I BOX review of sorts (spoiler alert)

Create a review for a woodworking tool that you are familiar with (Shopsmith brand or Non-Shopsmith) or just post your opinion on a specific tool. Head to head comparisons welcome too.

Moderator: admin

Post Reply
User avatar
JPG
Platinum Member
Posts: 35600
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Post by JPG »

[quote="algale"]Sorry for the confusion]
I was referring to flat head screws bottoming out as the common thing. Those screws were the ones that secured the miter gauge 'post' block to the face of the miter gauge.
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Top
User avatar
algale
Platinum Member
Posts: 4841
Joined: Thu Nov 04, 2010 8:13 am

De Verdict Is In

Post by algale »

And the miter bar for my newish v120 is NOT countersunk! Now, to seek replacement or attempt a repair on my own.....
Gale's Law: The bigger the woodworking project, the less the mistakes show in any photo taken far enough away to show the entire project!

Top
User avatar
fredsheldon
Platinum Member
Posts: 1175
Joined: Tue Jan 17, 2012 1:31 pm
Location: The Woodlands, Texas

Post by fredsheldon »

Nope, holes not countersunk in the latest version being shipped out from SS. A little drilling and all is well.

It took me over 2 hours to figure out how to get around that mounting screw head before I finally gave up and found it doesn't really make any difference. Here is my very first attempt at using my 6 inch stacked dado to cut some box joints. I think I'm ready for the big time. I'm going to build a box for all my scrap wood.

[ATTACH]21747[/ATTACH]
Attachments
2013-06-05_19-57-49_788 (800x450).jpg
2013-06-05_19-57-49_788 (800x450).jpg (223.2 KiB) Viewed 12567 times
Fred Sheldon
The Woodlands, Tx
'52 10ER # 60869 (restored in 2012, used as a dedicated drill press), '52 10ER # 88712 (restored 01/2013), 52 10ER # 71368 (in process of restoring), '83 500 Shorty with OPR installed, '83 520 PowerPro with Lift Assist, 6" Joiner, 6" Belt Sander, 18" Jig Saw, 11" Band Saw, 12" ProPlaner, SS Crosscut Table. SS Dust Collector, Hitachi 1/2" router, Work Sharp 3000 with all attachement, Nova G3 Chuck, Universal Tool Rest, Appalachia Tool Works Sled.
Top
User avatar
reible
Platinum Member
Posts: 11283
Joined: Thu Jul 20, 2006 12:08 pm
Location: Aurora, IL

Post by reible »

My V120 arrived later this afternoon. I checked and could not snug up the miter bar. Again the holes were not countersunk.

You can read more about that here:

https://forum.shopsmith.com/viewtopic.php?t=12840

Ed
Top
moiramph
Gold Member
Posts: 33
Joined: Thu Jul 20, 2006 8:25 am
Location: Dayton, Ohio

IBox Issue

Post by moiramph »

We have found that there is an interference issue when mounting the rear blade guard, we are supplying a brass plated T-bolt to replace the left rear hex bolt. This t-bolt will arrive in the about 10 days and they will be sent to all that had previously purchased the Shopsmith IBOX. I will be included in all future Shopsmith IBoxes also.
Top
User avatar
reible
Platinum Member
Posts: 11283
Joined: Thu Jul 20, 2006 12:08 pm
Location: Aurora, IL

Post by reible »

moiramph wrote:We have found that there is an interference issue when mounting the rear blade guard, we are supplying a brass plated T-bolt to replace the left rear hex bolt. This t-bolt will arrive in the about 10 days and they will be sent to all that had previously purchased the Shopsmith IBOX. I will be included in all future Shopsmith IBoxes also.
Hi,

Perhaps it might be worth while to introduce yourself to us?

I believe you to be a representative of Incra but some here might like to be reassured if you don't mind.

BTW I think it is great to have you here, welcome!

Ed
Top
User avatar
joshh
Platinum Member
Posts: 723
Joined: Tue Jan 08, 2013 8:53 pm
Location: Dallas / Fort Worth, Texas

Post by joshh »

moiramph wrote:This t-bolt will arrive in the about 10 days and they will be sent to all that had previously purchased the Shopsmith IBOX.

Nice to know there are still companies who value customer service more than a quick buck. Shopsmith is another example of how good customer service earns you a lifelong customer. Lifelong bucks > quick buck (unless you sell garbage and would lose the customer after one sale anyway). :D
Top
moiramph
Gold Member
Posts: 33
Joined: Thu Jul 20, 2006 8:25 am
Location: Dayton, Ohio

Post by moiramph »

reible wrote:Hi,

Perhaps it might be worth while to introduce yourself to us?

I believe you to be a representative of Incra but some here might like to be reassured if you don't mind.

BTW I think it is great to have you here, welcome!

Ed
Ed - No, I do not work for Incra, but for Shopsmith.

Thanks for the welcome!
Top
User avatar
reible
Platinum Member
Posts: 11283
Joined: Thu Jul 20, 2006 12:08 pm
Location: Aurora, IL

Post by reible »

moiramph wrote:Ed - No, I do not work for Incra, but for Shopsmith.

Thanks for the welcome!

Thank you for clearing that up. I had invited a Incra person to join in our conversation so I thought you might have been him.

It is nice to have another shopsmith person posting here again, be it your job or common interest in shopsmith we value it.

BTW Mark from Incra indicated they had a thin head bolt coming my way as a solution for rear guard issue. It looks like shopsmith is going a different way? Or are the two the same solution?

Ed
Top
User avatar
JPG
Platinum Member
Posts: 35600
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Post by JPG »

moiramph wrote:We have found that there is an interference issue when mounting the rear blade guard, we are supplying a brass plated T-bolt to replace the left rear hex bolt. This t-bolt will arrive in the about 10 days and they will be sent to all that had previously purchased the Shopsmith IBOX. I will be included in all future Shopsmith IBoxes also.

Thank You for your 'timely authoritative' posts.:)

Does that mean shipping costs will be increased?:D

And thank RLF(personal and et al) for continuing to have a proper attitude!:cool:
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Top
Post Reply

Return to “Woodworking Tool Review”