I got this thing basically free and I don't think it was ever used. It's like it was partially assembled then put away. Anyway, the aluminum has this salty looking stuff that will wipe off with your finger and I have no clue what it is.
Thoughts?
Strip Sander find
Moderator: admin
Strip Sander find
- Attachments
-
- IMG_20160521_203422.jpg (188.81 KiB) Viewed 11281 times
-
- IMG_20160521_203445.jpg (338.56 KiB) Viewed 11281 times
Re: Strip Sander find
it might be mold
I hope I am wrong
I hope I am wrong
Re: Strip Sander find
It is corrosion. Aluminum oxide.
Gale's Law: The bigger the woodworking project, the less the mistakes show in any photo taken far enough away to show the entire project!
Re: Strip Sander find
Anything I need to do other then wipe and polish?
-
JPG
- Platinum Member
- Posts: 35457
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Strip Sander find
Washing comes to mind.ibskot wrote:Anything I need to do other then wipe and polish?
Regardless make sure to salvage the idler pulleys even if you have to replace the bearings. They do not make em any more and the ones today are not very good.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Re: Strip Sander find
When I bought a 510 for my daughter the main table and the other tables had the same spalting. My wife told me that one of her homemaking shows suggested vinegar and water, strong on the vinegar. It washed the white stuff off but I still put a coat of clear lacquer on the bottoms of the tables just in case.
Bill V
Bill V
-
ERLover
- Platinum Member
- Posts: 3914
- Joined: Mon Aug 31, 2015 10:19 pm
- Location: Greenie and Goldie Country not to metion the WI Badgers!
Re: Strip Sander find
It is not Mold, mold needs a organic matter to live on.
KNOWLEDGE AND EXPERIENCE EQUALS WISDOM. Albert Einstein
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
Re: Strip Sander find
Any idea what causes this?
Re: Strip Sander find
What caused your is hard to tell but salt water or spray or ???? having to do with any basic salts will do it.ibskot wrote:Any idea what causes this?
As an example some many years ago I had hurt a foot and took an aluminum pan that my wife had left laying around, it was slightly used but in excellent shape. I added Epson salt warm water and proceeded to soak my foot. I noticed some water on the floor after I was finished, about 20 minute or so of soak time. When I picked up the pan it was leaking in several places. That was that, scratch one pan. And yes it happen that fast. When it was rinsed and dry it had that some look as your table does.
Ed
{Knight of the Shopsmith} [Hero's don't wear capes, they wear dog tags]
-
ChrisNeilan
- Platinum Member
- Posts: 1462
- Joined: Sun Oct 27, 2013 5:30 pm
- Location: Waterford, Connecticut
- Contact:
Re: Strip Sander find
So was it the foot or the salt that ate the pan?reible wrote:What caused your is hard to tell but salt water or spray or ???? having to do with any basic salts will do it.ibskot wrote:Any idea what causes this?
As an example some many years ago I had hurt a foot and took an aluminum pan that my wife had left laying around, it was slightly used but in excellent shape. I added Epson salt warm water and proceeded to soak my foot. I noticed some water on the floor after I was finished, about 20 minute or so of soak time. When I picked up the pan it was leaking in several places. That was that, scratch one pan. And yes it happen that fast. When it was rinsed and dry it had that some look as your table does.
Ed