What Do I Need To Add Casters To Greenie?

Forum for Maintenance and Repair topics. Feel free to ask questions or contribute.

Moderator: admin

ERLover
Platinum Member
Posts: 3914
Joined: Mon Aug 31, 2015 10:19 pm
Location: Greenie and Goldie Country not to metion the WI Badgers!

Re: What Do I Need To Add Casters To Greenie?

Post by ERLover »

suntower wrote:Funny you should mention that. I happen to have a couple of -very- sturdy dairy carts (they're wood pallettes with industrial strength casters which are used for moving milk around in grocery stores). They can hold hundreds of pounds.

But wheels can't be -locked-.

I assume your casters had locking wheels?

JPG wrote:
suntower wrote:Thanks for going the extra mile, JPG. No way I can afford 'new'. But the longer I have this thing, the more I want to be able to move it around!
For decades, I used a couple of furniture dolly like contraptions. Board and casters. Lift each end up onto them. Three casters(pivoting) each.
Depending on wheel diameter, may set the SS too high for comfort. A set of wedges would lock the wheels.
KNOWLEDGE AND EXPERIENCE EQUALS WISDOM. Albert Einstein
The Greatness officially starts :D :D :D :D :D :D
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them. :)
suntower
Gold Member
Posts: 79
Joined: Wed Jun 29, 2016 5:58 pm
Location: Seattle

Re: What Do I Need To Add Casters To Greenie?

Post by suntower »

ERLover wrote:A set of wedges would lock the wheels.
I'm envisioning a trip to the ER if I do that and then try to swing up into 'drill press mode'.

Or maybe I'm just being a sissy. :D

But whatever I do? I do -not- want to have to even think about something slipping. In addition to poverty, I suffer from -serious- absent-mindedness these days. I need goof-proof.
Greenie #317956. Jointer Model 620 #40077
User avatar
JPG
Platinum Member
Posts: 35600
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Re: What Do I Need To Add Casters To Greenie?

Post by JPG »

suntower wrote:Funny you should mention that. I happen to have a couple of -very- sturdy dairy carts (they're wood pallettes with industrial strength casters which are used for moving milk around in grocery stores). They can hold hundreds of pounds.

But wheels can't be -locked-.

I assume your casters had locking wheels?

JPG wrote:
suntower wrote:Thanks for going the extra mile, JPG. No way I can afford 'new'. But the longer I have this thing, the more I want to be able to move it around!
For decades, I used a couple of furniture dolly like contraptions. Board and casters. Lift each end up onto them. Three casters(pivoting) each.
No, you put the SS on to move it and take it off to use it.
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10
E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
suntower
Gold Member
Posts: 79
Joined: Wed Jun 29, 2016 5:58 pm
Location: Seattle

Re: What Do I Need To Add Casters To Greenie?

Post by suntower »

Cheap. I like it. Ths SS is just light enough that I think I could manage it.
Greenie #317956. Jointer Model 620 #40077
ERLover
Platinum Member
Posts: 3914
Joined: Mon Aug 31, 2015 10:19 pm
Location: Greenie and Goldie Country not to metion the WI Badgers!

Re: What Do I Need To Add Casters To Greenie?

Post by ERLover »

suntower wrote:Cheap. I like it. Ths SS is just light enough that I think I could manage it.
Harbor Freight
http://www.harborfreight.com/catalogsea ... ure+movers

http://www.harborfreight.com/18-in-x-12 ... 61899.html
KNOWLEDGE AND EXPERIENCE EQUALS WISDOM. Albert Einstein
The Greatness officially starts :D :D :D :D :D :D
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them. :)
User avatar
JPG
Platinum Member
Posts: 35600
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Re: What Do I Need To Add Casters To Greenie?

Post by JPG »

suntower wrote:Cheap. I like it. Ths SS is just light enough that I think I could manage it.
And it comes with a 'handle' on each end.

Open bottom dolly not a good idea, ;) but that is the general adea.
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10
E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
sryoder
Gold Member
Posts: 43
Joined: Thu Aug 18, 2016 11:50 am
Location: Bisbee, AZ

Re: What Do I Need To Add Casters To Greenie?

Post by sryoder »

The Shopsmith retractable casters are worth every penny they cost. My "shop" consists of a carport with a 10' x 2.5' lockable closet where I store the SS. If I couldn't move my SS around easily this would never work.
-Steve Yoder, Mark V Model 500
Post Reply