ER 10 Bench

ERLover · Post by **ERLover** » Wed Dec 09, 2015 4:07 pm

I was reading through the ER manual over at Vintage Machinery, it sez in there when unpacking your ER, there is an envelope with plans to make a bench for it if you dont want to buy the SS leg panels. Anyone here got a copy to post or a link to it?
TIA,
Mike

jsburger · Post by **jsburger** » Wed Dec 09, 2015 5:36 pm

ERLover wrote:I was reading through the ER manual over at Vintage Machinery, it sez in there when unpacking your ER, there is an envelope with plans to make a bench for it if you dont want to buy the SS leg panels. Anyone here got a copy to post or a link to it?
TIA,
Mike

Here you go Mike. I have the original and it is a true blue print. I had to save it in black and white so it was small enough to upload here. If you want a color copy PM me with your email address and I will send it to you. Even grey scale looks much better than black and white but it was too large also.

One of the 10ERs I have here is on a bench made from these plans.

ERLover · Post by **ERLover** » Wed Dec 09, 2015 10:11 pm

I had a feeling it would be you, ya know why, on VM on the ER there was your name for some info, a true lover of these machines, thanks JB
Mike

ERLover · Post by **ERLover** » Wed Dec 09, 2015 10:13 pm

John it was turned 90*, I will Pm you with my email

dusty · Post by **dusty** » Thu Dec 10, 2015 6:40 am

ERLover wrote:John it was turned 90*, I will Pm you with my email

You can rotate it yourself. Can't you. Click View (upper left hand corner) and go from there.

ERLover · Post by **ERLover** » Thu Dec 10, 2015 9:13 am

No such thing that I can find Dusty, but I am better at WW then computing.

jsburger · Post by **jsburger** » Thu Dec 10, 2015 1:00 pm

ERLover wrote:No such thing that I can find Dusty, but I am better at WW then computing.

Sure you can. Open in Adobe Acrobat and click on menu item View. The first item in the drop down is "Rotate View. Of course then it will also rotate the second page which you don't want.

Why do you want it rotated? If you do it will be almost half the size of the original. If you print that PDF on a double sided printer it will look just like the original.

JPG · Post by **JPG** » Thu Dec 10, 2015 1:06 pm

jsburger wrote:
ERLover wrote:No such thing that I can find Dusty, but I am better at WW then computing.
Sure you can. Open in Adobe Acrobat and click on menu item View. The first item in the drop down is "Rotate View. Of course then it will also rotate the second page which you don't want.

Why do you want it rotated? If you do it will be almost half the size of the original. If you print that PDF on a double sided printer it will look just like the original.

Make sure your ink cartridge is 'full'.

jsburger · Post by **jsburger** » Thu Dec 10, 2015 1:09 pm

JPG wrote:
jsburger wrote:
ERLover wrote:No such thing that I can find Dusty, but I am better at WW then computing.
Sure you can. Open in Adobe Acrobat and click on menu item View. The first item in the drop down is "Rotate View. Of course then it will also rotate the second page which you don't want.

Why do you want it rotated? If you do it will be almost half the size of the original. If you print that PDF on a double sided printer it will look just like the original.

Make sure your ink cartridge is 'full'.

Yes, that would be prudent.

JPG · Post by **JPG** » Thu Dec 10, 2015 1:32 pm

Maybe this will help.

: ER BENCH AB.jpg (745.77 KiB) Viewed 3447 times

Overlook the slight misalignment(done blind!).

I have not looked close enough, but be aware dimensional lumber 2 x 6 'then' was 1 5/8 x 5 5/8 (IIRC)

: ER BENCH CD.jpg (668.82 KiB) Viewed 3433 times

The second dimension from the 'bottom' is 31, not 3.

Shopsmith Forums

ER 10 Bench

ER 10 Bench

Re: ER 10 Bench

Re: ER 10 Bench

Re: ER 10 Bench

Re: ER 10 Bench

Re: ER 10 Bench

Re: ER 10 Bench

Re: ER 10 Bench

Re: ER 10 Bench

Re: ER 10 Bench