I have 3-4 of them and inserts, I am not going to use them for shaping, I use the inserts on my Er dedicated Drill Presses under my 3/4" BB Plywood sacrificial base I lay on the table just in case I go through it.
But looking for any ideas what I could use the fences for? No I know and I dont use the Er for shaping mode. I dont do the Ebay thing, and am not trying to sell them here under the MS radar with this Thread, even though being ER stuff, I would have a case.
Thoughts??
Er Shaper Fences
Moderator: admin
-
ERLover
- Platinum Member
- Posts: 3914
- Joined: Mon Aug 31, 2015 10:19 pm
- Location: Greenie and Goldie Country not to metion the WI Badgers!
Er Shaper Fences
KNOWLEDGE AND EXPERIENCE EQUALS WISDOM. Albert Einstein
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
-
JPG
- Platinum Member
- Posts: 35599
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Er Shaper Fences
The 'shaper' fence or the 'shaper/jointer' fence?
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Re: Er Shaper Fences
There is a difference?JPG wrote:The 'shaper' fence or the 'shaper/jointer' fence?
John & Mary Burger
Eagle's Lair Woodshop
Hooper, UT
Eagle's Lair Woodshop
Hooper, UT
-
JPG
- Platinum Member
- Posts: 35599
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Er Shaper Fences
The 'shaper jointer' fence mounts into the insert hole.jsburger wrote:There is a difference?JPG wrote:The 'shaper' fence or the 'shaper/jointer' fence?
The shaper fence clamps to the front and rear of the table - same hardware as the Mark 5/V500 version.
It is unclear to me when the shaper fence was created, but IIUC it fits both the 10 and the Mark.
Not sure which 'inserts' he is referring to.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
-
ERLover
- Platinum Member
- Posts: 3914
- Joined: Mon Aug 31, 2015 10:19 pm
- Location: Greenie and Goldie Country not to metion the WI Badgers!
Re: Er Shaper Fences
Da, the blind man can see, I did NOT know there was a difference 
, I will have look that up, scrutinize them, and get back, but no tonight, the latest ER one had the 2 pins about 2" long and threaded at one end, I think I have 1 other 1 here at moms, the other 1 or 2 is at home in Atown and I wont be up there for 2 weeks, dont remember any pins with those.
Of course pics will be included
Thanks for setting me kinda straight
, I will have look that up, scrutinize them, and get back, but no tonight, the latest ER one had the 2 pins about 2" long and threaded at one end, I think I have 1 other 1 here at moms, the other 1 or 2 is at home in Atown and I wont be up there for 2 weeks, dont remember any pins with those.Of course pics will be included
Thanks for setting me kinda straight
KNOWLEDGE AND EXPERIENCE EQUALS WISDOM. Albert Einstein
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
-
ERLover
- Platinum Member
- Posts: 3914
- Joined: Mon Aug 31, 2015 10:19 pm
- Location: Greenie and Goldie Country not to metion the WI Badgers!
Re: Er Shaper Fences
I am starting to feel like Farmer and some of you other Depression Babies, threw nothing away in case you need it, but can never find it when you do, because it is buried under all the other junk, then to find out it will not work, adapt anyway 
KNOWLEDGE AND EXPERIENCE EQUALS WISDOM. Albert Einstein
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
Re: Er Shaper Fences
My 1953 10ER accessories catalog only shows the "shaper/jointer" fence. The MK 5/V came out in 53 so there must have been some overlap in sales. The fact that the MK 5/V shaper fence fits the 10ER is the result of the width of the two tables being the same I would guess. I have never seen any literature that showed the MK 5/V shaper fence was ever sold as a 10ER accessory.JPG wrote:The 'shaper jointer' fence mounts into the insert hole.jsburger wrote:There is a difference?JPG wrote:The 'shaper' fence or the 'shaper/jointer' fence?
The shaper fence clamps to the front and rear of the table - same hardware as the Mark 5/V500 version.
It is unclear to me when the shaper fence was created, but IIUC it fits both the 10 and the Mark.
Not sure which 'inserts' he is referring to.
Of course that doesn't mean someone might have bought one for their 10ER if they fit. So your question is a legitimate one.
John & Mary Burger
Eagle's Lair Woodshop
Hooper, UT
Eagle's Lair Woodshop
Hooper, UT
-
ERLover
- Platinum Member
- Posts: 3914
- Joined: Mon Aug 31, 2015 10:19 pm
- Location: Greenie and Goldie Country not to metion the WI Badgers!
Re: Er Shaper Fences
John thanks for the info, I dont know yet till I look at them here and in Atown. Just know the one I got Saturday with the ER has the 2 pegs, I just assumed the other ones where shaper fence, but now that I think about it, one came with a jointer head, and had a fence that "looked like" a shaper fence, but I know that one is in Atown and wont be up there for 2 weeks.
KNOWLEDGE AND EXPERIENCE EQUALS WISDOM. Albert Einstein
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
-
JPG
- Platinum Member
- Posts: 35599
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Er Shaper Fences
The 2.5" head is for the '10' shaper jointer 'fence' that attaches at the table insert 'hole'.
The Mark 5 table is 1" 'deeper' than the 10.
My shaper fence is buried, but one end is adjustable sufficiently to accommodate that 1" difference.
The Mark 5 table is 1" 'deeper' than the 10.
My shaper fence is buried, but one end is adjustable sufficiently to accommodate that 1" difference.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Re: Er Shaper Fences
- shaper on mark V.png (136.71 KiB) Viewed 2406 times
- shaper ss 10er.png (167.08 KiB) Viewed 2406 times