I have 2 12" sanding disc from the last 2 SS CL recuses, one from a 51 ER, Aluminum, with the old Garnet sand paper on it. They other a Steel one from the Grayling, with a self adhesive backing paper. I put both out in the summer sun today for a couple hours, then the sanding sheet peeled right off, to see the glue mess on the plate surface, steel one was pretty clean, but the old add the adhesive to the Aluminum one was bad . I put a sheet of news paper on both, and I have Naphtha, Mineral Spirits and DN Alcohol in little squirt bottles. I saturated the news paper with MS since it has the slowest evap rate of the 3,
I let it sit for an hour and added some more to keep it saturated. A hour the same, 30 minutes later wiped them off with the news paper and got 50% if it off, then just took a Putty Knife and the rest cane off EASY, then just did a wipe 2 times with a rag with some MS on it to get rid of any tackiness.
I hope this helps?
Moderator: admin
-
ERLover
- Platinum Member
- Posts: 3914
- Joined: Mon Aug 31, 2015 10:19 pm
- Location: Greenie and Goldie Country not to metion the WI Badgers!
I hope this helps?
KNOWLEDGE AND EXPERIENCE EQUALS WISDOM. Albert Einstein
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
Re: I hope this helps?
30 Helpful Items To Remove Sticky Adhesive Goo
http://tipnut.com/25-helpful-items-to-r ... esive-goo/
http://tipnut.com/25-helpful-items-to-r ... esive-goo/
Re: I hope this helps?
"I put both out in the summer sun today for a couple hours..."
How? Summer didn't start until TODAY!
And, in Wisconsin, can we REALLY call it "summer?"
(Sunday was 118, yesterday, 115, today, again, 115.)
And, I couldn't call it "summer" until today.
Just messin' with you' bro! Glad to hear you found the
right recipe.
steve
How? Summer didn't start until TODAY!
And, in Wisconsin, can we REALLY call it "summer?"
(Sunday was 118, yesterday, 115, today, again, 115.)
And, I couldn't call it "summer" until today.
Just messin' with you' bro! Glad to hear you found the
right recipe.
steve
10 ER, stripped down.
Basic 10ER, Parts machine. Will be a semi-dedicated drill-press machine.
10 ER, a "survivor" of the trailer fire, in the back yard, needing restoration. Has a Mk5 headrest. Finally, stripped down.
Numerous parts, for Model 10 stuff. Except for lower saw guard, A and B adapters, I've got it.
Looking for one more, or some 9 inch extension table raisers.
Basic 10ER, Parts machine. Will be a semi-dedicated drill-press machine.
10 ER, a "survivor" of the trailer fire, in the back yard, needing restoration. Has a Mk5 headrest. Finally, stripped down.
Numerous parts, for Model 10 stuff. Except for lower saw guard, A and B adapters, I've got it.
Looking for one more, or some 9 inch extension table raisers.
Re: I hope this helps?
Oh, "charcoal" lighter fluid works GREAT for this.
Unfortunately, works REAL BADLY for lighting charcoal.
(Unless you LIKE the taste of kerosene-cooked food.)
steve
Unfortunately, works REAL BADLY for lighting charcoal.
(Unless you LIKE the taste of kerosene-cooked food.)
steve
10 ER, stripped down.
Basic 10ER, Parts machine. Will be a semi-dedicated drill-press machine.
10 ER, a "survivor" of the trailer fire, in the back yard, needing restoration. Has a Mk5 headrest. Finally, stripped down.
Numerous parts, for Model 10 stuff. Except for lower saw guard, A and B adapters, I've got it.
Looking for one more, or some 9 inch extension table raisers.
Basic 10ER, Parts machine. Will be a semi-dedicated drill-press machine.
10 ER, a "survivor" of the trailer fire, in the back yard, needing restoration. Has a Mk5 headrest. Finally, stripped down.
Numerous parts, for Model 10 stuff. Except for lower saw guard, A and B adapters, I've got it.
Looking for one more, or some 9 inch extension table raisers.
-
ERLover
- Platinum Member
- Posts: 3914
- Joined: Mon Aug 31, 2015 10:19 pm
- Location: Greenie and Goldie Country not to metion the WI Badgers!
Re: I hope this helps?
But Skou, it is a dry heat!!!skou wrote:"I put both out in the summer sun today for a couple hours..."
How? Summer didn't start until TODAY!
And, in Wisconsin, can we REALLY call it "summer?"
(Sunday was 118, yesterday, 115, today, again, 115.)
And, I couldn't call it "summer" until today.
Just messin' with you' bro! Glad to hear you found the
right recipe.
steve
Actually perfect here today, 78*, nice breeze and low humidity. KNOWLEDGE AND EXPERIENCE EQUALS WISDOM. Albert Einstein
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
Re: I hope this helps?
Did you see the temps I posted? I lived through them!
Bro, if I could reach through the InterWab, (that
Al Gore invented,) I'd slap you with a trout.
steve
Bro, if I could reach through the InterWab, (that
Al Gore invented,) I'd slap you with a trout.
steve
10 ER, stripped down.
Basic 10ER, Parts machine. Will be a semi-dedicated drill-press machine.
10 ER, a "survivor" of the trailer fire, in the back yard, needing restoration. Has a Mk5 headrest. Finally, stripped down.
Numerous parts, for Model 10 stuff. Except for lower saw guard, A and B adapters, I've got it.
Looking for one more, or some 9 inch extension table raisers.
Basic 10ER, Parts machine. Will be a semi-dedicated drill-press machine.
10 ER, a "survivor" of the trailer fire, in the back yard, needing restoration. Has a Mk5 headrest. Finally, stripped down.
Numerous parts, for Model 10 stuff. Except for lower saw guard, A and B adapters, I've got it.
Looking for one more, or some 9 inch extension table raisers.