Mark 2????

wannabewoodworker · Post by **wannabewoodworker** » Mon Mar 29, 2010 9:05 pm

http://cgi.ebay.com/Shop-Smith-Mark-2-Wood-Working-Lathe-Accessories_W0QQitemZ270552289466QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item3efe2c50ba

I was not aware that there was a Mark 2??? Looks from the pictures that it is authentic as the headstock casting sure looks to say Mark 2 on it anyone have more info on this???

JPG · Post by **JPG** » Mon Mar 29, 2010 9:35 pm

wannabewoodworker wrote:http://cgi.ebay.com/Shop-Smith-Mark-2-Wood-Working-Lathe-Accessories_W0QQitemZ270552289466QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item3efe2c50ba

I was not aware that there was a Mark 2??? Looks from the pictures that it is authentic as the headstock casting sure looks to say Mark 2 on it anyone have more info on this???

It was a cost reduced version of a Mark 5. Not too many produced. Unique parts not available.

The design is somewhat of a cross between a 10 and a mark 5. No internal speed control(pulleys under belt cover(motor to main shaft). Tube spacing = Mark v (both spt and way).

wannabewoodworker · Post by **wannabewoodworker** » Mon Mar 29, 2010 9:43 pm

I also found this one while perusing Fleabay. Does anyone here know this machine personally? Looks to be a refurbished machine with non-OEM paint job i.e. HERE???? Anyone recognize their work???

JPG · Post by **JPG** » Mon Mar 29, 2010 9:47 pm

wannabewoodworker wrote:I also found this one while perusing Fleabay. Does anyone here know this machine personally? Looks to be a refurbished machine with non-OEM paint job i.e. HERE???? Anyone recognize their work???

Where's da links???

wannabewoodworker · Post by **wannabewoodworker** » Mon Mar 29, 2010 10:40 pm

Crap....Sorry about that clicked too fast I guess. Go here

http://cgi.ebay.com/SHOP-SMITH-5-IN-1-TOOL-LATHE-SANDER-DRILL-PRESS-HBM_W0QQitemZ250602328860QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item3a5910131c

mikelst · Post by **mikelst** » Tue Mar 30, 2010 12:48 pm

I don,t know anything about "this" machine, but... It is a repaint, the paint appears to be the normal hammered green and silver. The way tubes look to be in good shape, the tables look good, Where is the miter gauge? Are there any Lathe tools?

If the parts are all there and it runs as good as it looks it is worth considering imho.

note the casters are not the ShopSmith retractable casters.

JPG · Post by **JPG** » Tue Mar 30, 2010 1:18 pm

wannabewoodworker wrote:Crap....Sorry about that clicked too fast I guess. Go here

http://cgi.ebay.com/SHOP-SMITH-5-IN-1-TOOL-LATHE-SANDER-DRILL-PRESS-HBM_W0QQitemZ250602328860QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item3a5910131c

An interesting 'mix'. The headstock is Greenie vintage. Not all parts have been repainted(perhaps not the 'original' pieces?). What we cannot tell is if it is a gilmer(probably) which would have a single bearing quill with different splines than later versions.

Worth considering, but you would be purchasing some one else's attempt to 'restore'.