Wheels Down

Forum for Maintenance and Repair topics. Feel free to ask questions or contribute.

Moderator: admin

Post Reply
Lodgepole
Gold Member
Posts: 286
Joined: Tue Oct 17, 2006 7:21 pm
Location: Idaho

Wheels Down

Post by Lodgepole »

I leave my Shopmith Mark V, Pro Planer and Power Station with the wheels in the down position. That way I can grab them and immediately role them to wherever I need.

Does anyone see a problem with this practice? Will the springs become compressed over time?
User avatar
dusty
Platinum Member
Posts: 21530
Joined: Wed Nov 22, 2006 6:52 am
Location: Tucson (Wildcat Country), Arizona

Post by dusty »

Lodgepole wrote:I leave my Shopmith Mark V, Pro Planer and Power Station with the wheels in the down position. That way I can grab them and immediately role them to wherever I need.

Does anyone see a problem with this practice? Will the springs become compressed over time?
I don't operate with wheels down because I feel that it is a potential safety hazard. I prefer that my shop equipment not move when I am using it.
"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.
User avatar
navycop
Gold Member
Posts: 368
Joined: Fri Jan 05, 2007 9:25 pm
Location: Virginia Beach, VA

Post by navycop »

I too leave my wheels down. But only when it is against the wall of my shop. Once I have it in place I retract the wheels.
Mark V 520, Ryobi 12" mitersaw, Delta 10" tablesaw, DC 3300.
Mike
User avatar
mickyd
Platinum Member
Posts: 2999
Joined: Mon Feb 09, 2009 1:18 pm
Location: San Diego, CA
Contact:

Post by mickyd »

Only time my wheels are up is when I am using it. By design, those springs would not weaken over time if they remain in the down positiion.
Mike
Sunny San Diego
8iowa
Platinum Member
Posts: 1048
Joined: Tue Aug 01, 2006 9:26 am

Post by 8iowa »

The castors on my '83 machine have been up and down a gazillion times. Most of the time I leave them down and raise them when I want to use the Shopsmith. I don't think you have a worry here.
User avatar
joedw00
Platinum Member
Posts: 1957
Joined: Thu Jul 20, 2006 7:01 pm
Location: Wichita, Kansas

Post by joedw00 »

I too leave my wheels down. Only time my wheels are up is when I am using it. That way if I need to move it, I can just grab it.
Joe

520, Bandsaw, Beltsander, Delta Drill Press, Delta Lathe, Craftsman Planner/Jointer, Delta Planner, Mini "Greenie" Shorty 500

Being a VETERAN is an honor
Being a GRANDPA is priceless
User avatar
a1gutterman
Platinum Member
Posts: 3653
Joined: Tue Jan 09, 2007 12:45 am
Location: "close to" Seattle

Post by a1gutterman »

My wheels are always down...until it moves when I go to use it. :D
Tim

Buying US made products will help keep YOUR job or retirement funds safer.
User avatar
JPG
Platinum Member
Posts: 35600
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Post by JPG »

a1gutterman wrote:My wheels are always down...until it moves when I go to use it. :D
My wheels are always up unless it is being moved a fair distance.

Since the wheels were done without for over 4 decades, they are not dropped to move it a short distance.

Old habits die hard!

P.S. It is not moved often.
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10
E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Post Reply