am developing a "plan" while gaining some incite into the Aristocrat design.
[ATTACH]21370[/ATTACH]
The framing for windows (front and back) comes next.
Please remember: This is all still conceptual for the moment.
I have made progress though. My daughter has helped with photos and dimensions. With that input and some help from other RV sites - I am developing a "plan" while gaining some incite into the Aristocrat design.
[ATTACH]21370[/ATTACH]
The framing for windows (front and back) comes next.
Please remember: This is all still conceptual for the moment.
- Attachments
-
- Aristocrat Assembly Template 2 (Custom).png (96.58 KiB) Viewed 1725 times
"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.
Dusty
Sent from my Dell XPS using Firefox.