HF Dust Collector

Create a review for a woodworking tool that you are familiar with (Shopsmith brand or Non-Shopsmith) or just post your opinion on a specific tool. Head to head comparisons welcome too.

Moderator: admin

Post Reply
User avatar
JPG
Platinum Member
Posts: 35598
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Post by JPG »

rbursek wrote:In retro spec, if the shop does not leak in the amount of CFM of air going out, you will pull a negative pressure in the shop only to what is leaking in and what the DC can "pull" without "cavitating" air, in the blower/fan wheel, (just turning and not moving air or only what is coming in, plus what negative pressure it is capable of). Like my dad, sealed/caulked up the whole house that they bought used, went to light a fire at TG in the fire place, no air in, no air out, filled the house with smoke!!! Works great after I told him to crack a window open!!!
JPG, bet you did not think I knew those big words and what they ment!!
What big words?:D

Now antidisestablishmentarianism is a 'big' word.;)

BTW $.013994 is just under 1.4 cents.:rolleyes:
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Top
User avatar
"Wild Bad Bob"
Platinum Member
Posts: 1065
Joined: Fri Mar 28, 2014 2:03 pm
Location: Germantown, Wi

Post by "Wild Bad Bob" »

BTW $.013994 is just under 1.4 cents
I meant just under $00.14 a KWH, 14 cents, 1 dime and 4 pennies, or 2 nickels and 4 pennies, or 1 nickel and 9 pennies, or just 14 pennies and change back!!!
As always right so I missed a decimal, I bet cheaper then the TVA????!!!
Measure once, cut as many times as needed to get it right! Bob
56/57 Greenie with jointer, 85 Mark V with band saw, 63 Goldie with jointer, 3 ER 10s, 1951 vintage, Hernia from the Er 10s, Tool Shop SS clone 6" jointer, and 6" belt sander, Delta 10" TS, Buffalo 6" jointer, Craftsman 12" BS, 10" Ryobi planer. Compound Miter, and misc.
Top
User avatar
"Wild Bad Bob"
Platinum Member
Posts: 1065
Joined: Fri Mar 28, 2014 2:03 pm
Location: Germantown, Wi

Post by "Wild Bad Bob" »

JPG, seriously, what do you pay a KWH and what is the major source? Hydro or fossil, no nukes down that away that I know of?
Measure once, cut as many times as needed to get it right! Bob
56/57 Greenie with jointer, 85 Mark V with band saw, 63 Goldie with jointer, 3 ER 10s, 1951 vintage, Hernia from the Er 10s, Tool Shop SS clone 6" jointer, and 6" belt sander, Delta 10" TS, Buffalo 6" jointer, Craftsman 12" BS, 10" Ryobi planer. Compound Miter, and misc.
Top
User avatar
"Wild Bad Bob"
Platinum Member
Posts: 1065
Joined: Fri Mar 28, 2014 2:03 pm
Location: Germantown, Wi

Post by "Wild Bad Bob" »

antidisestablishmentarianism
Just allot of words and syllables combined, like Supercalifragilisticexpialidocious, are you a Mary Poppins?? I can goggle too my KY friend!!
Measure once, cut as many times as needed to get it right! Bob
56/57 Greenie with jointer, 85 Mark V with band saw, 63 Goldie with jointer, 3 ER 10s, 1951 vintage, Hernia from the Er 10s, Tool Shop SS clone 6" jointer, and 6" belt sander, Delta 10" TS, Buffalo 6" jointer, Craftsman 12" BS, 10" Ryobi planer. Compound Miter, and misc.
Top
User avatar
JPG
Platinum Member
Posts: 35598
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Post by JPG »

rbursek wrote:antidisestablishmentarianism
Just allot of words and syllables combined, like Supercalifragilisticexpialidocious, are you a Mary Poppins?? I can goggle too my KY friend!!
I did not google it!;) I remember when a kid won the national spelling bee with that word. Never forgot it. A perfect example of phonetic spelling!
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Top
User avatar
"Wild Bad Bob"
Platinum Member
Posts: 1065
Joined: Fri Mar 28, 2014 2:03 pm
Location: Germantown, Wi

Post by "Wild Bad Bob" »

Kudos on that!! Nuns did that phonics thing could not get it!!! Not a great speller, great vocabulary though!!
Measure once, cut as many times as needed to get it right! Bob
56/57 Greenie with jointer, 85 Mark V with band saw, 63 Goldie with jointer, 3 ER 10s, 1951 vintage, Hernia from the Er 10s, Tool Shop SS clone 6" jointer, and 6" belt sander, Delta 10" TS, Buffalo 6" jointer, Craftsman 12" BS, 10" Ryobi planer. Compound Miter, and misc.
Top
User avatar
"Wild Bad Bob"
Platinum Member
Posts: 1065
Joined: Fri Mar 28, 2014 2:03 pm
Location: Germantown, Wi

Post by "Wild Bad Bob" »

JPG, Again I ask?
, seriously, what do you pay a KWH and what is the major source? Hydro or fossil, no nukes down that away that I know of?
Measure once, cut as many times as needed to get it right! Bob
56/57 Greenie with jointer, 85 Mark V with band saw, 63 Goldie with jointer, 3 ER 10s, 1951 vintage, Hernia from the Er 10s, Tool Shop SS clone 6" jointer, and 6" belt sander, Delta 10" TS, Buffalo 6" jointer, Craftsman 12" BS, 10" Ryobi planer. Compound Miter, and misc.
Top
charlese
Platinum Member
Posts: 7501
Joined: Fri Dec 08, 2006 10:46 pm
Location: Lancaster, CA

Post by charlese »

rbursek wrote:JPG, Again I ask?
, seriously, what do you pay a KWH and what is the major source? Hydro or fossil, no nukes down that away that I know of?
I fail to understand how this latest discussion has to do with HF dust collector.
Octogenarian's have an earned right to be a curmudgeon.
Chuck in Lancaster, CA
Top
Gene Howe
Platinum Member
Posts: 3219
Joined: Wed Jul 26, 2006 7:52 pm
Location: Snowflake, AZ

Post by Gene Howe »

It's a stretch.
charlese wrote:I fail to understand how this latest discussion has to do with HF dust collector.
Gene

'The true soldier fights not because he hates what is in front of him, but because he loves what is behind him.' G. K. Chesterton
Top
User avatar
JPG
Platinum Member
Posts: 35598
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Post by JPG »

charlese wrote:I fail to understand how this latest discussion has to do with HF dust collector.
Fear not Chuck, you are not losing it!

This tangent has zip to do with a HF dust collector.;)




Nor is this having anything to do with it.:D
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Top
Post Reply

Return to “Woodworking Tool Review”