I opted for the free bandsaw and ordered an upgrade kit to use my current lift assist. Now just need to decide what to do with the 520.
New Mark 7 is Ordered
Moderator: admin
-
mbcabinetmaker
- Platinum Member
- Posts: 1627
- Joined: Thu Jul 20, 2006 6:18 am
- Location: Greer SC
New Mark 7 is Ordered
So I decided to go by the Shopsmith demo after 8:30 church service today. I had never seen the Prower Pro up close and personal before. Paul the demo guy and I were talking new head stock for my 520 vs new Mark 7 and he was quoting prices when my wife ask if I was just getting a new headstock. I replied that that was an option but also explained the advantages of going with the Mark 7. She said well it would be advantageous tax wise to go with the 7.
Well I thought I needed to go get my hearing checked because she never encourages me to buy equipment.
We started crunching numbers and talking Lowes discounts vs 18 months same as cash etc*****. It was just too much and since there was a line out the front of IHOP when we drove by I hadn't even had coffee yet. Our niece was coming to our house at 12:00 to pick up some chairs that we were giving her so I said let's go get breakfast and talk about the purchase before going to meet our niece so that's what we did. Well sweet little niece was about 2 hours late so I got busy around the house. My wife had gone in to look over the finances because I had already decided not to purchase right now on the 18 month plan and loose the 5% discount. I was planning to wait a while longer until I could pay cash but after everyone left with the free furniture my wife said we had the money on hand if I wanted to order the Mark 7. You don't have to tell me twice!!
Well actually she did.
Anyway back to Lowes and we went through the entire demonstration again so I gave her ample time to change her mind.
I opted for the free bandsaw and ordered an upgrade kit to use my current lift assist. Now just need to decide what to do with the 520.
I opted for the free bandsaw and ordered an upgrade kit to use my current lift assist. Now just need to decide what to do with the 520.
Last edited by mbcabinetmaker on Mon May 08, 2017 8:00 am, edited 3 times in total.
****************
****************
Mark
2017 Power Pro Mark 7
2002 50th anniversary model 520
and a few other woodworking tools.
****************
Mark
2017 Power Pro Mark 7
2002 50th anniversary model 520
and a few other woodworking tools.
Re: New Mark 7 is Ordered
Congratulations!
The powerpro has it own lift cylinder to make up for the added 25 pounds or so. You can get that as an upgrade in case your interested. You can normally call these guys and add on something and still get the demo pricing.
Ed
The powerpro has it own lift cylinder to make up for the added 25 pounds or so. You can get that as an upgrade in case your interested. You can normally call these guys and add on something and still get the demo pricing.
Ed
{Knight of the Shopsmith} [Hero's don't wear capes, they wear dog tags]
Re: New Mark 7 is Ordered
Sounds pretty much how I bought mine. I did not buy a full up MK 7. Just the new head stock and double tilt kit. This was in Dec 2012. We went to Salt Lake to the Lowe's for a demo. My wife is a wood worker so she trusts me when we spend money on wood work stuff. I was on the fence due to the cost (not that I didn't have the money). We left and came back because she said if you want it get it.mbcabinetmaker wrote:So I decided to go by the Shopsmith demo after 8:30 church service today. I had never seen the Prower Pro up close and personal before. Paul the demo guy and I were talking new head stock for my 520 vs new Mark 7 and he was quoting prices when my wife ask if I was just getting a new headstock. I replied that that was an option but also explained the advantages of going with the Mark 7. She said well it would be advantasious tax wise to go with the 7.Well I thought I needed to go get my hearing checked because she never encourages me to buy equipment.
We started crunching numbers and talking Lowes discounts vs 18 months same as cash etc*****. It was just too much and since there was a line out the front of IHOP when we drove by I hadn't even had coffee yet. Our niece was coming to our house at 12:00 to pick up some chairs that we were giving her so I said let's go get breakfast and talk about the purchase before going to meet our niece so that's what we did. Well sweet little niece was about 2 hours late so I got busy around the house. My wife had gone in to look over the finances because I had already decided not to purchase right now on the 18 month plan and loose the 5% discount. I was planning to wait a while longer until I could pay cash but after everyone left with the free furniture my wife said we had the money if I wanted to order the Mark 7. You don't have to tell me twice!!
Well actually she did.
Anyway back to Lowes and we went through the entire demonstration again so I gave her ample time to change her mind.
![]()
I opted for the free bandsaw and ordered an upgrade kit to use my current lift assist. Now just need to decide what to do with the 520.
The demo guy turned out to be Dave Folkerth. We had a great time talking about Hans Goldschmidt and the 10ER.
I used the 18 month no interest on the Lowe's credit card and also got my 10% military discount.
As for your 520, make a dedicated drill press. You will never regret it.
- Attachments
-
- IMAG0236.jpg (179.8 KiB) Viewed 7546 times
John & Mary Burger
Eagle's Lair Woodshop
Hooper, UT
Eagle's Lair Woodshop
Hooper, UT
- JPG
- Platinum Member
- Posts: 35598
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: New Mark 7 is Ordered
He already has had a dedicated wall mount total shop drill press and got rid of it.jsburger wrote: . . .
As for your 520, make a dedicated drill press. You will never regret it.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
- rjent
- Platinum Member
- Posts: 2121
- Joined: Fri Mar 14, 2014 3:00 pm
- Location: Hot Springs, New Mexico
Re: New Mark 7 is Ordered
Outstanding, the machine certainly changes the game, that is for sure. If you have room (even if you don't LOL) keep your 520. Just my .02.
Congrats! Did they give you a delivery date?
Congrats! Did they give you a delivery date?
Dick
1965 Mark VII S/N 407684
1951 10 ER S/N ER 44570 -- Reborn 9/16/14
1950 10 ER S/N ER 33479 Reborn July 2016
1950 10 ER S/N ER 39671
1951 jigsaw X 2
1951 !0 ER #3 in rebuild
500, Jointer, Bsaw, Bsander, Planer
2014 Mark 7 W/Lift assist - 14 4" Jointer - DC3300
And a plethora of small stuff .....
"The trouble with quotes on the Internet is that you can never know if they are genuine." - Benjamin Franklin
1965 Mark VII S/N 407684
1951 10 ER S/N ER 44570 -- Reborn 9/16/14
1950 10 ER S/N ER 33479 Reborn July 2016
1950 10 ER S/N ER 39671
1951 jigsaw X 2
1951 !0 ER #3 in rebuild
500, Jointer, Bsaw, Bsander, Planer
2014 Mark 7 W/Lift assist - 14 4" Jointer - DC3300
And a plethora of small stuff .....
"The trouble with quotes on the Internet is that you can never know if they are genuine." - Benjamin Franklin
-
mbcabinetmaker
- Platinum Member
- Posts: 1627
- Joined: Thu Jul 20, 2006 6:18 am
- Location: Greer SC
Re: New Mark 7 is Ordered
rjent wrote:Outstanding, the machine certainly changes the game, that is for sure. If you have room (even if you don't LOL) keep your 520. Just my .02.
Congrats! Did they give you a delivery date?
No delivery date as of now. The order will be turned in this morning and I should get a call from the mother ship.
****************
****************
Mark
2017 Power Pro Mark 7
2002 50th anniversary model 520
and a few other woodworking tools.
****************
Mark
2017 Power Pro Mark 7
2002 50th anniversary model 520
and a few other woodworking tools.
-
mbcabinetmaker
- Platinum Member
- Posts: 1627
- Joined: Thu Jul 20, 2006 6:18 am
- Location: Greer SC
Re: New Mark 7 is Ordered
This was quite unexpected but my wife got a call from Shopsmith this morning and my machine is shipping out today. 
****************
****************
Mark
2017 Power Pro Mark 7
2002 50th anniversary model 520
and a few other woodworking tools.
****************
Mark
2017 Power Pro Mark 7
2002 50th anniversary model 520
and a few other woodworking tools.
- rlkeeney
- Platinum Member
- Posts: 781
- Joined: Fri Nov 14, 2008 5:53 am
- Location: Tallahassee FL
- Contact:
Re: New Mark 7 is Ordered
You can send that crappy old 520 to me. I try hard to find a good use for it. 