XP going going

Moderator: admin

User avatar
JPG
Platinum Member
Posts: 35600
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Post by JPG »

rjent wrote:Great thread. I have been in IT for over 30 years starting out in CP/M in the 80's and working up? from there. Bill Gates really built a model that was designed to make him money, in my opinion. When he obsoleted Windows 2000 as an example, a great NT platform that was very stable, and forced XP on the market, which was just a prettier interface to 2000 he forced everyone to "upgrade" by dropping "support" (.net changes no longer being available etc), to have to buy something else yet again, from Microsoft. His whole model of business has been planned obsolescence since DOS. Now, with that said, there is a natural progression of improvement that is going to happen, these machines have become so incredible, our desktops can compete with the billion dollar Cray of just a decade or so ago in computing power. The bugaboo (technical term :)) is that the obsolescence wasn't necessary, the "improvements" could have been seamless and secure. It is all about resale and the bottom line. The other problem, and one that I had to deal with, was function in the real world. We had to develop software for the organizations we supported and the only way to do that, was to use the Microsoft platforms. That is still true today. I hope Linux eventually takes over. It is a far better OS, but less forgiving and harder to understand with it's cryptic approach of user interface. I think that will continue to change over time. I hope so!

Anyway, JMHO :)

Having traversed the early parts of that journey myself, I recall(When IBM was in the driver's seat[almost]), that backward compatibility was paramount. The 'selling points' were new function(mainly to support new hardware [disk drives] etc.)

Sadly with the micro-channel architecture decision and the IBM developed OS, Bill Gates was given a free pass to do as he saw fit with DOS and windows.

Not to find fault with Bill Gates, IBM had been doing the same for years with the main frames.

Remember the PC was a maverick operation within IBM. If the movie was accurate, the first mistake was continueing Gates rights to DOS rather than buying it outright.

Wonder how the guy that sold it to Gates feels today?(movie again).
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10
E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
User avatar
heathicus
Platinum Member
Posts: 2648
Joined: Wed Oct 22, 2008 1:02 am
Location: WhoDat Nation

Post by heathicus »

This movie?

Image

I watched it again a few months ago.
Heath
Central Louisiana
-10ER - SN 13927, Born 1949, Acquired October 2008, Restored November, 2008
-10ER - SN 35630, Born 1950, Acquired April 2009, Restored May 2009, A34 Jigsaw
-Mark V - SN 212052, Born 1986, Acquired Sept 2009, Restored March 2010, Bandsaw
-10ER - SN 39722, Born 1950, Acquired March 2011, awaiting restoration
User avatar
JPG
Platinum Member
Posts: 35600
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Post by JPG »

heathicus wrote:This movie?

Image

I watched it again a few months ago.


P.S. Also the scene where Jobs walks in to HP.

I do not recall the movie title, but maybe! Interesting meeting with bankers, dumping a prototype in the trash afterward, Gates screaming "why does it not work". As a former somewhat ducky(old time IBM folks will understand) IBMer, I was quite amused at the "Software is not important, Hardware is what counts" line in response to Gates insisting on retaining rights to DOS. IIUC CPM(and UCSD) were IBM's thinking re OS for the PC.

Pcode - Bleech!:eek:
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10
E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
User avatar
rjent
Platinum Member
Posts: 2121
Joined: Fri Mar 14, 2014 3:00 pm
Location: Hot Springs, New Mexico

Post by rjent »

JPG40504 wrote:Having traversed the early parts of that journey myself, I recall(When IBM was in the driver's seat[almost]), that backward compatibility was paramount. The 'selling points' were new function(mainly to support new hardware [disk drives] etc.)

Sadly with the micro-channel architecture decision and the IBM developed OS, Bill Gates was given a free pass to do as he saw fit with DOS and windows.

Not to find fault with Bill Gates, IBM had been doing the same for years with the main frames.

Remember the PC was a maverick operation within IBM. If the movie was accurate, the first mistake was continueing Gates rights to DOS rather than buying it outright.

Wonder how the guy that sold it to Gates feels today?(movie again).
Bill Gates and Microsoft developed very little in actuality. Dos was an OS that was bought from a geek in Washington state, BASIC was a public domain language developed by a educational institution, Visual Foxpro and the Visual studio components were rehashes of mostly known public domain languages (DBase, Foxpro's roots, was another public domain language that was "stolen") Excel was a rewrite of the ever popular Visicalc (I even wrote a SS program using a compiled basic just for the hell of it :) ), and I could go on. The registry, mentioned before, was developed to implement more control over proprietary software. etc etc.

Bill was a pitch man that makes Barnum look like Mother Teresa :D
Dick
1965 Mark VII S/N 407684
1951 10 ER S/N ER 44570 -- Reborn 9/16/14
1950 10 ER S/N ER 33479 Reborn July 2016
1950 10 ER S/N ER 39671
1951 jigsaw X 2
1951 !0 ER #3 in rebuild
500, Jointer, Bsaw, Bsander, Planer
2014 Mark 7 W/Lift assist - 14 4" Jointer - DC3300
And a plethora of small stuff .....

"The trouble with quotes on the Internet is that you can never know if they are genuine." - Benjamin Franklin
User avatar
heathicus
Platinum Member
Posts: 2648
Joined: Wed Oct 22, 2008 1:02 am
Location: WhoDat Nation

Post by heathicus »

Here's a few clips from Pirates Of Silicon Valley:

The Microsoft deal with IBM
http://www.youtube.com/watch?v=9nfgRf2A0Tc

Steve Jobs taking the GUI concept from Xerox
http://www.youtube.com/watch?v=2u70CgBr-OI

Gates and the Microsoft crew visits Apple and Steve Jobs
http://www.youtube.com/watch?v=yG4DvM0wxdk

It's a very dramatized and condensed movie. And it's kind of cheesy, but I still find it very enjoyable. Maybe only because I'm into this kind of thing. If you haven't seen it, check it out.

And just because I stumbled onto it looking for those clips, here's a bonus video demonstration of the Xerox Star operating system that Steve Jobs stole from and which Bill Gates stole from him.
http://www.youtube.com/watch?v=Cn4vC80Pv6Q
Heath
Central Louisiana
-10ER - SN 13927, Born 1949, Acquired October 2008, Restored November, 2008
-10ER - SN 35630, Born 1950, Acquired April 2009, Restored May 2009, A34 Jigsaw
-Mark V - SN 212052, Born 1986, Acquired Sept 2009, Restored March 2010, Bandsaw
-10ER - SN 39722, Born 1950, Acquired March 2011, awaiting restoration
User avatar
JPG
Platinum Member
Posts: 35600
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Post by JPG »

rjent wrote:Bill Gates and Microsoft developed very little in actuality. Dos was an OS that was bought from a geek in Washington state, BASIC was a public domain language developed by a educational institution, Visual Foxpro and the Visual studio components were rehashes of mostly known public domain languages (DBase, Foxpro's roots, was another public domain language that was "stolen") Excel was a rewrite of the ever popular Visicalc (I even wrote a SS program using a compiled basic just for the hell of it :) ), and I could go on. The registry, mentioned before, was developed to implement more control over proprietary software. etc etc.

Bill was a pitch man that makes Barnum look like Mother Teresa :D
I have several that I run(and modify/compile) often(one a pos terminal runs 24/7).

Yes the hardware is old also!

I never learned/obtained visual basic so windows is not an available path.

I need XP to continue to run "msdos" rather than "cmd".
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10
E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
User avatar
rjent
Platinum Member
Posts: 2121
Joined: Fri Mar 14, 2014 3:00 pm
Location: Hot Springs, New Mexico

Post by rjent »

JPG40504 wrote:I need XP to continue to run "msdos" rather than "cmd".
I hear you brother, and you are not alone. MS has wanted to get rid of the Command Prompt for a long time .... :rolleyes:

I have a MSDOS machine, a TRSDOS machine, and a CP/M machine running and use on occasion ..... just because I can! :D
Dick
1965 Mark VII S/N 407684
1951 10 ER S/N ER 44570 -- Reborn 9/16/14
1950 10 ER S/N ER 33479 Reborn July 2016
1950 10 ER S/N ER 39671
1951 jigsaw X 2
1951 !0 ER #3 in rebuild
500, Jointer, Bsaw, Bsander, Planer
2014 Mark 7 W/Lift assist - 14 4" Jointer - DC3300
And a plethora of small stuff .....

"The trouble with quotes on the Internet is that you can never know if they are genuine." - Benjamin Franklin
garys
Platinum Member
Posts: 2075
Joined: Wed Mar 02, 2011 12:16 am
Location: Bismarck, ND

Post by garys »

Just another good reason to use Linux instead of Window. Linux has DOS emulation so it can run your DOS programs.
User avatar
lightnin
Platinum Member
Posts: 582
Joined: Wed Mar 28, 2012 3:39 am
Location: North West Indiana

Post by lightnin »

A big problem I've had is updated drivers for the new OS
I quit buying anything HP they never make updated drivers they want you to buy a new printer.

I admit it's been years since I've shopped for printers when I did last it was because a new windows would not run my HP printer.
I googled "printer driver update" I found Epson had a lot of them so I choose them with hopes they would have an update when the time came.
Bruce

I didn't know what a Shopsmith was...
Three days later I owned one...
One week later I was rebuilding one...
Four months later I owned two....
Ok Ok, I'm up to four now...
User avatar
rjent
Platinum Member
Posts: 2121
Joined: Fri Mar 14, 2014 3:00 pm
Location: Hot Springs, New Mexico

Post by rjent »

garys wrote:Just another good reason to use Linux instead of Window. Linux has DOS emulation so it can run your DOS programs.
You are right, but there are some problems I won't go into. Some legal implications, some functional. As an IT shop and software developer, I was really forced to run Windows platforms for many of my customers. My development language(s), many times were the culprit for that need. Now that I am retired from that nightmare LOL I will definitely change platforms. Like I said, I have many OS's and hardware platforms to work with and I can develop my own SW. Bye Bye Bill! :D
Dick
1965 Mark VII S/N 407684
1951 10 ER S/N ER 44570 -- Reborn 9/16/14
1950 10 ER S/N ER 33479 Reborn July 2016
1950 10 ER S/N ER 39671
1951 jigsaw X 2
1951 !0 ER #3 in rebuild
500, Jointer, Bsaw, Bsander, Planer
2014 Mark 7 W/Lift assist - 14 4" Jointer - DC3300
And a plethora of small stuff .....

"The trouble with quotes on the Internet is that you can never know if they are genuine." - Benjamin Franklin
Post Reply