Mark VII caster assembly manual

Forum for Maintenance and Repair topics. Feel free to ask questions or contribute.

Moderator: admin

Post Reply
StevenAyres
Gold Member
Posts: 84
Joined: Sun Apr 21, 2019 11:21 am
Location: Prescott AZ

Mark VII caster assembly manual

Post by StevenAyres »

Below are page scans of the Magna Mark VII caster assembly supplement. I suspect someone got something wrong here.

When I first got my Mark VII I wondered about the caster pedals. It seemed like they didn't work anywhere near as well as those on my Mark 5.

This manual supplement came with my machine, and the illustration on the first page matched my setup. Then I noticed that in catalog photos, the pedals faced the opposite way.

I bought a parts VII and found the pedals mounted backward as well.

I suspect this manual is the cause of the confusion, both with the illustration on page 1 and the hard-to-read orthographic on page 2 — unless someone can tell me why they're actually supposed to work this way.
StevenAyres
Gold Member
Posts: 84
Joined: Sun Apr 21, 2019 11:21 am
Location: Prescott AZ

Re: Mark VII caster assembly manual

Post by StevenAyres »

Here are the images.
VII caster 1.jpg
VII caster 1.jpg (380.13 KiB) Viewed 12497 times
VII caster 2.jpg
VII caster 2.jpg (192.57 KiB) Viewed 12497 times
User avatar
JPG
Platinum Member
Posts: 35600
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Re: Mark VII caster assembly manual

Post by JPG »

There is no inconsistency between the two pages. The first page shows it upside down.
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10
E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
StevenAyres
Gold Member
Posts: 84
Joined: Sun Apr 21, 2019 11:21 am
Location: Prescott AZ

Re: Mark VII caster assembly manual

Post by StevenAyres »

Good eye! I missed the position of the foot.
MFriedman
Bronze Member
Posts: 1
Joined: Mon Aug 03, 2020 12:34 pm

Re: Mark VII caster assembly manual

Post by MFriedman »

I have an Mark VII mounted on the old dust bin base and am looking for a caster set as described in this thread. Does anyone know where I could buy one? I can't seem to find it on ShopSmith.com nor Amazon or EBay...
edma194
Platinum Member
Posts: 2205
Joined: Fri Jun 19, 2020 4:08 pm

Re: Mark VII caster assembly manual

Post by edma194 »

Oh! Looks like you are talking about a real Mark VII. What I first put in below is about Mark Vs and 500s.
MFriedman wrote:I have an Mark VII mounted on the old dust bin base and am looking for a caster set as described in this thread. Does anyone know where I could buy one? I can't seem to find it on ShopSmith.com nor Amazon or EBay...
The guy in the link below advertises on Craig's List all the time. He has a ton of Shopsmith parts, no idea where he gets them, and he wants too much money for them. But I asked him about casters once and he was willing to come down in price and let me pick out a set. I'll bet that's the best looking set he had that you can see there in the picture in the ad.

https://providence.craigslist.org/tls/d ... 66494.html

You can see all his ads if you get to the Boston area Craig's List and search on Shopsmith.
Ed from Rhode Island

510 PowerPro Double Tilt:Greenie PowerPro Drill Press:500 Sanding Shorty w/Belt&Strip Sanders
Super Sawsmith 2000:Scroll Saw w/Stand:Joint-Matic:Power Station:Power Stand:Bandsaw:Joiner:Jigsaw
1961 Goldie:1960 Sawsmith RAS:10ER
Post Reply