I just purchased a SS osillating drum sander attachment on Ebay but it did not come with a manual. Does anyone have a manual for one of these things? Any help would be appreciated.
Thanks
Osillating Drum sander
Moderator: admin
-
mbcabinetmaker
- Platinum Member
- Posts: 1627
- Joined: Thu Jul 20, 2006 6:18 am
- Location: Greer SC
Re: Osillating Drum sander
I can scan mine and send you a copy. PM me your e-mail and I'll try to work it in tomorrow.stew wrote:I just purchased a SS osillating drum sander attachment on Ebay but it did not come with a manual. Does anyone have a manual for one of these things? Any help would be appreciated.
Thanks
****************
****************
Mark
2017 Power Pro Mark 7
2002 50th anniversary model 520
and a few other woodworking tools.
****************
Mark
2017 Power Pro Mark 7
2002 50th anniversary model 520
and a few other woodworking tools.
Re: Osillating Drum sander
Thanks Mark- PM sent
-
JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Osillating Drum sander
- Drum Sander.jpeg (71.19 KiB) Viewed 6766 times
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Re: Osillating Drum sander
After messing around with the Osillating Sander I came up with a modification for those that have one of their SS permanently mounted in a vertical position. When I attached the OS the headstock had to be lowered about 8" and made the use of the drill press too low. I modified the OS attachment and moved it higher and mounted it to an extension table. As you can see this gives me in and out alignment with the extension table and then I slotted the attachment holes to give me side to side alignment. I drilled and tapped the side of the extension table for the mounting. This now can be mounted very easily with just the two screws and I do not have to mess with moving the headstock up or down when I want to use it. Works for me!
- DSCF6789.JPG (1.03 MiB) Viewed 6477 times
- DSCF6790.JPG (1.57 MiB) Viewed 6477 times
- DSCF6791.JPG (1.09 MiB) Viewed 6477 times
- DSCF6792.JPG (1.51 MiB) Viewed 6477 times
- DSCF6793.JPG (1.57 MiB) Viewed 6477 times