Can anyone recommend a few good books on the subject of Lathe Work? Thank you.
Michael Stoic
10ER, Boston
Good Books on Lathe Turning
Moderator: admin
Michael
I started turning about 3 years ago and was told that "Turning Wood" with Richard Raffan was a good recommended read. He is a well known wood turner and this particular book was first published in 1985 and I felt it covered everything related to wood turning. I checked half.com and noticed that there are some available in the $8-9 range. I am sure there are other good books out there as well. Hope this helps.
I started turning about 3 years ago and was told that "Turning Wood" with Richard Raffan was a good recommended read. He is a well known wood turner and this particular book was first published in 1985 and I felt it covered everything related to wood turning. I checked half.com and noticed that there are some available in the $8-9 range. I am sure there are other good books out there as well. Hope this helps.
Ron from Lewisburg, TN
-
bostonmish
- Bronze Member
- Posts: 2
- Joined: Wed May 07, 2008 9:33 pm
-
sandyj
- Gold Member
- Posts: 75
- Joined: Mon Feb 18, 2008 6:03 pm
- Location: Auckland, New Zealand
- Contact:
free e-book on turning
1960 SS500, Magna Jointer & Dado. Hailing from New Zealand
-
woodburner
- Gold Member
- Posts: 498
- Joined: Fri Jul 21, 2006 2:35 am
- Location: Visalia, CA
- Contact:
Go to these following websites and you will find that they offer woodturning books and videos/DVD's on just about every subject of woodturning.
http://www.packardwoodworks.com
http://www.woodturnerscatalog.com
Lots of choose from. I will like to suggest you purchase a book for beginners (if you are one). The catalogs have descriptions about what each book is for and whether it is for beginners, intermediate, etc. Some of them are all around woodturning books and others are for a specific type of woodturning.
Jimmy Clewes and Richard Raffan are both authors I will highly recommend. I have taken classes from both of them and they know their stuff.
Good luck and have fun woodturning.
http://www.packardwoodworks.com
http://www.woodturnerscatalog.com
Lots of choose from. I will like to suggest you purchase a book for beginners (if you are one). The catalogs have descriptions about what each book is for and whether it is for beginners, intermediate, etc. Some of them are all around woodturning books and others are for a specific type of woodturning.
Jimmy Clewes and Richard Raffan are both authors I will highly recommend. I have taken classes from both of them and they know their stuff.
Good luck and have fun woodturning.
Sawdust & Shavings,
Woodburner:o
Woodburner:o