Server not found AGAIN...
Moderator: admin
- dusty
- Platinum Member
- Posts: 21530
- Joined: Wed Nov 22, 2006 6:52 am
- Location: Tucson (Wildcat Country), Arizona
I think this really has to do with the path that is taken for your data packets to reach the Shopsmith server. We don't always arrive there on the same data port. Some ports work and some don't...apparently.cv3 wrote:It may be that I have just hit it at the right times but I have had an issue accessing the forum site. YET.
I could not get on an hour ago and now I am. Who Knows??
"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.
Dusty
Sent from my Dell XPS using Firefox.
Hi; I have the problem repeatedly this past weekend.I get the "DNS server not found" or "Internet Explorer can not display the website" messages.
I get the error messages at least 12 to 15 times before I get on. As someone else said "VERY FRUSTRATING". I even get the message occasionally when switching from "Community" to "Maintenance and Repair" for example. Kind of like getting kicked off the site. Getting old is frustrating !!!!
Bill
I get the error messages at least 12 to 15 times before I get on. As someone else said "VERY FRUSTRATING". I even get the message occasionally when switching from "Community" to "Maintenance and Repair" for example. Kind of like getting kicked off the site. Getting old is frustrating !!!!
Bill
I hear about this but.... I have not had this problem since the shake up over the SHOPSMITH RLC thing.
Mike......... Rowlett, Texas, near Dallas
86 MK V 500/520. 59 MK 5 Greenie Shorty. SS Jointer, SS Planer,
SS Bandsaw, SS Lathe duplicator, SS Belt Sander,SS Molder & Shaper,
SS Tenon master jig, SS Mortising kit, SS 2 1/4' Drum Sanders, Ringmaster, DC3300....
86 MK V 500/520. 59 MK 5 Greenie Shorty. SS Jointer, SS Planer,
SS Bandsaw, SS Lathe duplicator, SS Belt Sander,SS Molder & Shaper,
SS Tenon master jig, SS Mortising kit, SS 2 1/4' Drum Sanders, Ringmaster, DC3300....
- dusty
- Platinum Member
- Posts: 21530
- Joined: Wed Nov 22, 2006 6:52 am
- Location: Tucson (Wildcat Country), Arizona
[quote="wa2crk"]Hi]Are you saying that when the error message occurs if you just continuously reattempt to get on that you typically manage to do so?
When I get kicked off, I typically go do something else and come back in an hour or so and often find everything working (momentarily, at least).
Be Aware: The crew at Shopsmith is aware of the problem and they are working on it. I have exchanged several PMs with them. It is the intermittent nature of the problem that makes it so difficult.
When I get kicked off, I typically go do something else and come back in an hour or so and often find everything working (momentarily, at least).
Be Aware: The crew at Shopsmith is aware of the problem and they are working on it. I have exchanged several PMs with them. It is the intermittent nature of the problem that makes it so difficult.
"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.
Dusty
Sent from my Dell XPS using Firefox.
- JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
It might be interesting to know what ISP the folks having problems use and what ISP reible uses!charlese wrote:How come some of us have never had these problems?????Is it the route your ISP uses?
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
- JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
This looks too simple to be accurate! Am I missing something, or do not have it setup properly? Or have I installed a worthless version?
[ATTACH]8193[/ATTACH]
[ATTACH]8193[/ATTACH]
- Attachments
-
- ss trace 3-15 b.jpg (45.57 KiB) Viewed 2446 times
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
charlese wrote:How come some of us have never had these problems?????Is it the route your ISP uses?
With the problem being very intermittent and the down periods being relatively brief and all of us accessing the site at different times, it's not surprising that some people experience the problem a lot and some people never experience it.
Heath
Central Louisiana
-10ER - SN 13927, Born 1949, Acquired October 2008, Restored November, 2008
-10ER - SN 35630, Born 1950, Acquired April 2009, Restored May 2009, A34 Jigsaw
-Mark V - SN 212052, Born 1986, Acquired Sept 2009, Restored March 2010, Bandsaw
-10ER - SN 39722, Born 1950, Acquired March 2011, awaiting restoration
Central Louisiana
-10ER - SN 13927, Born 1949, Acquired October 2008, Restored November, 2008
-10ER - SN 35630, Born 1950, Acquired April 2009, Restored May 2009, A34 Jigsaw
-Mark V - SN 212052, Born 1986, Acquired Sept 2009, Restored March 2010, Bandsaw
-10ER - SN 39722, Born 1950, Acquired March 2011, awaiting restoration
- dusty
- Platinum Member
- Posts: 21530
- Joined: Wed Nov 22, 2006 6:52 am
- Location: Tucson (Wildcat Country), Arizona
No, that does not look right. I would expect it to look more like the one that reible posted. Did you click on Trace (upper right corner) to start the trace?JPG40504 wrote:This looks too simple to be accurate! Am I missing something, or do not have it setup properly? Or have I installed a worthless version?
[ATTACH]8193[/ATTACH]
You read the ISP from a simple trace. Start/Run/Type tracert shopsmith.net click on OK
"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.
Dusty
Sent from my Dell XPS using Firefox.