Tool Rest Post?
Moderator: admin
Tool Rest Post?
Sorry if I break any forum etiquette, I didn't see any rules for posting anywhere. I just bought a Shopsmith Mark VII for $200 from a guy at work. It has most of the accessories, but is missing the lathe tool rest assembly. Most of the parts (arm and tool rest) aren't too badly priced, but the tool rest post is about $80, and I don't know 100% if it will fit the Mark VII. Can anyone confirm that the PN:514416 Tool Rest Post sold on the Shopsmith site will fit a Mark VII? Alternatively, is it possible to remove a post from the saw table and use that instead or are there aftermarket posts that will work?
-
JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Tool Rest Post?
I did not verify the PN you stated, but any there is some differences in the post, but they should not cause compatibility problems.
At $80 I would look on e-bay for something less $.
The only one there today is too $.
At $80 I would look on e-bay for something less $.
The only one there today is too $.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
-
ChrisNeilan
- Platinum Member
- Posts: 1463
- Joined: Sun Oct 27, 2013 5:30 pm
- Location: Waterford, Connecticut
- Contact:
Re: Tool Rest Post?
Is this what you are looking for? I have an extra you can have for the cost of shipping. PM me if interested. This came off a Mark V from 1982, but should work.
Chris
Chris
- Attachments
-
- tool rest post 2.jpg (276.04 KiB) Viewed 10615 times
Chris Neilan
Shopsmith Mark 7, Shopsmith Mark V 1982, shortened, Shopsmith 10 ER; Craftsman table saw (1964); Powermatic 3520B lathe
Shopsmith Mark 7, Shopsmith Mark V 1982, shortened, Shopsmith 10 ER; Craftsman table saw (1964); Powermatic 3520B lathe
-
JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Tool Rest Post?
That'l work!ChrisNeilan wrote:Is this what you are looking for? I have an extra you can have for the cost of shipping. PM me if interested. This came off a Mark V from 1982, but should work.
Chris
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
-
chapmanruss
- Platinum Member
- Posts: 4543
- Joined: Tue Aug 26, 2014 8:16 pm
- Location: near Portland, Oregon
Re: Tool Rest Post?
I just checked the Mark VII manual and parts lists and although the arm and tool rest are different from the Mark 5 the post looks the same as the older Mark 5 post with the grooves all the way around the post and has the same part number 501354 as the Mark 5 from that era, not with the teeth on one side like the newer ones. It appears a Mark 5 lathe tool rest assembly will work in a Mark VII Carriage. One of the caricaturists of the Mark VII parts is they are squared and angled, not rounded surfaces like the Mark V. It's the easiest way to tell a mislabeled part like the Tailstock on eBay or other sale sites.
- Attachments
-
Parts Manual page 14.PDF- Mark VII Parts List P-14
- (1.05 MiB) Downloaded 960 times
Last edited by chapmanruss on Mon Feb 19, 2018 2:38 pm, edited 1 time in total.
Russ
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's, 2 Power Stations & Crafter's Station
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored.
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's, 2 Power Stations & Crafter's Station
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored.
-
JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Tool Rest Post?
Actually the M5/VII posts are threaded, not grooved(ringed).
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
-
chapmanruss
- Platinum Member
- Posts: 4543
- Joined: Tue Aug 26, 2014 8:16 pm
- Location: near Portland, Oregon
Re: Tool Rest Post?
Sorry wrong terminology
Like the Mark 5 post shown above.
Like the Mark 5 post shown above.
Russ
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's, 2 Power Stations & Crafter's Station
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored.
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's, 2 Power Stations & Crafter's Station
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored.
-
JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Tool Rest Post?
Truth be known, only close examination will reveal the 'spiral' groove.chapmanruss wrote:Sorry wrong terminology
Like the Mark 5 post shown above.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Re: Tool Rest Post?
Thanks for the offer ChrisNeilan! I did buy the upgrade arm (I'm new to woodturning, so the easy adjustability seems like it would be very useful), so I think I'll try it out with the table post and see how that works.ChrisNeilan wrote:Is this what you are looking for? I have an extra you can have for the cost of shipping. PM me if interested. This came off a Mark V from 1982, but should work.
Chris
Re: Tool Rest Post?
Chris if you still have this too rest I'd be interested in buying it from you