Table saw deck

[DennisImhoff]

My aluminum deck is discolored and dark. I believe from waxing. I tried to remove the discoloration with mineral spirits. Anyone know of a cleaner that would help.

[Hobbyman2]

Have you tried aluminum polish .

Mothers make aluminum polish for rims,,

[br549]

You might need to sand it down. I sanded mine to remove varnish which I had foolishly applied, to protect guidelines I had drawn. Here are pictures of before and after sanding.

P5121541a.jpg (286.7 KiB) Viewed 4083 times

P5121546a.jpg (267.92 KiB) Viewed 4083 times

P5121548a.jpg (147.89 KiB) Viewed 4083 times

And here is a link to my entire post, where sanding was the first step before engraving permanent guidelines in the table top.

https://www.shopsmith.com/ss_forum/view ... es#p188785

[dusty]

You might need to sand it down. I sanded mine to remove varnish which I had foolishly applied, to protect guidelines I had drawn. Here are pictures of before and after sanding.
P5121541a.jpgP5121546a.jpgP5121548a.jpg
And here is a link to my entire post, where sanding was the first step before engraving permanent guidelines in the table top.

https://www.shopsmith.com/ss_forum/view ... es#p188785

Thank you for posting this. I had viewed and commented on the original thread but had also forgotten about it.

I am going to follow your lead and do some work on my tables. I have long wanted at least the centerline. Now I know well how to achieve that. I have also wanted Dremel tool that would do what needs to be done. An early Christmas present will solve that (hmm, maybe a late birthday present).

I'm thinking though that maybe this could be done with a router bit and a variable speed router.

Thanks again.

BTW, I really like what you have done to your table.