My Delta 36-600 TS motor today stopped starting unless you hand spin the blade and hit the start switch b4 it stops turning. I pulled this up and do not see a capacitor, I just put new brushes in it.
Opinions?
http://www.ereplacementparts.com/delta- ... _9585.html
Delta Table Saw Motor help
Moderator: admin
-
ERLover
- Platinum Member
- Posts: 3914
- Joined: Mon Aug 31, 2015 10:19 pm
- Location: Greenie and Goldie Country not to metion the WI Badgers!
Delta Table Saw Motor help
KNOWLEDGE AND EXPERIENCE EQUALS WISDOM. Albert Einstein
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
-
JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Delta Table Saw Motor help
If it has brushes, it will NOT have a capacitor.ERLover wrote:My Delta 36-600 TS motor today stopped starting unless you hand spin the blade and hit the start switch b4 it stops turning. I pulled this up and do not see a capacitor, I just put new brushes in it.
Opinions?
http://www.ereplacementparts.com/delta- ... _9585.html
You likely have a brush that is sticking(not riding the commutator) and/or a bad spot on the commutator.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
-
ERLover
- Platinum Member
- Posts: 3914
- Joined: Mon Aug 31, 2015 10:19 pm
- Location: Greenie and Goldie Country not to metion the WI Badgers!
Re: Delta Table Saw Motor help
Did now that about brush motors and capacitor one, learned some thing todayJPG wrote:If it has brushes, it will NOT have a capacitor.ERLover wrote:My Delta 36-600 TS motor today stopped starting unless you hand spin the blade and hit the start switch b4 it stops turning. I pulled this up and do not see a capacitor, I just put new brushes in it.
Opinions?
http://www.ereplacementparts.com/delta- ... _9585.html
You likely have a brush that is sticking(not riding the commutator) and/or a bad spot on the commutator.
Since I just changed the brushes, I will put my money on a stuck one. Motor still has power though when cutting. Time to maybe get the Jewelers hammer out and some light tapping, one brush was a real PITB to access, and had to turn the saw upside down besides.
THANKS
KNOWLEDGE AND EXPERIENCE EQUALS WISDOM. Albert Einstein
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
-
ERLover
- Platinum Member
- Posts: 3914
- Joined: Mon Aug 31, 2015 10:19 pm
- Location: Greenie and Goldie Country not to metion the WI Badgers!
Re: Delta Table Saw Motor help
I pulled one of the brushes today, this is a pick of it, it has less the 20 minutes run time on it, it started out from new about 3/4". I bought this saw used about 2 months ago, it ran a bit then no power, posted a thread here, and someone said chick the brushes, they still had plenty of length to them, but one was cracked and chipped lengthwise, I ordered up a new set, this is one of them. all separated and you can see the size of it. Opinions?
- Attachments
-
- index.jpg (9.95 KiB) Viewed 4810 times
KNOWLEDGE AND EXPERIENCE EQUALS WISDOM. Albert Einstein
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
-
BuckeyeDennis
- Platinum Member
- Posts: 3814
- Joined: Tue Jul 24, 2012 10:03 pm
- Location: Central Ohio
Re: Delta Table Saw Motor help
I'd open up the motor and check the condition of the commutator. Either it is carnivorous, or someone sold you junk brushes. Or maybe the new brushes were the wrong size. More pics might help.
-
ERLover
- Platinum Member
- Posts: 3914
- Joined: Mon Aug 31, 2015 10:19 pm
- Location: Greenie and Goldie Country not to metion the WI Badgers!
Re: Delta Table Saw Motor help
I got the brushes from here, but noticed arching from the motor vents below the throat plate with them.BuckeyeDennis wrote:I'd open up the motor and check the condition of the commutator. Either it is carnivorous, or someone sold you junk brushes. Or maybe the new brushes were the wrong size. More pics might help.
If the armature/commutator was bad, it should have chewed up the ones I replace, they where good except for the one that was cracked. May be one was not seated, arching and chewed up the commutator and this brush. I have not pulled that one yet, PITA to get to. Maybe tomorrow with bros help just to investigate further.
http://www.toolpartsdirect.com/saw/tabl ... t_e_pdv_c_
KNOWLEDGE AND EXPERIENCE EQUALS WISDOM. Albert Einstein
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
-
ERLover
- Platinum Member
- Posts: 3914
- Joined: Mon Aug 31, 2015 10:19 pm
- Location: Greenie and Goldie Country not to metion the WI Badgers!
Re: Delta Table Saw Motor help
I am not a motor guy, but if by all the Arching I saw did a bit of scoring to the motor shaft, and I put in new brushes just to make it run, for the next CL buyer, no way, not my integrity, I will eat it. Can afford it an my personal integrity is worth more then $150ish, that is who I am. It ran when I bought, I dont think the seller, in good faith was selling me a problem, poop happens.
KNOWLEDGE AND EXPERIENCE EQUALS WISDOM. Albert Einstein
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
-
BuckeyeDennis
- Platinum Member
- Posts: 3814
- Joined: Tue Jul 24, 2012 10:03 pm
- Location: Central Ohio
Re: Delta Table Saw Motor help
Does the motor plate show a frame size, RPM, etc.? You might be able to pick up a used motor cheap on CL or eBay.
-
ERLover
- Platinum Member
- Posts: 3914
- Joined: Mon Aug 31, 2015 10:19 pm
- Location: Greenie and Goldie Country not to metion the WI Badgers!
Re: Delta Table Saw Motor help
Special motor for it, new one is $287.BuckeyeDennis wrote:Does the motor plate show a frame size, RPM, etc.? You might be able to pick up a used motor cheap on CL or eBay.
KNOWLEDGE AND EXPERIENCE EQUALS WISDOM. Albert Einstein
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.