Retractable caster problem??

Forum for Maintenance and Repair topics. Feel free to ask questions or contribute.

Moderator: admin

Post Reply
dgreen810
Gold Member
Posts: 478
Joined: Sun Dec 15, 2013 3:17 pm
Location: Tulsa Area

Retractable caster problem??

Post by dgreen810 »

The retractable casters on my Mark V seem to work OK, however facing the speed control side the one on the right does not have a 2 step operation. It is either up or down, any suggestions?? The one on the left is two step.

I occasionally have the same problem with the retractable casters on my Pro Planner??

Don G
br549
Platinum Member
Posts: 657
Joined: Sun Nov 30, 2014 8:51 am
Location: Midway between Houston/Galveston, TX

Re: Retractable caster problem??

Post by br549 »

Not sure unless the the cam is worn, or the foot pedal could possibly be out of sync with the cam.

Attached are pictures of mine in the three different positions. Note the position of the cam and how it is the "thickest" when it pushes the plunger down so that weight is on the casters. Also note the foot pedal position at each stage and compare it to yours.
Attachments
01-weight on legs.JPG
01-weight on legs.JPG (167.81 KiB) Viewed 3178 times
02-intermediate position.JPG
02-intermediate position.JPG (177.4 KiB) Viewed 3178 times
03-weight on caster.JPG
03-weight on caster.JPG (169.04 KiB) Viewed 3178 times
dgreen810
Gold Member
Posts: 478
Joined: Sun Dec 15, 2013 3:17 pm
Location: Tulsa Area

Re: Retractable caster problem??

Post by dgreen810 »

Thanks for the photos. Will do some checking!!

Don G
dgreen810
Gold Member
Posts: 478
Joined: Sun Dec 15, 2013 3:17 pm
Location: Tulsa Area

Re: Retractable caster problem??

Post by dgreen810 »

Removed the legs and casters, Re-drilled the mounting holes 1/4" lower, re-installed the legs and casters. Now they work as they should. :) :)

1st stage 1/4" from floor, 2nd stage 1/2" from floor.

Don G
Attachments
IMGP0081.JPG
IMGP0081.JPG (655.84 KiB) Viewed 3104 times
Post Reply