Looks like a failure of the glue........ Well something to work on. The left over bits look a lot like duco cement but I guess any of that sort of stuff pretty much the same.
- IMG_5286sc.jpg (206.33 KiB) Viewed 5312 times
Quick Index Quill Feed Handle issue
Moderator: admin
Quick Index Quill Feed Handle issue
So I take the handle off one side and put it on the other and I notice it is not being held on????? Looking at it I notice this hole where the magnet should be........ the magnet is still back on the other side.
Looks like a failure of the glue........ Well something to work on. The left over bits look a lot like duco cement but I guess any of that sort of stuff pretty much the same.
Ed
Looks like a failure of the glue........ Well something to work on. The left over bits look a lot like duco cement but I guess any of that sort of stuff pretty much the same.
Ed
{Knight of the Shopsmith} [Hero's don't wear capes, they wear dog tags]
Re: Quick Index Quill Feed Handle issue
Hope you get it repaired. Mine has been one of my favorite upgrades from shopsmith.
Gale's Law: The bigger the woodworking project, the less the mistakes show in any photo taken far enough away to show the entire project!
-
dusty
- Platinum Member
- Posts: 21530
- Joined: Wed Nov 22, 2006 6:52 am
- Location: Tucson (Wildcat Country), Arizona
Re: Quick Index Quill Feed Handle issue
I must ask! What is there about this upgrade that makes it your favorite?
When I first became aware of it, I made the snap decision that I did not want/need the quick removal feature since I hardly ever move mine. Why might that have been the wrong decision?
When I first became aware of it, I made the snap decision that I did not want/need the quick removal feature since I hardly ever move mine. Why might that have been the wrong decision?
"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.
Dusty
Sent from my Dell XPS using Firefox.
Re: Quick Index Quill Feed Handle issue
I said one of my favorites! I also understand your skepticism. But to answer your question, I do reposition my handle a fair amount and I find this to be much easier to reposition and it feels more secure (my OEM handle never seemed to tighten). I have one Shopsmith and so frequently reposition that handle. It is especially useful in drill press mode or disc sanding to length. And I frequently move the quill to make fine adjustments when ripping; I get close with the fence and the tweak it with the handle; I find it is easy to position the handle to make the adjustment and then move it out of the way.
Gale's Law: The bigger the woodworking project, the less the mistakes show in any photo taken far enough away to show the entire project!
-
JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Quick Index Quill Feed Handle issue
Loctite(red or blue) should fix it.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Re: Quick Index Quill Feed Handle issue
Well it is back together and ready to be put back on. Why so long? Let's start with what happens when you move things in the shop and then can't find them again..... case in point my loctite collection. It use to be on a shelf which I re-purposed but what did I do with the loctite?? Never mind I pick up another tube.
It has had a couple of days drying time in the house so today it goes back in to the shop and back on the shopsmith.
BTW I have another one on order since OCT 18, fast approaching a 3 month back order! I need a bunch of you to order them so they do what ever it is that they need to do to get some in. Anyone else stuck in the same boat?
Ed
It has had a couple of days drying time in the house so today it goes back in to the shop and back on the shopsmith.
BTW I have another one on order since OCT 18, fast approaching a 3 month back order! I need a bunch of you to order them so they do what ever it is that they need to do to get some in. Anyone else stuck in the same boat?
Ed
{Knight of the Shopsmith} [Hero's don't wear capes, they wear dog tags]