Possible Problem Still
Moderator: admin
- edflorence
- Platinum Member
- Posts: 689
- Joined: Thu Jul 20, 2006 8:14 pm
- Location: Idaho Panhandle
Re: Possible Problem Still
Hooray!
Ed
Idaho Panhandle
Mark 5 of various vintages, Mini with reversing motor, bs, dc3300, jointer, increaser, decreaser
Idaho Panhandle
Mark 5 of various vintages, Mini with reversing motor, bs, dc3300, jointer, increaser, decreaser
Re: Possible Problem Still
Now that I can post pictures again here are two screen shots of what I was seeing. That is just the first two screens of the page. There were 5 or 6 full screens in the entire page.
The problem was if I clicked on the User Control Panel link at the bottom of the first picture there was no link to the Board Preferences. Ed's direct link got me there so I could change it and it worked. Thanks again Ed!!!
The problem was if I clicked on the User Control Panel link at the bottom of the first picture there was no link to the Board Preferences. Ed's direct link got me there so I could change it and it worked. Thanks again Ed!!!
- Attachments
-
- Capture.JPG (155.43 KiB) Viewed 2560 times
-
- Capture1.JPG (145.89 KiB) Viewed 2560 times
John & Mary Burger
Eagle's Lair Woodshop
Hooper, UT
Eagle's Lair Woodshop
Hooper, UT
- edflorence
- Platinum Member
- Posts: 689
- Joined: Thu Jul 20, 2006 8:14 pm
- Location: Idaho Panhandle
Re: Possible Problem Still
Yep...I recognize that screen. Thats the change that happened to me as well. Looks like Ed's link are the cure!
- BuckeyeDennis
- Platinum Member
- Posts: 3812
- Joined: Tue Jul 24, 2012 10:03 pm
- Location: Central Ohio
Re: Possible Problem Still
I know nothing about the bug. But judging from the other browser tabs, I’d sure like to go to John’s place for dinner!
Re: Possible Problem Still
BuckeyeDennis wrote:I know nothing about the bug. But judging from the other browser tabs, I’d sure like to go to John’s place for dinner!
John & Mary Burger
Eagle's Lair Woodshop
Hooper, UT
Eagle's Lair Woodshop
Hooper, UT
- dusty
- Platinum Member
- Posts: 21530
- Joined: Wed Nov 22, 2006 6:52 am
- Location: Tucson (Wildcat Country), Arizona
Re: Possible Problem Still
I am hesitate to declare my problem "fixed" but I am pleased to be able to say that right now I do not have that problem. I removed the Firefox browser and then reinstalled it. The current version is newer than what was on my computer but I had been using that version for ages with not a hint of this particular issue. At any rate, seems to be operating normally.
I have absolutely no idea how this relates to what was happening in the Shopsmith forum while all my other applications worked fine. Whatever it was I am glad that it is gone. I was about to switch to FB for Shopsmith updates.
I have absolutely no idea how this relates to what was happening in the Shopsmith forum while all my other applications worked fine. Whatever it was I am glad that it is gone. I was about to switch to FB for Shopsmith updates.
"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.
Dusty
Sent from my Dell XPS using Firefox.
Re: Possible Problem Still
FF newest version is 81.0.1.
SS 500(09/1980), DC3300, jointer, bandsaw, belt sander, Strip Sander, drum sanders,molder, dado, biscuit joiner, universal lathe tool rest, Oneway talon chuck, router bits & chucks and a De Walt 735 planer,a #5,#6, block planes. ALL in a 100 square foot shop.
.
.
Bob
.
.
Bob
- JPG
- Platinum Member
- Posts: 35598
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Possible Problem Still
My ff browser gets updated quite often(at power up).
81.0???
81.0???
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Re: Possible Problem Still
I am on the Release channel updates. I think you get releases before others. I have 81.0.1 today.JPG wrote:My ff browser gets updated quite often(at power up).
81.0???
How do you get on the Release channel?. I don't know, I have been there for years. I am sure somewhere there is a way to change your update channel. I know there is a beta channel also so you get beta updates when they are released.
You can always check if FF is up to date by clicking on Help and then About Firefox. It will say up to date or download the latest version.
John & Mary Burger
Eagle's Lair Woodshop
Hooper, UT
Eagle's Lair Woodshop
Hooper, UT
- JPG
- Platinum Member
- Posts: 35598
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Possible Problem Still
And mine says 81.0 and mentions an update which I will turn loose after clearing all the stuff currently 'taking a break'.(MINIMIZED)jsburger wrote:I am on the Release channel updates. I think you get releases before others. I have 81.0.1 today.JPG wrote:My ff browser gets updated quite often(at power up).
81.0???
How do you get on the Release channel?. I don't know, I have been there for years. I am sure somewhere there is a way to change your update channel. I know there is a beta channel also so you get beta updates when they are released.
You can always check if FF is up to date by clicking on Help and then About Firefox. It will say up to date or download the latest version.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange