About a month and a half ago while looking through my local classified I found a Shopsmith for $25. The owner told me the motor still worked, but everything was stuck, seized or rusted. Option one, make a dedicated shorty drill press (modeled after the one made by jsburger) Option two, one of my Shopsmith’s has some dents in one of its legs, worse case scenario I could salvage a leg.
When I got it home and started to disassemble the machine it proved to be a little bit of a challenge. One of the way tubes was bent making removal of the carriage and headstock a little tricky. Fortunately both of the bench tubes were straight and with a little bit of effort I figured they could become way tubes. From the good way tube or the ends of the bent way tube I figured I could make a reasonable shorty bench tube.
I have always like the gold and brown color so I now have a 1973-78 Goldie.
Another Dedicated Shorty Drill Press
Moderator: admin
Another Dedicated Shorty Drill Press
- Attachments
-
- A new Goldie
- C5997042-17B0-4B8A-802A-0366CA451DE1.jpeg (97.37 KiB) Viewed 7873 times
-
- 678F9F25-D465-4C80-953D-04D32B15432C.jpeg (68.76 KiB) Viewed 7873 times
-
- 3C64F0BA-DFB1-49F6-BE45-222245C1E8F5.jpeg (68.22 KiB) Viewed 7873 times
-
- Here is what I started with
- E9018A70-3E8C-466E-B6CE-D8C1E69EC172.jpeg (122.63 KiB) Viewed 7872 times
-
br549
- Platinum Member
- Posts: 657
- Joined: Sun Nov 30, 2014 8:51 am
- Location: Midway between Houston/Galveston, TX
Re: Another Dedicated Shorty Drill Press
Very nice! Considering the condition when you started, also an incredible amount of work in a short period of time. Well done and I'm sure it will be a handy addition to your collection.
-
BuckeyeDennis
- Platinum Member
- Posts: 3814
- Joined: Tue Jul 24, 2012 10:03 pm
- Location: Central Ohio
Re: Another Dedicated Shorty Drill Press
Nice save! Who says that you can’t make a silk purse from a sow’s ear?
-
JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Another Dedicated Shorty Drill Press
So now thee has three! Very nicely done.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Re: Another Dedicated Shorty Drill Press
- 446D7A49-592E-4BB4-A7C7-930A6F851499.jpeg (82.21 KiB) Viewed 7827 times
-
JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Another Dedicated Shorty Drill Press
Will he get to pick which one?benmcn wrote:446D7A49-592E-4BB4-A7C7-930A6F851499.jpegThe only thing better than three Shopsmiths is four ... at least that’s what I keep telling my wife. My middle son likes woodworking so I told him he could have one of them when he has a place to put it.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Re: Another Dedicated Shorty Drill Press
Maybe but I think not.JPG wrote:Will he get to pick which one?benmcn wrote:446D7A49-592E-4BB4-A7C7-930A6F851499.jpegThe only thing better than three Shopsmiths is four ... at least that’s what I keep telling my wife. My middle son likes woodworking so I told him he could have one of them when he has a place to put it.
John & Mary Burger
Eagle's Lair Woodshop
Hooper, UT
Eagle's Lair Woodshop
Hooper, UT