Yuba Bandsaw Manual
Moderator: admin
Yuba Bandsaw Manual
Does anyone know where I can find a Yuba Model 630 Bandsaw manual, either paper or PDF version? I would like to find a manual from prior to the bushing or table changes.
Marc Jones
Model 10ER (1952), s/n: 72883 (MickyD restored in 2009/10) / Variable Speed Changer / A-34 Jigsaw / Jointer-Shaper Fence
Mark 5 Model 500 (1955), s/n: 309828 (MickyD restored in 2008/09) / Magna Jigsaw Model 610, s/n 65001 / Yuba 11” Bandsaw Model 630, s/n 39807 / Magna Jointer Model 620, s/n 17792 (restored in 2021) / Magna 6” Belt Sander Model 640, s/n 13742 (to be restored)
Professional Planer Model M5082, s/n 003918
DC3300 Dust Collector (circa 1998)
Model 10ER (1952), s/n: 72883 (MickyD restored in 2009/10) / Variable Speed Changer / A-34 Jigsaw / Jointer-Shaper Fence
Mark 5 Model 500 (1955), s/n: 309828 (MickyD restored in 2008/09) / Magna Jigsaw Model 610, s/n 65001 / Yuba 11” Bandsaw Model 630, s/n 39807 / Magna Jointer Model 620, s/n 17792 (restored in 2021) / Magna 6” Belt Sander Model 640, s/n 13742 (to be restored)
Professional Planer Model M5082, s/n 003918
DC3300 Dust Collector (circa 1998)
-
chapmanruss
- Platinum Member
- Posts: 4534
- Joined: Tue Aug 26, 2014 8:16 pm
- Location: near Portland, Oregon
Re: Yuba Bandsaw Manual
Marc,
I have an original 1956 Bandsaw Manual which should be the same as the Yuba Manual except it says Magna Power Tool Corporation on it. It is not copied yet but I can do it and try to get you a PDF of it.
I have an original 1956 Bandsaw Manual which should be the same as the Yuba Manual except it says Magna Power Tool Corporation on it. It is not copied yet but I can do it and try to get you a PDF of it.
Russ
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's, 2 Power Stations & Crafter's Station
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored.
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's, 2 Power Stations & Crafter's Station
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored.
Re: Yuba Bandsaw Manual
Russ,
Thank you, but hold off for now. I did some more searching and found another source for a similar Magna manual. I found a company called Ozark Tool Manuals & Books and they claim to have the Magna manual for $15 so I bought a copy. Hope to have it within a couple of days. You can see this in their online catalog at:
https://ozarktoolmanuals.com/machineman ... band-saws/
I checked them out a little bit and they look legitimate. Their site says they get old manuals, and then digitally clean up the copies (removing grease smudges, finger prints, punch holes, faded text) so we can have good clean shop copies to work from. I’ll let you know how it looks.
Thank you, but hold off for now. I did some more searching and found another source for a similar Magna manual. I found a company called Ozark Tool Manuals & Books and they claim to have the Magna manual for $15 so I bought a copy. Hope to have it within a couple of days. You can see this in their online catalog at:
https://ozarktoolmanuals.com/machineman ... band-saws/
I checked them out a little bit and they look legitimate. Their site says they get old manuals, and then digitally clean up the copies (removing grease smudges, finger prints, punch holes, faded text) so we can have good clean shop copies to work from. I’ll let you know how it looks.
Marc Jones
Model 10ER (1952), s/n: 72883 (MickyD restored in 2009/10) / Variable Speed Changer / A-34 Jigsaw / Jointer-Shaper Fence
Mark 5 Model 500 (1955), s/n: 309828 (MickyD restored in 2008/09) / Magna Jigsaw Model 610, s/n 65001 / Yuba 11” Bandsaw Model 630, s/n 39807 / Magna Jointer Model 620, s/n 17792 (restored in 2021) / Magna 6” Belt Sander Model 640, s/n 13742 (to be restored)
Professional Planer Model M5082, s/n 003918
DC3300 Dust Collector (circa 1998)
Model 10ER (1952), s/n: 72883 (MickyD restored in 2009/10) / Variable Speed Changer / A-34 Jigsaw / Jointer-Shaper Fence
Mark 5 Model 500 (1955), s/n: 309828 (MickyD restored in 2008/09) / Magna Jigsaw Model 610, s/n 65001 / Yuba 11” Bandsaw Model 630, s/n 39807 / Magna Jointer Model 620, s/n 17792 (restored in 2021) / Magna 6” Belt Sander Model 640, s/n 13742 (to be restored)
Professional Planer Model M5082, s/n 003918
DC3300 Dust Collector (circa 1998)
-
chapmanruss
- Platinum Member
- Posts: 4534
- Joined: Tue Aug 26, 2014 8:16 pm
- Location: near Portland, Oregon
Re: Yuba Bandsaw Manual
Marc,
He has been around for a long time selling restored Manuals. Everett has done the same thing as his time allows but makes them available to us for free. The one you linked to appears to be the same 1st edition of the Bandsaw Manual from 1956. I did copy the Manual and the PDF version is over 22 MB. The individual JPG pages are each under 2 MB. The cover page from mine is below. The back cover follows. The pages are not retouched.
_
_
Someday I would like to get all my old Manuals copied in both PDF and JPG.
He has been around for a long time selling restored Manuals. Everett has done the same thing as his time allows but makes them available to us for free. The one you linked to appears to be the same 1st edition of the Bandsaw Manual from 1956. I did copy the Manual and the PDF version is over 22 MB. The individual JPG pages are each under 2 MB. The cover page from mine is below. The back cover follows. The pages are not retouched.
_
- Page 1.JPG (171.33 KiB) Viewed 1484 times
- Page 12.JPG (221 KiB) Viewed 1484 times
Someday I would like to get all my old Manuals copied in both PDF and JPG.
Russ
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's, 2 Power Stations & Crafter's Station
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored.
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's, 2 Power Stations & Crafter's Station
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored.
Re: Yuba Bandsaw Manual
Thank you for doing the scan. I’m sorry I didn’t post earlier today but I had to go out to a client and didn’t get back until lunchtime.
If there is a way to get your large PDF, I would be interested in comparing your original manual and their “reproduction”, which they say is not a copy.
If there is a way to get your large PDF, I would be interested in comparing your original manual and their “reproduction”, which they say is not a copy.
Marc Jones
Model 10ER (1952), s/n: 72883 (MickyD restored in 2009/10) / Variable Speed Changer / A-34 Jigsaw / Jointer-Shaper Fence
Mark 5 Model 500 (1955), s/n: 309828 (MickyD restored in 2008/09) / Magna Jigsaw Model 610, s/n 65001 / Yuba 11” Bandsaw Model 630, s/n 39807 / Magna Jointer Model 620, s/n 17792 (restored in 2021) / Magna 6” Belt Sander Model 640, s/n 13742 (to be restored)
Professional Planer Model M5082, s/n 003918
DC3300 Dust Collector (circa 1998)
Model 10ER (1952), s/n: 72883 (MickyD restored in 2009/10) / Variable Speed Changer / A-34 Jigsaw / Jointer-Shaper Fence
Mark 5 Model 500 (1955), s/n: 309828 (MickyD restored in 2008/09) / Magna Jigsaw Model 610, s/n 65001 / Yuba 11” Bandsaw Model 630, s/n 39807 / Magna Jointer Model 620, s/n 17792 (restored in 2021) / Magna 6” Belt Sander Model 640, s/n 13742 (to be restored)
Professional Planer Model M5082, s/n 003918
DC3300 Dust Collector (circa 1998)
-
chapmanruss
- Platinum Member
- Posts: 4534
- Joined: Tue Aug 26, 2014 8:16 pm
- Location: near Portland, Oregon
Re: Yuba Bandsaw Manual
At over 22 MB it might even be to large for email. It may take direct mail on a media disk to get it to you.
Russ
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's, 2 Power Stations & Crafter's Station
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored.
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's, 2 Power Stations & Crafter's Station
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored.
-
chapmanruss
- Platinum Member
- Posts: 4534
- Joined: Tue Aug 26, 2014 8:16 pm
- Location: near Portland, Oregon
Re: Yuba Bandsaw Manual
Marc,
Yesterday I found the Yuba Bandsaw Owner's Manual dated 1/60 in my collection. It is probably the same manual version that originally came with your Bandsaw unless it was made after 1963. All part numbers changed at the beginning of 1964. Having a parts list and diagram from 1964 or later, up to the change to the aluminum table would also be helpful in finding the current part numbers.
Yesterday I found the Yuba Bandsaw Owner's Manual dated 1/60 in my collection. It is probably the same manual version that originally came with your Bandsaw unless it was made after 1963. All part numbers changed at the beginning of 1964. Having a parts list and diagram from 1964 or later, up to the change to the aluminum table would also be helpful in finding the current part numbers.
Russ
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's, 2 Power Stations & Crafter's Station
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored.
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's, 2 Power Stations & Crafter's Station
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored.
Re: Yuba Bandsaw Manual
Russ,
I had little hope of actually seeing a Yuba manual. The best I was hoping for was the 1956 copy of the Magna. I would love to have the Yuba too. I don't know if you would trust me with the original copy of the Yuba, but I live near the San Diego State University and their library has several Book-eye Scanners which scan both pages of an open book and can create high quality PDF images of the entire book. The scan sizes vary depending on color and resolution settings. I could scan what ever I can get. Of course I would return the manuals to you, and would offer them to Everett for his archive of manuals.
I agree that it would be good to have a manual from after the 1964 part number change too.
I had little hope of actually seeing a Yuba manual. The best I was hoping for was the 1956 copy of the Magna. I would love to have the Yuba too. I don't know if you would trust me with the original copy of the Yuba, but I live near the San Diego State University and their library has several Book-eye Scanners which scan both pages of an open book and can create high quality PDF images of the entire book. The scan sizes vary depending on color and resolution settings. I could scan what ever I can get. Of course I would return the manuals to you, and would offer them to Everett for his archive of manuals.
I agree that it would be good to have a manual from after the 1964 part number change too.
Marc Jones
Model 10ER (1952), s/n: 72883 (MickyD restored in 2009/10) / Variable Speed Changer / A-34 Jigsaw / Jointer-Shaper Fence
Mark 5 Model 500 (1955), s/n: 309828 (MickyD restored in 2008/09) / Magna Jigsaw Model 610, s/n 65001 / Yuba 11” Bandsaw Model 630, s/n 39807 / Magna Jointer Model 620, s/n 17792 (restored in 2021) / Magna 6” Belt Sander Model 640, s/n 13742 (to be restored)
Professional Planer Model M5082, s/n 003918
DC3300 Dust Collector (circa 1998)
Model 10ER (1952), s/n: 72883 (MickyD restored in 2009/10) / Variable Speed Changer / A-34 Jigsaw / Jointer-Shaper Fence
Mark 5 Model 500 (1955), s/n: 309828 (MickyD restored in 2008/09) / Magna Jigsaw Model 610, s/n 65001 / Yuba 11” Bandsaw Model 630, s/n 39807 / Magna Jointer Model 620, s/n 17792 (restored in 2021) / Magna 6” Belt Sander Model 640, s/n 13742 (to be restored)
Professional Planer Model M5082, s/n 003918
DC3300 Dust Collector (circa 1998)