Gambling hardware style

This is a forum for intermediate to advanced woodworkers. Show off your projects or share your ideas.

Moderator: admin

Post Reply
User avatar
reible
Platinum Member
Posts: 11283
Joined: Thu Jul 20, 2006 12:08 pm
Location: Aurora, IL

Gambling hardware style

Post by reible »

I'm at the hardware store looking for some hardware. I need 8 of these, the cost off the rack is $.79 ea.

[ATTACH]23778[/ATTACH]

Simple math I go with 8 * 8 or some where near $6.40 minus... well how ever you do your math we are talking $6.32. But then I spot this grab bag of hardware and yes I can see at least some of the exact same parts in the bag.

[ATTACH]23779[/ATTACH]

The bag is $5 but will there be 8 of the parts I need? If say there are only 7 then if I take this bag home I will have to do a return trip to pick up another one. Well the drive will cost more then the possible saving but I'm not in a hurry for the parts so I could combine trips at another time.....

That is a 5 pound or so bag so at a $1 a pound this is still cheap hardware.

So do I gamble that I will find 8 of the parts I need or just buy the for sure number off the rack. As you can tell from the picture I went with the bag.

Was it a good gamble?

I'm going to open the bag and see, check back later for the results.

Ed
Attachments
IMG_0627sc.jpg
IMG_0627sc.jpg (39.77 KiB) Viewed 1568 times
IMG_0497msc.jpg
IMG_0497msc.jpg (46.8 KiB) Viewed 1569 times
User avatar
JPG
Platinum Member
Posts: 35600
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Post by JPG »

IIWM, I would buy both the bag and how ever many I think it is 'short' of 8.

Save my receipt and return any excess up to the number of contingency units purchased.



Assumes returns of the standard items are 'aok'.
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10
E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
User avatar
robinson46176
Platinum Member
Posts: 4182
Joined: Mon Mar 09, 2009 9:00 pm
Location: Central Indiana (Shelbyville)

Post by robinson46176 »

I would have bought the 8 and the bag... :D


.
--
farmer
Francis Robinson
I did not equip with Shopsmiths in spite of the setups but because of them.
1 1988 - Mark V 510 (bought new), 4 Poly vee 1 1/8th HP Mark V's, Mark VII, 1 Mark V Mini, 1 Frankensmith, 1 10-ER, 1 Mark V Push-me-Pull-me Drillpress, SS bandsaw, belt sander, jointer, jigsaw, shaper attach, mortising attach, TS-3650 Rigid tablesaw, RAS, 6" long bed jointer, Foley/Belsaw Planer/molder/ripsaw, 1" sander, oscillating spindle/belt sander, Scroll saw, Woodmizer sawmill
User avatar
reible
Platinum Member
Posts: 11283
Joined: Thu Jul 20, 2006 12:08 pm
Location: Aurora, IL

Post by reible »

It sounds like you are a little off on the subject of gambling, you do have the safe bet down pat.

Ed
JPG40504 wrote:IIWM, I would buy both the bag and how ever many I think it is 'short' of 8.

Save my receipt and return any excess up to the number of contingency units purchased.



Assumes returns of the standard items are 'aok'.
User avatar
reible
Platinum Member
Posts: 11283
Joined: Thu Jul 20, 2006 12:08 pm
Location: Aurora, IL

Post by reible »

You are thinking like the old me. The new me is looking for more excitement like gambling on what is in the bag.

Ed
robinson46176 wrote:I would have bought the 8 and the bag... :D


.
User avatar
reible
Platinum Member
Posts: 11283
Joined: Thu Jul 20, 2006 12:08 pm
Location: Aurora, IL

Post by reible »

OK the bag is empty, I have pictures and counts of what was in the bag minus a few that might have found refuse on the floor under something.

All the hardware is 1/4-20. The loose washers totaled 59 pieces.

[ATTACH]23784[/ATTACH]

Nuts amounted to 56 pieces

[ATTACH]23785[/ATTACH]

The next three pictures are of bolts, they are 3" long, first fully threaded group is 10, the next group is 39 parts, and last is the group of 52 with nuts and washers.

[ATTACH]23786[/ATTACH]

[ATTACH]23787[/ATTACH]

[ATTACH]23788[/ATTACH]

Next post we will see how well I did on the hardware I needed.

Ed
Attachments
IMG_0634sc.jpg
IMG_0634sc.jpg (23.15 KiB) Viewed 1553 times
IMG_0633sc.jpg
IMG_0633sc.jpg (33.37 KiB) Viewed 1552 times
IMG_0632sc.jpg
IMG_0632sc.jpg (40.42 KiB) Viewed 1551 times
IMG_0631sc.jpg
IMG_0631sc.jpg (46.04 KiB) Viewed 1552 times
IMG_0630sc.jpg
IMG_0630sc.jpg (52.11 KiB) Viewed 1550 times
User avatar
reible
Platinum Member
Posts: 11283
Joined: Thu Jul 20, 2006 12:08 pm
Location: Aurora, IL

Post by reible »

I'm sure the excitement is building but first lets see the "other contents"

[ATTACH]23789[/ATTACH]

Some of that may turn out to useless but still....

Now for the drum roll please!!!!!!!!!!!!!!!!

[ATTACH]23790[/ATTACH]

As you can see I have the 8 I need and even a spare.

Now this is how you fill your shop with all sorts of hardware, pounds and pounds of it.

I was proud of myself for letting the other 4 bags remain in the store for someone else, got to stop hoarding the hardware deals.

Ed
Attachments
IMG_0629sc.jpg
IMG_0629sc.jpg (35.87 KiB) Viewed 1546 times
IMG_0628sc.jpg
IMG_0628sc.jpg (40.63 KiB) Viewed 1551 times
User avatar
BuckeyeDennis
Platinum Member
Posts: 3815
Joined: Tue Jul 24, 2012 10:03 pm
Location: Central Ohio

Post by BuckeyeDennis »

I've never seen such a grab bag in my neck of the woods. So just send me the leftover hardware, and I'll still give you five bucks for it! :D

The bargain bins that we do have are filled with bottom-end junk tools from China. :mad:
User avatar
danr
Gold Member
Posts: 100
Joined: Sun Nov 17, 2013 1:39 pm
Location: Longmont, Colorado

Post by danr »

Good haul!
Post Reply